Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Clovis
Electric gate repair in Clovis usually means one of two things: an operator that’s burning out because the gate itself is fighting back, or hardware that’s rusted through from San Joaquin Valley summers and Tule fog winters. If you’re looking for Gate Installation - Clovis instead of repair, we handle that too. Most repairs we handle in Clovis run $180-$520, with full operator swaps landing between $850 and $1,400 depending on the gate span and access. If your gate won’t open, won’t close, or sounds like it’s grinding teeth every time it cycles, call us at (940) 412-7340 and we’ll give you a written price before any work starts.
We’ve been repairing electric gates across Clovis long enough to know which subdivisions are hitting their aging-wave failures right now. It’s not random. It’s predictable. And we plan our parts inventory around it.
Why Portcullis Gate Repair Is Clovis’s Preferred Electric Gate Repair Company
Portcullis Gate Repair has operated as a Kingswell company since 2008, and every independently owned location, including ours serving Clovis, is bound to the same written Kingswell Guarantee: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on the repair. The 365-Day Done Right Promise means if our repair fails inside a year, we come back and fix it at no charge. That’s stamped on the invoice, not promised over the phone.
Our technicians are background-checked and arrive in uniform, so you know exactly who’s pulling into your driveway before the truck door opens. We answer calls with a live person 24 hours a day, seven days a week. No voicemail queues, no next-business-day callbacks. When a Clovis homeowner calls about a gate stuck half-open on a foggy December evening, someone picks up.
We carry service experience across nine major gate-operator brands, including Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, and Mighty Mule. That matters in Clovis because the tract-built subdivisions from the 1990s through the 2010s have a fairly narrow set of operators installed by the same builders. We already know the system on your property before we arrive.
What builds trust in Clovis isn’t a slogan. It’s showing up in the window we gave, telling you the price in writing first, and standing behind the fix for 365 days. Dean Prescott leads our team, and he enforces the Kingswell Way on every job: say the price before the work, show up when we said, leave the site cleaner than we found it, put the guarantee in writing, and come back if it fails.
Commercial Gate Operator in Clovis
Commercial Gate Operator work in Clovis typically involves replacing or repairing the motorized unit that drives a wide or heavy gate: think equestrian-zoned parcels on the west side near Old Town, or gated entries on the acreage roads east of Clovis Avenue. A commercial-grade operator swap on a wide farm gate in Clovis typically runs $1,200-$2,600, including the operator, mounting hardware, and labor. The variance usually comes down to gate weight, span, and whether the existing post anchoring can be reused.
When a Heavy Gate Outgrows Its Operator
On Clovis acreage, we regularly find residential-grade operators bolted to gates they were never rated for. A 16-foot tubular steel gate with a solid infill panel puts far more strain on the drive gear than the manufacturer designed for. The first symptom is usually a slow, laboring cycle. Then the gear strips. Then the control board burns out trying to compensate. If your gate groans or creeps through its travel, the operator may already be undersized.
Undersized Operator Replacement
We calculate the actual gate weight and span before recommending a replacement operator. On long-driveway farm gates around Clovis, that often means stepping up to a commercial-duty unit from DoorKing or Viking with a higher duty cycle rating. We quote the swap in writing first, and the written guarantee covers the new operator for a full year.
Gate Opener Repair in Clovis
Gate Opener Repair in Clovis is the most common call we take in the tract subdivisions east of Clovis Avenue. Homeowners usually describe the same thing: the gate worked fine for years, then it started slowing down, then it started reversing, and now the opener just hums without moving. The repair usually involves diagnosing whether the problem is the opener itself or the gate binding against a shifted post. Expect to pay $180-$520 for most Gate Opener Repairs in Clovis, with the exact number set in writing before we touch a bolt.
When the Operator Isn’t the Root Cause
We see this weekly in Harlan Ranch and the surrounding tracts. The opener gets blamed, but the real culprit is a hinge post that’s drifted out of plumb from expansive valley clay. The operator fights the misaligned gate until the arm, gearbox, or control board gives out. If we only swap the opener, the new one dies the same way inside a year. That’s why we diagnose the gate loading first, then repair the opener.
Signs the Opener Needs Immediate Attention
A humming motor with no movement means the drive gear has likely stripped. A gate that reverses mid-cycle usually points to a safety input or a binding track. A gate that opens fine but won’t close is often a photo-eye or loop-detector fault. None of these are DIY fixes; openers carry enough torque to injure a hand or arm if the gate releases suddenly. Let a trained technician handle it.
