Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Argyle
Electric gate repair in Argyle typically runs $185-$620 for most opener, operator, and alignment work, with a technician usually at your driveway within 24-48 hours for non-emergency calls and faster for a gate stuck open. The catch in Argyle is that a gate that won’t close often has nothing to do with the motor. Denton County’s shrink-swell Blackland Prairie clay heaves gate posts out of plumb through the summer, which racks the panel and trips the safety photocell mid-swing. That’s a structural diagnosis, not an electronics one, and it’s the single most common call we run on Argyle estates.
Our Electric Gate Repair team works on everything from that clay-heaved post to a dead control board on a LiftMaster swing operator. We know the custom ornamental iron gates off US-377, the heavy tubular-steel driveway entries on FM 407, and the underground operators on Argyle’s horse farms. Call (940) 412-7340 and a live person answers, day or night.
Why Portcullis Gate Repair Is Argyle’s Preferred Electric Gate Repair Company
Argyle gate work is different from gate work in Flower Mound or Denton. Out here, a gate is not just a convenience at the end of a driveway. It’s horse fencing, it’s livestock containment, and it gets hit by trailers and feed trucks. We arrive knowing that. Every technician carries experience with rack-and-pinion slide gates, underground swing operators, and heavy ornamental iron that weighs far more than a standard suburban gate.
Every repair we do in Argyle carries the Kingswell Guarantee in writing: the price before any work starts, a real arrival window, a clean job site when we leave, and a written guarantee on the repair itself. If the fix fails inside 365 days, we come back and correct it at no charge under our 365-Day Done Right Promise. Dean Prescott, who leads Portcullis Gate Repair, insists on that standard for every Argyle job because he’s watched too many homeowners get burned by a gate company that fixed the symptom and ignored the post leaning two inches out of plumb behind it.
We answer the phone around the clock. Not a voicemail tree, not a callback request. A person, every time, including holidays. If your gate is stuck open on a Saturday morning with horses in the pasture, you’ll talk to someone who understands the urgency.
Gate Opener Repair in Argyle
Gate opener repair in Argyle usually runs $195-$480, depending on whether the problem is in the actuator, the control board, or the power supply. Most opener failures on Argyle properties come from one of two sources: the shrink-swell clay shifting the operator’s mounting bracket out of alignment, or a power surge from a North Texas storm taking out the board. Either way, the operator is the motorized unit that physically moves the gate, and when it strains against a misaligned panel, it burns itself out faster than it should.
Actuator and Limit-Switch Failures
The actuator is the motorized arm that pushes a swing gate open and pulls it closed. On heavy Argyle iron gates, a worn actuator makes a grinding noise and may stall halfway through travel. If the limit switches are set wrong, the gate over-travels and slams the post. We recalibrate limits or replace the actuator and show you the written price before we touch a bolt.
Control Board Replacement
A dead control board means the keypad lights up but nothing moves, or the gate ignores every remote. Boards on Linear, Viking, and DoorKing operators fail from moisture ingress, insects, and power surges. We stock common boards for Argyle jobs and test the full circuit before declaring the board dead. Replacing a board unnecessarily is not how Dean runs this company.
Automatic Gate Repair in Argyle
Automatic gate repair in Argyle most often means diagnosing the whole system, not just the motor. When a custom ornamental gate reverses mid-swing, the safety photocell gets blamed, but the real cause is often the post footing heaving in the clay and racking the panel so the photocell beam breaks. Pricing on full automatic gate repair runs $235-$620, which covers the diagnosis, the mechanical correction, and the electronic recalibration.
Safety Photocell and Loop Detector Service
The photocell is the small transmitter and receiver pair near the bottom of the gate that stops it if anything crosses the path. If a gate won’t close or keeps reversing, the photocell often gets misdiagnosed as faulty when the panel is actually twisted. We check plumb on both posts first, then test the photocell circuit, then move to the operator. On Argyle horse properties, we also check the loop detector in the driveway that opens the gate when a truck or trailer crosses it.
Underground Operator Repairs on Estate Entries
Many Argyle estates use underground swing-gate operators because they keep the entry clean and uncluttered. After years of Blackland Prairie moisture cycling, the buried cylinders seize or corrode. The electronics test fine; the operator cylinder is the failure. We excavate carefully, replace the cylinder, and re-seal the vault so water intrusion doesn’t put you back in the same spot in 18 months.
Trusted Brands We Service in Argyle
We carry service experience across nine major gate-operator brands, and on Argyle jobs we most commonly see LiftMaster, Linear, and DoorKing on residential estate entries, plus Viking and Ghost Controls on ranch and equestrian gates. Having the right board or actuator on the truck the first trip means your gate is back in service faster, and we keep common parts stocked for Argyle customers because we know a gate stuck open on a horse property can’t wait a week for a part to ship. Every tech arrives background-checked, in uniform, and ready to work on the specific operator on your property.
