Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Clovis
Gate installation in Clovis usually runs $1,400-$8,600 depending on the gate, the operator, and the driveway width. The real question for most Clovis homeowners is not the price of the gate itself but whether the post footings, the operator, and the power plan are right for the job – and that is where we come in. Most tract-home side gates we install here are done in a day; long acreage driveways off North Locan or Academy might take two. If you are planning a new gate or replacing one that has heaved out of the clay, call us at (940) 412-7340 and we will give you a written price before any work starts.
Why Portcullis Gate Repair Is Clovis’s Preferred Gate Installation Company
Dean Prescott has run Portcullis Gate Repair as a Kingswell company since 2008, and our crews have been installing and repairing gates across Clovis long enough to know what this soil does to a post. The 365-Day Done Right Promise is a Kingswell company standard, not a marketing line: every installation carries a written guarantee, and if the repair or install fails inside that year, we come back and make it right at no charge. Clovis homeowners tend to be direct with us, and we are direct back – the price is on paper before a single bolt gets turned.
We answer the phone with a live person, 24 hours a day. When Clovis residents call us from Harlan Ranch or the Quail Lake tract, they get a real arrival window, a background-checked and uniformed technician, and a clean job site when the truck pulls away. That is the Kingswell Way: say the price, show up in the window, leave the place clean, put the guarantee in writing, and come back if it fails.
Gate Fabrication in Clovis
Gate fabrication in Clovis usually means building the gate itself – cutting and welding the steel frame, setting the hinge and latch hardware, and finishing it – rather than hanging a pre-made panel from a catalog. When a Clovis homeowner asks us for a gate that is not a stock size, we fabricate it to the inch. A custom swing gate for a northeast Clovis side yard, fabricated from tubular steel and powder-coated, generally runs $900-$2,400 installed. A fabricated steel ranch gate on an Old Town equestrian parcel, with heavier stock and longer horizontal rails, runs closer to $1,700-$3,800.
When to Fabricate Instead of Buying Stock
A stock store-bought gate works when the opening is a standard width and the hardware lines up. But Clovis tract-home side gates are often a half-inch off one way or another, and a fabricated gate bolts to the actual post spacing we measure. That is the difference between a gate that swings square and one that sags in the first summer.
Steel Selection for the Valley Sun
Fabricated steel gates in Clovis need powder-coat, not paint. Paint bakes off a black gate at 108°F, then the Tule fog gets into the bare steel and starts the rust within a season. Powder-coat is baked on and handles the temperature cycle better. We stock steel locally nearby, so fabrication for Clovis jobs is usually a 1-2 week lead, not a month.
Automatic Gate Installation in Clovis
Automatic gate installation in Clovis pairs a swing or slide gate with an operator – the motorized unit that opens and closes the gate – and the controls to run it. The Gate Installation team at Portcullis installs, wires, and programs operators across nine major brands, and we already carry service parts for Viking, Ghost Controls, and DoorKing for Clovis customers. A typical automatic gate opener installed on an existing swing gate in Clovis runs $1,600-$4,200, including the operator, mounting hardware, and safety sensors. An automatic slide gate on a wide acreage driveway runs higher, often $4,500-$8,600.
Power Planning for Long Driveways
Long driveway gates in Clovis have one consistent problem: mains power rarely reaches the gate position. Trenching 200-plus feet of conduit across a property can double the cost of the job. For that scenario we specify solar gate openers with battery backup, sized for the panel weight and the number of daily cycles. Properly sized, they hold up well in our sun.
Contactors and Safety Edges
These are the pieces most people do not think about until the county asks. A contactor is a heavy-duty relay that switches the operator motor; a safety edge is the rubber strip that reverses the gate if it hits something. Both wear faster in Clovis because of the heat cycling through the control box. We install new, not re-used, on every automatic gate in Clovis.
Trusted Brands We Service in Clovis
When you call us for an automatic gate in Clovis, the technician on the truck already knows your operator. We work on Viking, Ghost Controls, DoorKing, Elite, FAAC, BFT, Linear, LiftMaster, and Mighty Mule, and we stock the common boards, contactors, and safety edges locally, so a failed operator on a northeast Clovis side gate does not wait a week for parts. Most service calls are loaded out the same day the call comes in, and we do not show up to learn your system on your time.