Trusted Brands We Service in Clovis
Our Electric Gate Repair team carries parts and service experience for the brands Clovis builders actually installed: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Clovis homeowners, that means we often have the right control board, gear kit, or photo-eye on the truck the first visit. We keep a running inventory of the most common Clovis failure parts, because the tract-build wave means we know which boards and hinges go first.
Common Electric Gate Repair Problems We See in Clovis Homes
- Solar panel charge controllers failing after summer heat: Clovis summers regularly push past 105°F, which cooks the charge controllers and battery packs on solar gate openers. By spring, after months of Tule fog rusting exposed terminals, the opener won’t hold a charge. We replace the controller, battery, and terminals as a set so the system doesn’t fail again the next winter.
- Post anchors heaving in expansive clay: The clay-heavy soil around Clovis shrinks and swells with moisture. A hinge post set in that soil drifts, the gate pulls out of alignment, and the opener’s gears take the punishment until something strips. We re-set the post in concrete and re-align the operator.
- Powder coat failure on 15-30 year old tubular steel gates: The original powder coat on tract-built Clovis gates blasts through in a few summers of valley sun. Bare steel rusts, and the rust migrates into the hinge barrels and latch mechanisms. Winter fog accelerates it. The fix is mechanical: replace the corroded hardware, not just repaint.
- Rubber seals and plastic rollers cracking from UV: Those components on older Clovis tract gates harden and crack within three or four seasons of sun exposure. The gate starts dragging, then binding, then the opener stalls mid-cycle. We stock replacement rollers and seals for the common tract-gate profiles.
Pricing for Electric Gate Repair in Clovis, CA
Here’s what Clovis homeowners can expect. Gate Opener Repair, when the operator is serviceable, runs $180-$520. A full operator replacement on a standard side-yard swing gate runs $850-$1,400. Stepping up to a commercial-duty operator for a wide acreage gate runs $1,200-$2,600. The factors that move the number: gate weight and span, whether the posts need re-setting, and the operator brand. The price is written down before any work starts. You’ll never see a number added after the technician has already disassembled the gate. Call (940) 412-7340 for a free estimate, and you’ll have a real number in your hand before we loosen a single bolt.
We Also Serve Cities Near Clovis
Portcullis Gate Repair serves Clovis and the surrounding Central Valley communities. Our coverage includes Fresno, Sanger, Fowler, and Madera, with dispatch and scheduling coordinated from our Fresno, Central Valley office. If you live just outside Clovis in any of those surrounding communities, the same written-price guarantee and 365-Day Done Right Promise apply. You can read more about our local reach on our Electric Gate Repair in Clovis page.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Clovis
In Clovis, the usual cause is a solar system’s charge controller cooking in 105°F+ summer heat, then the terminals rusting through the Tule fog winter, which kills the battery by spring. The fix is replacing the charge controller, battery, and corroded terminals as a matched set, and relocating the controller out of direct sun where possible. Call (940) 412-7340 and we’ll diagnose the exact failure on your opener in one visit.
Usually it’s the post. Clovis sits on expansive valley clay that swells and shrinks, gradually pulling the hinge post out of plumb until the gate loads the hinges and opener unevenly. We re-set the post in concrete with proper depth, then replace the stripped hinges so the gate hangs true again.
Yes, and for Clovis acreage where running mains power to the gate is impractical, solar is often the only sensible option. The key is sizing the panel and battery bank to the operator’s draw, not just the gate’s weight. We’ll spec a solar system that holds charge through fog season and doesn’t cook in July. A free site measure gives us the numbers we need.
Because Clovis tract subdivisions were built out by the same builder in tight 12-month windows, using the same hardware and anchor specs on every lot. When one gate on the street hits its stripped-hinge or post-anchor failure, the houses built the same month are usually weeks behind. We fixed a LiftMaster operator on Palo Alto Court in northeast Clovis, and three doors down the same model gate was already showing the identical failure pattern.
Yes. Automatic gate operators in California must comply with UL 325 safety requirements, which include photo-eyes or an equivalent reversing mechanism to prevent entrapment. A gate operator without functional safety sensors is both a legal risk and a genuine injury hazard. We check the photo-eyes and reversing function on every repair, not just the motor. Call (940) 412-7340 if your gate reverses unexpectedly or the sensors look damaged.
When your gate fails, you want a live answer, a straight quote, and a repair that stays fixed. That’s the entire job. Call Dean Prescott’s team at Portcullis Gate Repair at (940) 412-7340 for a free estimate. We give you the price in writing before any work starts, and every repair carries the 365-Day Done Right Promise.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Clovis since 2008.