Common Electric Gate Repair Problems We See in Argyle Homes
- Clay-soil footing heave tilting hinge posts out of plumb. Argyle sits on shrink-swell Vertisol clay, and by July a post that was plumb in March has shifted. The gate panel racks, the photocell trips, and the opener strains against a geometry problem no limit-switch adjustment can fix.
- Horse-trailer and feed-truck strikes bending slide gate frames. Long private driveways on Argyle’s equestrian estates see gates hit by trailers, tractors, and delivery trucks. The frame bends, the rack-and-pinion rail misaligns, and the operator loses calibration even when the electronics are perfect.
- Underground operators seized from moisture cycling. Estate entries with buried swing operators deal with Blackland Prairie moisture that seeps into the vault, corrodes the cylinder, and seizes the mechanism over several seasons. The electronics test fine, which is why a generic tech who only reads the board misses the real problem.
- Safety photocell failures on warped custom gates. Ornamental iron gates on Argyle’s custom-built homes are heavy, and when the panel shifts even slightly, the photocell beam breaks. Homeowners call it an “operator problem,” but the fix is mechanical first, electronic second.
Pricing for Electric Gate Repair in Argyle, TX
Here are the honest numbers. A keypad replacement runs $145-$260. A photocell repair or replacement runs $160-$320. Control board replacement runs $225-$520. An actuator swap on a swing gate runs $285-$610 parts and labor. A full post-footing reset, which is the Argyle clay-soil correction we talk about throughout this page, runs $450-$950 depending on how far out of plumb the post sits and whether the footing needs re-pouring. What drives cost is what’s actually wrong: a post that heaved is a structural job, not a $50 limit-switch adjustment. We write the price down and hand it to you before any work starts. If you want a firm number for your gate, call (940) 412-7340 and we’ll schedule a free on-site assessment.
We Also Serve Cities Near Argyle
If you’re outside Argyle proper, we also run service calls into Argyle neighbors like Flower Mound, Roanoke, Lake Dallas, and Denton. The same written guarantee applies everywhere we work. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews serve Argyle locally.
Serving Argyle, TX - Our Local Coverage Area
We’re based in the Argyle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Argyle
Probably not. Argyle sits on Denton County’s shrink-swell Blackland Prairie clay, and the soil dries out through summer, heaving the hinge post out of plumb. The gate panel racks, the photocell beam breaks, and the opener reverses or stalls. It looks like an operator failure but it’s a post-footing problem, and no limit-switch adjustment fixes it without addressing the leaning post first. Call (940) 412-7340 and we’ll diagnose the post before touching the electronics.
Yes, that’s most of what we do in Argyle. Ornamental iron and heavy tubular-steel automated driveway gates demand different handling than a light aluminum suburban gate. We carry the tools and replacement parts for heavy swing and slide gates, including sag corrections on hinge welds, rack-and-pinion rail work, and underground operator service for estate entries.
We service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. On Argyle properties we most commonly work on LiftMaster, Linear, DoorKing, Viking, and Ghost Controls systems. The tech we dispatch arrives knowing the specific operator on your property, not learning it on site.
Yes, and not just for safety. A gate without a functioning photocell will not pass a proper inspection, and on a heavy Argyle iron gate it’s a real hazard if it closes on a person, a horse, or a vehicle. On multi-acre properties with horses, a working safety system is non-negotiable. We’ll replace the photocell, realign the beam, and test the full safety circuit before we leave.
That’s a common call on Argyle equestrian properties. The trailer impact bends the slide gate frame or the rack-and-pinion rail, which throws the operator out of calibration. We straighten or replace the frame section, realign the rail, then recalibrate the operator limits and force settings so it doesn’t burn itself out fighting a misaligned gate. Call (940) 412-7340 for a free assessment, and we’ll write the price down before any work starts.
Call Portcullis Gate Repair for Electric Gate Repair in Argyle
If your Argyle gate won’t close, won’t open, or grinds and shudders halfway through travel, call (940) 412-7340. We’ll answer, ask the right questions, and schedule a time that works for you. You’ll get a written price before any work begins, a real arrival window, and a written Kingswell Guarantee on the repair for 365 days. If the fix fails, we come back at no charge. That’s the Kingswell Way: say the price, show up in the window, leave the site clean, and put the guarantee in writing. It’s how Dean Prescott has run Portcullis Gate Repair since 2008, and it’s how we’ll handle your gate in Argyle.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Argyle since the company’s founding in 2008.