Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Burleson, TX
Gate repair in Burleson usually costs between $180 and $340 for common fixes like hinge re-welds or post resets, and most jobs are completed the same day if we get the call before noon. What makes Burleson different from other cities we work in is the soil: Johnson County’s black clay expands and contracts hard enough to shift gate posts out of plumb, so a gate that stuck last week may be dragging this week. If your gate won’t latch, sags at the latch side, or scrapes the driveway, call us at (940) 412-7340 and we’ll give you a written price before any work begins.
Why Burleson Homes Are Different
Burleson grew fast along the I-35W corridor, and a large share of its subdivisions were built between 2000 and 2015 with wood privacy fencing and matching swing gates. Those gates are now fifteen to twenty years old, which means the cedar posts, the hinge screws, and the latch hardware are all hitting the failure window at roughly the same time. On top of that, Burleson sits on expansive Vertisol clay that swells after North Texas rain and shrinks hard in summer drought. The heave-and-shrink cycle slowly works gate posts loose at the base, which is why calls that come in as a “hinge adjustment” so often turn into a full post-pull-and-reset once we dig down and see what the soil has done.
Burleson also has a split housing stock that fewer neighboring cities share. Inside the city, most homes are in HOA-governed subdivisions with specific material rules for anything visible from the street. Just outside city limits, the same service area includes acreage properties with ranch-style automated slide and swing driveway gates, often built from tube steel or wrought iron. A gate company working Burleson has to know both kinds of jobs, because the HOA privacy gate and the acreage entry system fail in different ways and need different hardware. The high straight-line winds off the open plains to the south add one more local detail: they bend lightweight aluminum gate frames and strip wood boards off gate frames faster than people expect.
Our Main Burleson Services
The two calls we get most often in Burleson are the gate that won’t close or latch, and the automated opener that runs but won’t move the gate. The three pages below cover what each job involves here, including what we typically find once we get the gate open.
Gate Repair in Burleson
Most repair calls in Burleson start with a gate that drags on the ground, won’t latch, or pulls away from the hinges. The root cause is usually the same thing the clay soil does everywhere else in Johnson County: a post that has heaved or shifted enough to throw the gate out of square. We reset or replace the post, true up the frame, re-hang the gate, and adjust the latch so it catches clean. In cedar privacy gates built during the mid-2000s boom, we often find the post has rotted at the base where the clay holds moisture after rain. See exactly what this job involves at our Gate Repair in Burleson page.
Gate Installation in Burleson
Installation in Burleson is not just a matter of hanging a gate and tightening the hinges. The soil here demands post footings set below the swell line, or the gate will lean within a few seasons. HOA neighborhoods add their own layer: many require specific wood species, stain colors, or metal styles that match the fence line and the other homes on the street. On the acreage side of town, ranch-style automated entry systems often need steel posts, heavy-duty hinges sized for a longer and heavier gate leaf, and openers rated for frequent cycling. We measure, quote a written price, and build around the actual conditions of the property. Read more at Gate Installation in Burleson.
Electric Gate Repair in Burleson
When an automated gate stops responding in Burleson, we usually find one of three things: a control board that failed after a power surge, a sensor loop or safety edge that has gone out of alignment, or an actuator, the motorized arm that physically pushes the gate open, that has stripped its internal gears. Black clay soil also shifts the gate posts that the opener mounts to, and an opener fighting a leaning post burns out faster than one on a true gate. We diagnose the specific system before we touch anything and quote the fix in writing first. Details are on our Electric Gate Repair in Burleson page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Burleson
Our technicians service the opener brands most common across Burleson’s acreage and subdivision gates, including Linear, Viking, Ghost Controls, and DoorKing, along with several others. We stock common control boards, safety edges, and receiver parts locally so we are not waiting on a shipment to finish most repairs. See the full list on our brands page.
Pricing for Gate Company in Burleson, TX
| Service | Typical range in Burleson |
|---|---|
| Gate repair (general) | $180 - $340 |
| Gate installation (full, standard 12-14 ft wood gate) | $1,400 - $3,100 |
| Gate installation (18-24 ft wood gate) | $2,600 - $5,700 |
| Steel or ornamental driveway gate installation | $3,800 - $11,500 |
| Electric gate automation repair | $315 - $1,200 |
| Swing and slide gate operator installation | $2,100 - $6,000 |
| Gate opener and safety device installation | $900 - $2,400 |
| Post reset or replacement | $260 - $900 |
| Hinge re-weld or reinforcement | $180 - $420 |
| Gate opener repair | $180 - $580 |
| Slide gate roller and track repair | $240 - $680 |
| Actuator and control arm replacement | $475 - $1,150 |
What pushes a Burleson job toward the upper end of those ranges is usually the soil: a post that has heaved out of position takes longer to reset than a post in stable ground, and an automated gate mounted to shifting posts often needs new brackets, new hardware, and sometimes a re-cut gate frame before the opener will run true. HOA material requirements can also add cost when cedar, stain, or ornamental steel must match a specific existing style. Whatever the number is, you get it in writing before we turn a single bolt, and the written Kingswell Guarantee covers the repair for 365 days from the date it is completed.
Neighborhoods We Serve in Burleson
We run calls all over Burleson and the edges of its ETJ, from HOA subdivisions with wood privacy gates to acreage lots with automated entry systems. Most repair calls in the city proper get a same-day or next-day visit; acreage jobs farther out are usually scheduled within a day or two so we can bring the right operator parts.
- Mistletoe Hill
- Oak Valley Estates
- Parks of Panchasarp Farms
- Shannon Creek
- Hidden Vistas
Service Area – Cities Near Burleson
Portcullis Gate Repair serves Burleson and the surrounding Johnson County and south Tarrant County communities. If your property is just outside the city or you have a rental or family home in the next town over, we cover Crowley, TX, Joshua, TX, Alvarado, TX, and Kennedale, TX as well. Scheduling is coordinated from our Dallas-Fort Worth office, and crews serve Burleson locally.
Serving Burleson, TX - Our Local Coverage Area
We’re based in the Burleson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Burleson
Most repair calls inside Burleson city limits get a same-day or next-day visit, depending on when you call and how far out the property sits. Calls for an automated gate that won’t open at all get priority so you are not locked out of your own driveway. Call (940) 412-7340 and we’ll give you a real arrival window on the phone.
Repairs that match the existing gate usually do not need HOA approval, but replacements and visible changes often do, especially in Burleson’s newer subdivisions where material and color rules are written into the covenants. We can work from the HOA’s spec sheet and quote exactly what the association requires. Check with your HOA first, then call us for the written quote.
Yes. A significant share of our Burleson work is on semi-rural acreage lots in the ETJ just outside city limits, where automated slide and swing driveway gates are common. Those jobs often need heavier operators and steel posts, and we quote them the same way: written price first, 365-day written guarantee. Call (940) 412-7340 to schedule a look.
If your gate is dragging, leaning, or refusing to open, call Portcullis Gate Repair at (940) 412-7340 for a free estimate. We’ll give you a written price before the work starts, and back the repair with our 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burleson Customers Say
"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti