Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Kennedale
Gate repair in Kennedale usually falls into two camps: a ranch-style swing gate that’s sagged out of square, or a heavy commercial slide gate that’s binding in its track. Both are common here, and both need a technician who understands what Kennedale’s clay soil and summer heat do to metal. We’re Portcullis Gate Repair, a Kingswell company, and our crews work Kennedale daily. If your gate won’t open, won’t close, or is straining its operator, call (940) 412-7340. We’ll give you a written price before any work starts, and we answer the phone around the clock.
Why Portcullis Gate Repair Is Kennedale’s Preferred Gate Repair Company
We’ve been a Kingswell company since 2008, and every Portcullis location is independently owned and operated under the same written standard: the Kingswell Guarantee. For Kennedale homeowners, that means four things on every job. A written price before a single bolt is turned. A real arrival window, not a four-hour shrug. A clean job site when the truck leaves. And a written guarantee on the repair itself.
Our technicians arrive in uniform and background-checked, so you know who’s walking up your driveway before they get there. The 365-Day Done Right Promise backs every repair. If it fails inside that year, we return and fix it at no charge. No callbacks, no arguing, no invoice. That’s the standard Kennedale residents tell us they’d been missing from other gate companies.
Wrought Iron Gate Repair in Kennedale
Wrought iron gate repair in Kennedale is one of the most common calls we take, and it’s almost always tied to the soil under the posts. Blackland Prairie clay swells during spring rains and shrinks during summer droughts. That seasonal cycle works hinge posts loose, throws panels out of square, and eventually leaves a gate so far out of plumb that the operator arm binds and the motor overheats. A sagging wrought-iron gate on a half-acre lot off Little School Road is rarely a hinge problem alone. It’s usually a post problem.
Post Reset and Hinge Rebuild
When a post heaves, the correct repair is to pull the footing, reset the post in concrete, and re-hang the gate so the panel hangs true before the operator is re-leveled and re-programmed. Skipping the post reset and just shimming the hinge buys a few weeks at best. We’ve seen too many Kennedale gates “repaired” that way fail again inside a season.
Ornamental Iron and Latch-Side Sag
Ranch-style homes built in the 1980s and 1990s often have decorative scrollwork and latch-side wear that worsens as the gate racks. We repair the weld points, true the frame, and replace hinge pins or weld plates where the original metal has fatigued. A typical wrought-iron gate repair in Kennedale runs $225-$475 for labor and standard hardware, with heavier post resets running $600-$1,100 depending on footing depth and fence line access.
Metal Gate Repair in Kennedale
Metal gate repair in Kennedale covers everything from a twist in a ranch driveway gate to a heat-expanded cantilever slide gate on Industrial Boulevard that will not travel its full track. The metal itself matters less than the geometry it’s in. A steel frame gate that bound at 3 pm on a 100°F afternoon and freed up by evening was never truly broken. It was out of true, and the heat just made it obvious.
Slide Gate Realignment and Track Work
Heavy commercial slide gates need clean rollers, true track, and frame alignment that holds across a 40-degree temperature swing. We carry rollers, guide wheels, and track hardware sized for the cantilever gates common along Kennedale’s freight corridor. When a loading dock is blocked, the cost of a gate misdiagnosed as “fine” is measured in hours of idled trucks.
Frame Straightening and Rust Repair
Rust accelerates at weld points and where panels meet the frame, especially on gates that face full sun and take irrigation overspray from nearby landscaping. We cut out the compromised section, weld in replacement stock, and re-coat the repair. A typical metal gate repair in Kennedale runs $250-$520 for frame straightening and weld work, with full track replacement on commercial cantilever gates running $900-$1,800 depending on gate length and hardware.
Trusted Brands We Service in Kennedale
Our technicians service nine major gate-operator brands, and in Kennedale we most often see LiftMaster, FAAC, BFT, Linear, and Viking on residential and light commercial properties. We stock common parts for these operators on our trucks, which means a bad control board or limit switch on a FAAC swing operator doesn’t mean waiting a week for a shipped replacement. When a Kennedale driveway gate won’t respond to its keypad, our tech can often diagnose and repair it the same day because the parts are already in the truck. If we don’t have a part, we’ll tell you the real timeline and the written price before you commit to anything.
