Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Aldine, TX
Gate repair in Aldine means working on industrial slide gates at trucking yards and freight terminals as often as residential driveway gates. If you’re searching for a gate company in Aldine, TX that can handle both, we’re the ones to call. Our technicians service nine major gate-operator brands including FAAC, BFT, and Viking, and we stock parts for the heavy-duty operators Aldine’s commercial corridor depends on. Every job comes with a written price before any work starts and a written 365-Day Done Right Promise behind the repair. Call (940) 412-7340 and you’ll talk to a live person, any hour, any day.
Why Aldine Homes Are Different
Most Aldine homes were built between the 1960s and 1980s, and a significant share are manufactured homes on perimeter lots. The gates on these properties are typically chain-link or light wrought-iron swing gates with hardware that has weathered decades of Gulf Coast humidity. What really separates Aldine gate work from other Houston suburbs is the soil. The black clay under Aldine expands and contracts with every wet-dry cycle, heaving gate posts out of plumb and throwing swing gates out of alignment seasonally. A gate that hangs square in March can bind by June without a single hinge touched.
The other wildcard is water. Aldine sits in the Greens Bayou flood corridor, one of the most flood-prone areas in Harris County. When high water comes through, ground-level automatic gate operators take the hit first: control boards, motors, and limit switches submerged in silty water rarely survive. After a major rain event, our Aldine call volume shifts heavily toward slide gate operators along the Hardy Toll Road and US-59 industrial corridors that need full motor and control-board replacement. We stock waterproofed operator enclosures and elevated mounting hardware specifically for this environment because standard ground-level installs simply don’t last an Aldine flood season.
Our Main Aldine Services
Aldine homeowners and businesses call us for three things most often: fixing gates that won’t open, replacing gates that are beyond repair, and repairing electric operators on automatic systems. Each service has its own page below.
Gate Repair in Aldine
Gate repair in Aldine runs the gamut from a sagging residential swing gate to a 40-foot industrial slide gate at a trucking terminal. We replace hinges, weld cracked frames, reset posts, and rebuild wheel assemblies and track on slide systems. Aldine’s clay soil means post resets are among our most common repairs, since a leaning post throws the entire gate out of spec. Every repair includes a written price up front and a written guarantee. For a detailed breakdown of what repairs cost and what’s included, see Gate Repair in Aldine.
Gate Installation in Aldine
New gate installation in Aldine starts with a straight talk about your property. For residential lots, we measure the opening, check post depth, and recommend a gate material that can handle the humidity and clay-swell environment. For commercial yards along the Hardy Toll Road and US-59, we size the gate and operator for 18-wheeler traffic and high daily cycles. We quote the full job in writing before anything is ordered. That includes the gate, hardware, operator, and labor. See Gate Installation in Aldine for what a full install includes.
Electric Gate Repair in Aldine
Electric gate repair in Aldine often starts at the operator box. We diagnose and repair actuators, control boards, loop detectors, photo eyes, and keypads on automatic gate systems. In Aldine’s flood-prone areas, we frequently replace water-damaged control boards and motors with units mounted higher and housed in sealed enclosures. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, and our technicians arrive already knowing the system on your gate. For a full breakdown, visit Electric Gate Repair in Aldine.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Aldine
We carry parts and service experience for FAAC, BFT, Linear, and Viking operators, among others. Since we stock common control boards and actuators locally, many Aldine repairs are completed same-day rather than waiting on a shipped part. See our brands for the full list of what we service.
Pricing for Gate Company in Aldine, TX
| Service | Typical range in Aldine |
|---|---|
| Gate repair service call | $75-$125 |
| Chain-link gate hinge replacement | $120-$240 |
| Wrought-iron gate weld repair | $150-$350 |
| Swing gate post reset (concrete set) | $250-$500 |
| Slide gate wheel/track repair | $200-$450 |
| Control board replacement | $300-$650 |
| Actuator (operator arm) replacement | $600-$1,200 |
| Full automatic operator replacement | $1,500-$2,800 |
| New residential swing gate (installed) | $1,800-$5,000 |
| New commercial slide gate (installed) | $4,000-$12,000+ |
Two things push Aldine pricing above what you’d see in drier parts of the Houston area. First, flood-damaged operators often need both a new motor and a new control board, not just one. Second, Aldine’s clay soil means post resets require deeper concrete footings to stay stable through wet-dry cycles. Whatever the number, you get it in writing before any work begins, and that written price is what you pay.
Neighborhoods We Serve in Aldine
We serve the entire Aldine area, from residential pockets off Aldine Mail Route Road to industrial properties along the Hardy Toll Road and US-59 corridors. Our typical response time in Aldine is same-day or next-business-day for repair calls.
- Northside Aldine
- Greenspoint
- East Aldine
- Hidden Valley
- Westfield
Service Area – Cities Near Aldine
We also work throughout the greater Houston metro and beyond. Crews serving Aldine regularly dispatch to Houston, TX, Dallas, TX, and Fort Worth, TX. We also serve San Antonio, FL for customers with properties in both states. If you’re unsure whether we cover your address, call and ask; a live person answers around the clock.
Serving Aldine, TX - Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Aldine
For repair calls in Aldine, we typically arrive same-day or next-business-day. Emergency calls for a gate stuck open, stuck closed, or a security breach at a commercial property are prioritized. Call (940) 412-7340 and tell us what’s happening, and we’ll give you a real arrival window.
Most gate repairs in Aldine don’t require a permit. New installations with concrete footings or electrical runs sometimes do, depending on the scope. We handle permit coordination as part of the written quote for installs. Call (940) 412-7340 and we’ll tell you what applies to your property.
Yes. We service residential driveway gates as well as heavy-duty slide gates and automatic operators at Aldine’s trucking yards and freight terminals. The same written price promise and 365-Day Done Right Promise apply to both. Call (940) 412-7340 for a free estimate on any gate project.
Contact
If you need gate repair in Aldine, TX, call Portcullis Gate Repair at (940) 412-7340 for a free estimate. You’ll get a live person on the line, a written price before any work starts, and a written guarantee on every repair we complete.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aldine Customers Say
"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva"The opener gave out and we were manually pushing the gate for a week. Portcullis got us in quick, swapped the opener, and set up the remotes for both our cars. Great to have it working again."
- Priscilla Nava"Our driveway gate stopped halfway and wouldn't close, which is a problem when it's the only thing between the street and the yard. They came out same day, replaced the motor, and it's smooth again."
- Leonard Pace