Common Gate Installation Problems We See in Clovis Homes
- Hinge post heave in expansive clay. The same valley clay that shifts sidewalks in Harlan Ranch and Quail Lake doesn’t leave gate posts alone. A post that moves a quarter of an inch changes the gate geometry enough that the latch stops meeting the strike.
- Baked and cracked wooden gate frames on equestrian parcels. Around Old Town Clovis, wooden ranch gates that predate the tract build-out crack and warp through 105°F-plus summers and fog winters, and by year three or four the hardware is stripping out of the wood.
- Fog-driven rust on exposed hardware and operator terminals. Tule fog sits on bare steel for weeks every winter. Exposed hinge pins, latch bolts, and solar operator terminals rust faster in Clovis than in drier parts of the Valley.
- The tract-home aging wave. Because entire Clovis subdivisions were built by the same contractor in the same 12 months, we see one house’s gate post and hinge failures replicate down the block within weeks. The install scoping changes when you know the whole street is about to follow.
Pricing for Gate Installation in Clovis, CA
Here is what we quote in Clovis, with the understanding that every price is written on the estimate before we start:
- Custom fabricated tubular steel side gate, installed: $900-$2,400
- Fabricated steel ranch gate, Old Town equestrian width: $1,700-$3,800
- Automatic opener on an existing swing gate: $1,600-$4,200
- Automatic slide gate, wide driveway, full install with solar: $4,500-$8,600
Material thickness, gate width, the operator brand, and whether we trench power or specify solar all move the number. What does not change: you get the number in writing before we turn a bolt, and the written guarantee follows on every install. Call (940) 412-7340 for a free estimate in Clovis.
We Also Serve Cities Near Clovis
We install gates throughout the surrounding valley. Most of our crews stage near Clovis, and we regularly run jobs in Clovis, Fresno, Sanger, Fowler, and Madera. Dispatch and scheduling are coordinated from the Central Valley office; crews are local to the area.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Clovis
Yes, and it is the standard solution for long-driveway acreage gates here. We specify a solar gate opener with a battery bank sized for the panel weight and daily cycles, so the gate runs without trenching conduit from the house. On a wide driveway off North Locan Avenue we installed a 20-foot slide gate on a rack and pinion drive, solar-powered with battery backup, and it has run through the fog season without a stall. Call us at (940) 412-7340 with the gate width and we will spec the right operator and panel package.
We install slide-gate systems up to 40 feet and swing-gate operators well beyond standard residential widths. The operator is matched to the panel weight and the hinge or track load, so a 20-foot steel slide gate gets a heavier drive than a 12-foot tubular swing gate. We have done exactly this scoping on acreage properties up North Locan and Academy. Call (940) 412-7340 and we will quote from the actual gate dimensions and material, not a guess.
In most Clovis tract homes the sag comes from the post, not the gate panel. The expansive valley clay heaves the hinge post slightly out of plumb, and that twists the whole geometry. Rehanging the panel on the same bad post buys you a season, not a fix. The proper repair is a new post footing dug deeper, with a heavier anchor spec, and the post reset in concrete before the panel goes back. Call (940) 412-7340 for an assessment – the estimate is free and written.
Yes. The summer heat cycles the contactor and capacitor in the operator control box, and the fog then rusts any unprotected terminals, limit-switch contacts, and mounting hardware. A Viking or DoorKing operator on a permanent-mount Clovis gate will still run for years if the control box is sealed and the hardware is coated, but the cheap DIY installs fail here within two or three seasons. We install for that specific heat-fog cycle. Call (940) 412-7340 and we will tell you straight what will last and what won’t.
Automatic gates in Clovis and unincorporated Fresno County must have a safety reversing device – either a monitored entrapment protection, like photo eyes or a contact safety edge, or an inherent entrapment sensor in the operator itself – per current UL 325 and the California Building Code. An automatic gate without working safety gear is dangerous, especially on acreage properties where livestock, children, and vehicle traffic mix. Our automatic gate installations in Clovis include the required safety equipment and we test it before we leave. Call (940) 412-7340 for an install.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Clovis since 2008.