Common Gate Repair Problems We See in Kennedale Homes
- Hinge post heave from clay soil. Blackland Prairie clay expands and contracts through the year, tilting posts out of plumb until the gate racks and the operator arm strains. This is the single most common failure on half-acre and acre lots in Kennedale.
- Heat-expanded slide gates binding mid-afternoon. On summer days over 100°F, steel frames expand enough to drag in their tracks. The gate frees up by evening, but the underlying alignment problem doesn’t fix itself.
- Undersized or failing operator wiring from the 1980s and 1990s. Older ranch gates were wired for a simple remote. Adding keypads, safety photocells, or loop detectors often trips breakers or drops safety circuits, leaving the operator dead.
- Weld fatigue on ornamental iron gates. Years of seasonal movement and sun exposure crack welds where scrollwork meets the frame, especially on gates that were never re-trued after a post shift. The gate looks bowed and the latch side drags.
Pricing for Gate Repair in Kennedale, TX
Before we touch a gate, you get the price in writing. That’s The Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails. Here’s what Kennedale homeowners and businesses typically see. Wrought-iron hinge and latch repairs run $225-$475. Post resets run $600-$1,100 depending on footing depth and access. Metal gate frame straightening and weld repair runs $250-$520. Full cantilever track and roller replacement runs $900-$1,800. Operator control board replacement runs $350-$800, depending on brand. These are honest ranges for this market, not teaser numbers. The estimate is free, and the price on the invoice matches the price we quoted. If the repair fails inside a year, we come back at no charge under the 365-Day Done Right Promise.
We Also Serve Cities Near Kennedale
Our Gate Repair crews work Kennedale daily, and we also cover Arlington, Mansfield, Burleson, and Fort Worth. If you’re just outside Kennedale on a county road or acreage, call (940) 412-7340 and we’ll tell you straight whether we can get a truck to you. For a closer look at what we do across this area, see Gate Repair in Kennedale.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Kennedale
You almost certainly need the post reset and the gate re-hung; the gate panel itself is usually still salvageable. The sag you’re seeing is typically the hinge post heaving out of plumb as Blackland Prairie clay swells with spring moisture, not the gate metal failing. We pull the footing, reset the post in concrete, re-hang the gate true, and re-level the operator arm. That’s a $600-$1,100 repair in Kennedale, far less than a new gate and new posts. Call (940) 412-7340 for a written quote before you commit to replacement.
Yes, and on long Kennedale driveways it’s often the right choice. We size the solar panel and battery bank to the operator’s draw and the gate’s cycle count, then wire the keypad, safety photocells, and any loop detector to run on that power budget. The catch on older ranch gates is the existing 1980s-era wiring, which may need a clean rewire before a solar setup is reliable. We’ll give you the full written price for parts and labor before any work starts.
It’s usually heat exposing a pre-existing alignment problem. On 100°F-plus afternoons, steel gate frames expand enough to bind in their tracks, then free up by evening when temperatures drop. The gate wasn’t fine before; it was marginal. The real fix is re-truing the track, replacing worn rollers, and adjusting the frame so it holds alignment across a full summer temperature swing. If a fleet vehicle is stranded, call (940) 412-7340 and we’ll dispatch to the corridor the same day.
Yes. Any automatic gate operator installed in Kennedale must have functioning entrapment protection: safety photocells, contact edges, or both, depending on the gate type and operator. Older operators from the 1990s often lack the wiring capacity to support modern safety devices, which is why a simple keypad upgrade sometimes trips breakers or drops the safety circuit altogether. We bring the setup to current code and test the entrapment protection before we leave. The written quote includes all required safety hardware.
Yes, and in Kennedale that’s a common request. Properties along Industrial Boulevard sometimes have a commercial cantilever slide gate at the road and a smaller swing gate at an employee entrance or residence. One truck can handle both in a single visit because our techs carry hardware for both gate types. You get one written price for the whole scope, and the 365-Day Done Right Promise covers every repair on the invoice. Call (940) 412-7340 to schedule a time.
Call Portcullis Gate Repair for Gate Repair in Kennedale
If your gate is sagging, binding, or dead, call (940) 412-7340. You’ll get a live person, a real arrival window, and a written price before any work starts. That’s the Kingswell Guarantee, and it applies to every repair we do in Kennedale.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Kennedale since 2008.