Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Travis Ranch, TX
Gate repair in Travis Ranch, TX usually comes down to one of two things: a black clay soil problem or an HOA compliance problem. Most homes here were built between the 2000s and 2020s by volume builders like DR Horton and Lennar, with decorative powder-coated steel or aluminum gates installed as builder packages. Those gates look sharp on day one, but the soil under them moves more than almost anywhere else in North Texas. We’re the gate company that works with both realities. Call (940) 412-7340 and you’ll get a live person, a written price, and a technician who knows Travis Ranch before the truck ever pulls into your driveway.
Why Travis Ranch Homes Are Different
Travis Ranch is a large HOA-governed master-planned community in Forney, within Kaufman County. That one fact changes how gate work gets done here. Virtually every driveway and side-yard gate repair has to conform to HOA-approved aesthetics, materials, and specifications, not just building code. A technician who ignores the approval workflow can finish a perfectly good mechanical repair and leave you with an HOA violation notice two weeks later. We check what the HOA requires before touching a bolt.
The soil is the other complication. Kaufman County sits on some of North Texas’s most severe Vertisol clay. In summer drought, the ground contracts and pulls away from gate posts. In fall, the rains come and the same clay swells and heaves, shifting posts laterally. Gates that were plumb in July are binding or reversing by December. It’s the single most common callback driver in Travis Ranch, and it’s more pronounced here than in the sandy or loam counties to the north. A limit adjustment on the operator won’t fix it. Re-plumbing the posts with deeper concrete bell footings will.
The builder-grade post footings under many original Travis Ranch gates were minimal. On expansive clay, minimal footings fail early. That’s why so many gates in the community lean or sag within a few years of installation, even when the operator itself is still fine.
Our Main Travis Ranch Services
Most calls from Travis Ranch homeowners fall into three buckets, and each one has its own dedicated page with full pricing and local detail. Here’s the short version of what each job involves.
Gate Repair in Travis Ranch
A leaning or dragging gate in Travis Ranch is almost always a post-heave problem before it’s an operator problem. We re-plumb posts, rebuild footings where needed, replace worn hinges and rollers, and realign the leaf so it closes flush with the latch. HOA compliance is factored in from the first visit, not bolted on at the end. The full breakdown, including what you’ll pay, lives on the Gate Repair in Travis Ranch page.
Gate Installation in Travis Ranch
New gate installations here need two things most other cities don’t: HOA pre-approval and a footing plan built for Kaufman County clay. A gate that isn’t engineered for shrink-swell soil will lean within two seasons no matter how good the weld is. We handle the HOA paperwork conversation, size the posts and footings for the soil, and install the operator and safety photo eyes as part of the job. Details are on the Gate Installation in Travis Ranch page.
Electric Gate Repair in Travis Ranch
When an automated gate stops opening, reverses mid-travel, or beeps without moving, the operator is usually fighting the post shift we described above. We diagnose the board, capacitor, limit switches, and actuator, then correct the mechanical alignment so the motor isn’t working against a twisted leaf. In Travis Ranch, an electric gate repair that skips the alignment step won’t last. The full scope and pricing are on the Electric Gate Repair in Travis Ranch page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Travis Ranch
Our technicians carry parts for FAAC, BFT, Linear, and Viking operators, among others, and we know the failure patterns for each in this soil. Most common replacement parts are on the truck on the first visit. You can see the full list on our brands page.
Pricing for Gate Company in Travis Ranch, TX
| Service | Typical range in Travis Ranch |
|---|---|
| Gate inspection | $49-$99 |
| Weld repair on a steel gate | $150-$400 |
| Post re-plumbing | $300-$800 |
| Swing gate actuator swap | $650-$1,400 |
| Slide gate motor replacement | $900-$2,100 |
| Control board replacement | $350-$900 |
| Photo eye replacement | $150-$350 |
| Full gate installation | $2,500-$8,000+ |
| Electric opener installation | $1,200-$3,500 |
What pushes the price up in Travis Ranch is the soil work: if the post footings are undersized and the gate has drifted, the repair is more than a part swap. That’s the job. The price you’re quoted in writing is the price you pay, and nothing gets started until you’ve approved it.
Neighborhoods We Serve in Travis Ranch
We work throughout Travis Ranch, from the streets along Clements Drive down to the newer phases near the eastern boundary. In most cases we can have a technician out the same day you call, and typically within a two-hour window.
- Travis Ranch West
- Travis Ranch East
- Travis Ranch North
- Travis Ranch South
- Travis Ranch Central
Service Area – Cities Near Travis Ranch
While this page covers Travis Ranch specifically, our crews also run calls in the surrounding metro. If you’re just outside the community line, see our pages for Dallas, TX, Fort Worth, TX, Houston, TX, or San Antonio, FL. Dispatch is coordinated from our Dallas-Fort Worth office, and a live person answers around the clock.
Serving Travis Ranch, TX - Our Local Coverage Area
We’re based in the Travis Ranch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Travis Ranch
In most cases, same day. We keep local crews staged near Forney, and our phone is answered by a live person 24 hours a day, including holidays. You’ll get a real arrival window when you call, and we honor it.
Usually, yes. Travis Ranch is HOA-governed, and most exterior changes, including gate styles, colors, and materials, require approval. We review what your specific sub-association requires before quoting, so you don’t end up with a finished job the HOA flags later.
The quote you approve covers everything we find during the inspection, including post-heave remediation. We write the price before any work starts, and it doesn’t change after the technician opens the gate up. If something new surfaces mid-job, we stop and explain it before doing anything else.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Travis Ranch Customers Say
"Our driveway gate stopped halfway and wouldn't close, which is a problem when it's the only thing between the street and the yard. They came out same day, replaced the motor, and it's smooth again."
- Leonard Pace"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike