Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Aldine
Electric gate repair in Aldine usually runs $185-$640 for most residential jobs, while commercial slide gate work on industrial properties often lands between $800 and $2,400 depending on the operator and damage. We get to Aldine homes and businesses fast because our crews work this area every week, and we’re familiar with the specific problems Gates Bayou flood cycles and black clay soil throw at gates here. If your gate won’t open, grinds when it moves, or stopped responding to the remote, call us at (940) 412-7340. We quote the price in writing before any work starts.
Why Portcullis Gate Repair Is Aldine’s Preferred Electric Gate Repair Company
We’ve worked on enough gates along Aldine Bender Road, the Hardy Toll Road corridor, and the neighborhoods off Aldine Mail Route to know what this soil and this stormwater do to gate hardware. Most Aldine calls we take involve either a gate that sagged out of alignment after the clay shifted, or an operator that took on water near Greens Bayou. Homeowners here don’t want a gate company that sends a tech from across Houston who has never seen a flood-damaged slide gate. They want someone who knows the difference between a hinge post that can be re-plumbed and one that needs to be set in new concrete.
Dean Prescott has led our service team since Portcullis Gate Repair opened as a Kingswell company in 2008. Every tech who rolls into an Aldine driveway is background-checked and uniformed, and every job carries the same written Kingswell Guarantee: a price before the work, a real arrival window, a clean job site, and a written guarantee on the repair. That’s the Kingswell Way, and it applies to every independently owned Portcullis location, no exceptions.
Commercial Gate Operator in Aldine
Commercial gate operator work is the heaviest part of our Aldine workload. The trucking terminals, freight yards, and light-industrial compounds along US-59 and the Hardy Toll Road run high-cycle automatic operators sized for 18-wheeler access, and those systems fail differently than anything you’ll find in Humble or Kingwood. A commercial slide gate operator in Aldine typically runs $1,200-$2,400 to replace when the motor and control board are both damaged, while a control-board-only swap on a newer operator usually lands between $600 and $950. We stock parts for LiftMaster, FAAC, BFT, and Linear commercial units specifically because Aldine’s freight corridor keeps us busy on these systems.
Flood-Damaged Slide Gate Operators
Ground-level operator enclosures along the Greens Bayou drainage area take on standing water during multi-day high-water events. When that happens, the control board and motor usually die together. We routinely replace both, and we mount the new operator on an elevated concrete pad with a waterproofed enclosure. That’s the only installation method that survives an Aldine flood season.
Heavy-Cycle Slide Gates for Trucking Yards
A freight yard gate might cycle 150 times a day. Residential operators simply aren’t built for that. We spec high-cycle commercial motors and heavy-duty rack and pinion hardware for Aldine yards, and we set the operator’s limit parameters to match the gate’s actual travel distance. If a gate has been running with the wrong operator for years, we’ll tell you honestly whether retrofitting saves money or just delays the inevitable replacement.
Gate Opener Repair in Aldine
Gate opener repair in Aldine typically costs $185-$520 for residential swing gates and $350-$900 for slide gate openers, depending on whether we’re replacing a gear, a capacitor, a limit switch, or the whole motor. A newer LiftMaster or Linear opener with a bad control board might only need a $200-$400 board swap. An older FAAC or Viking unit that’s been soaked by floodwater usually needs a full operator replacement instead. We diagnose on site, quote the price in writing, and get most Aldine opener repairs done in a single visit.
Control Board Replacement on Legacy Systems
Aldine has a lot of gates hung in the 1980s and 1990s, and many of those control boards are now obsolete. If we can safely retrofit a modern board onto the existing motor and wiring, we’ll do it. When the manufacturer has discontinued the board and the motor is near the end of its service life anyway, replacing the whole operator often costs less within two years than patching an old one.
We also handle keypad repair, remote control reprogramming, safety sensor replacement, and power supply diagnostics on every gate opener brand we service. If your opener just hums and won’t move, that’s usually a capacitor or gear issue, both of which are straightforward fixes we stock parts for in our Aldine service trucks.
Trusted Brands We Service in Aldine
We carry parts for FAAC, BFT, Linear, and Viking systems, plus LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule, because Aldine’s mix of old residential gates and heavy commercial operators demands it. When we roll up to a freight yard off Aldine Bender Road with a dead Viking slide operator, we usually already have the board or gear that specific unit needs on the truck. That cuts the downtime for your yard in half compared to a company that has to order parts from Dallas.
Common Electric Gate Repair Problems We See in Aldine Homes
- Heaved gate posts and misaligned panels. Aldine’s expansive black clay swells and contracts with every wet-dry cycle, shifting post footings seasonally. A gate that catches on the latch plate or drags on the driveway usually has a post that’s drifted out of plumb.
- Flooded ground-level operators. The Greens Bayou corridor floods. When standing water reaches the operator enclosure, the control board and motor often short out together. We replace these with elevated, sealed enclosures as standard practice in Aldine.
- Dead or missing safety photocells on pre-2000 gates. Gates installed before UL 325 entrapment protection became standard often run without working safety eyes, or the photocells died years ago and were never replaced. A gate that opens and closes fine can still crush a vehicle or injure someone if the safety circuit is dead.
- Worn hinge hardware on aging wrought-iron swing gates. Many Aldine homes have 40- to 60-year-old ornamental iron gates on original hinges. The hinge bolts wallow out, the gate sags, and the opener strains against the extra resistance until the motor burns out. Replacing hinge hardware early is cheaper than replacing the operator later.
Pricing for Electric Gate Repair in Aldine, TX
Here’s what Aldine homeowners and commercial property managers can expect to pay for common electric gate repairs:
- Residential swing gate opener repair: $185-$520
- Residential slide gate opener repair: $350-$900
- Commercial slide gate operator replacement: $1,200-$2,400
- Commercial control board replacement only: $600-$950
- Safety photocell replacement (pair): $120-$240
- Keypad or remote control programming and replacement: $95-$280
The biggest cost drivers in Aldine are whether the operator sat in floodwater, how far the post has heaved out of position, and whether we’re working on an obsolete system that needs more than a board swap. We quote every job in writing before any work begins, so the number on your invoice matches the number you approved. No after-the-fact additions. Call (940) 412-7340 for a free estimate.
Written by Dean Prescott, Owner at Portcullis Gate Repair, a Kingswell company serving Aldine since 2008.
We Also Serve Cities Near Aldine
Our service area covers Aldine and reaches into Houston, San Antonio, Dallas, and Fort Worth for commercial and residential gate work. If your property sits just outside Aldine, we can usually schedule within the same week. For gate repairs anywhere in the metro, contact our Electric Gate Repair team directly.
Serving Aldine, TX - Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Aldine
It depends on the board and the motor’s condition. On many 1990s and early-2000s LiftMaster, FAAC, and Linear units, we can retrofit a current control board onto the existing motor and wiring for $200-$400, which buys you several more years. If the board is obsolete and the motor has already been through floodwater or is drawing high amperage, replacement is usually the cheaper answer within two years. We’ll show you the numbers for both options before you decide. Call (940) 412-7340 for a straight answer on your specific gate.
Aldine sits on expansive black clay that swells when wet and shrinks when dry. That seasonal heaving moves the post footing under your slide gate, which throws the track and the rack and pinion out of alignment. A gate that ran smooth in July can drag or bind by December. We fix the alignment and, where the heaving is severe, re-set the post in a deeper concrete footing with more mass to resist the soil movement. Call (940) 412-7340 and we’ll check your post before we adjust the gate.
Yes. Any automatic gate installed or significantly modified after UL 325 became the industry standard must have functioning entrapment protection, which means safety photocells, contact edges, or both. Many older Aldine freight yard gates run with dead or missing safety devices, and that creates real liability exposure for the property owner. We can add or repair photo eyes on almost any existing operator, and we’ll verify the entire safety circuit before we leave. Call (940) 412-7340 for a safety inspection on your gate system.
We elevate the operator on a concrete pad that puts the motor and control board above the high-water line for your specific site, then install a sealed, weatherproof enclosure with better drainage than the factory plastic box. For gates that sit in known flood corridors, we also recommend a surge-protected disconnect so a power spike during a storm doesn’t cook the board. This is standard practice for us in Aldine, not an upsell. Call (940) 412-7340 to get your gate assessed before the next big rain.
In Aldine, sag is almost always the hinge post first. The clay heaves the post out of plumb, the gate panel follows, and the latch side drags. The panel itself usually stays square unless it’s rusted through at the hinge mounts. We check both: if the post is the culprit, we re-set it in fresh concrete; if the panel has structural rot, we’ll weld in a replacement section or recommend a new gate panel. Either way, you’ll know the price before we start. Call (940) 412-7340 for a free on-site assessment.
Our Aldine crews are dispatched from our Houston metro office and usually reach Aldine addresses within 60-90 minutes on emergency calls. We answer the phone live 24/7, so a freight yard with a gate stuck open at 2 a.m. talks to a person who can dispatch a tech, not a voicemail tree. Call (940) 412-7340 anytime, day or night.