Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Everman
Electric gate repair in Everman usually means one of two things: a motor that quit, or a gate that no longer swings true because the Blackland Prairie clay under it has shifted. We fix both, and we quote the price in writing before any work starts. Call (940) 412-7340 and you’ll get a live person, not a voicemail tree, any hour of any day. Our techs know Everman’s ranch-style lots, its clay soil, and the particular way a 1970s tubular steel gate fails after forty years of Texas weather.
Most Everman calls we run are same-week, and plenty are same-day when a gate is stuck shut and a car is trapped in the driveway. We’re not guessing from across town. We keep common parts for LiftMaster, FAAC, Viking, and DoorKing operators on our trucks, so a technician who pulls up near Everman High School is likely holding what your gate needs.
Why Portcullis Gate Repair Is Everman’s Preferred Electric Gate Repair Company
Portcullis Gate Repair has been doing this work since 2008, and the Everman jobs we take on follow the identical written standard as every Kingswell company: written price, real arrival window, clean job site, and a written guarantee on the repair. That’s the Kingswell Way, and it’s not a slogan. It’s five plain commitments printed on every invoice.
Dean Prescott leads our team, and the techs who show up in Everman are background-checked and in uniform. You’ll know who’s at the gate before you open the door. We answer around the clock with a live person because a gate stuck open at 11 p.m. is a real problem, not something to schedule for next Tuesday. The Electric Gate Repair work we do here leans heavily on motor replacement, post resetting, and legacy opener retrofits, because that’s what Everman’s housing stock actually demands.
Every repair carries the 365-Day Done Right Promise. If the fix fails inside that year, we come back and make it right at no charge. Written on the invoice. Not implied.
Electric Gate Motor in Everman
An Electric Gate Motor in Everman is the actuator, the motorized arm or box that physically hauls the gate leaf open and closed. When it fails, the gate becomes either a fixed wall or a flapping panel. On Everman’s older ranch properties, we routinely find the original motor is a 1990s or early-2000s unit with a control board that predates today’s safety requirements. Replacement is often the cheaper honest answer once parts for a discontinued board are no longer available. A typical swing-gate actuator swap in Everman runs $650 to $1,100 parts and labor, depending on gate weight and whether the post needs resetting at the same time.
Post Shifts That Stall the Motor
When clay heaves and the hinge post leans, the gate frame racks out of square. The motor then stalls mid-travel because the rack and pinion or drive rail no longer lines up. We fix the post first, then re-square the frame, then adjust the limit switches. Skipping the post reset means replacing a motor that will fail again in the same spot.
Legacy Boards and Freeze Damage
Many Everman operators still run on control boards from the 2000s. A hard freeze like the February 2021 storm cracks plastic housings and seizes gears, and those old boards often can’t be reprogrammed. If your opener froze and hasn’t run right since, the board is usually the culprit, not the motor itself.
Gate Access Control in Everman
Gate Access Control in Everman means the keypad, remote receiver, intercom, or card reader that tells the motor when to move. When it fails, the gate doesn’t respond to the remote, the keypad won’t take the code, or the gate opens for every truck that rolls past. Most Everman homes with a perimeter fence use a basic three-remote-and-keypad setup tied to a receiver board inside the operator. A keypad replacement runs $185 to $340 installed. A receiver board swap is typically $220 to $420, and a full access retrofit for a gate that’s ready for modern keypad and app control starts around $500.
Remote and Keypad Failures on Older Systems
Old receiver boards lose their memory, and remotes that worked for a decade suddenly don’t. Reprogramming sometimes fixes it. More often, the board itself has degraded, and replacing it with a current receiver is the lasting fix. We stock replacements for LiftMaster, Linear, and DoorKing systems on the truck.
Safety Sensors and Photo Eyes
Everman ranch gates often predate safety photo eyes entirely. When we’re already in a gate, we recommend adding sensors that stop the gate if a child or a dog crosses the path. It’s a modest add-on, usually $150 to $225 per side, and it brings the gate closer to current safety practice without replacing the whole operator.
Trusted Brands We Service in Everman
We service nine major gate operator brands, and on Everman calls the ones we see most are LiftMaster, FAAC, Viking, and Ghost Controls. DoorKing shows up on commercial and multi-family gates around town. Because Everman’s gate stock is older, we carry common Legacy and Estate series parts locally rather than ordering every board from a warehouse two states away. That’s why a motor swap near Oak Grove Road often happens in one visit instead of two. Training across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite means the tech who arrives already knows your system’s wiring and its failure points.
Common Electric Gate Repair Problems We See in Everman Homes
- Post heave from Blackland clay. The soil under Everman expands every wet spring and shrinks in summer. A gate post set in a standard tube form can kick two inches out of plumb in a year, which racks the frame and stalls the operator.
- Rusted-through hinges and weld seams on 1950s-1980s steel gates. These gates are decades past their design life. Sag correction only lasts if the post itself is sound; otherwise the hinge point keeps moving.
- Hard freeze damage to legacy operators. The February 2021 freeze cracked plastic actuator housings and seized mechanisms across Everman. Many of those boards and housings are still failing in stages, not all at once.
- Dead receiver boards in older openers. A remote that won’t pair or a keypad that forgets its code usually traces back to a failing receiver board. Reprogramming is a temporary patch; board replacement is the permanent one.
Pricing for Electric Gate Repair in Everman, TX
Here’s the honest math for Everman. A hinge post reset, including a wider and deeper concrete footing keyed into the clay, runs $400 to $800 depending on gate weight and access. A swing gate motor replacement runs $650 to $1,100. Keypad replacement is $185 to $340. Receiver board swaps run $220 to $420. A full operator replacement with modern safety photo eyes and new remotes lands between $1,200 and $2,300. The price is written before any work starts, always. We quote the job, you approve it, and that number doesn’t move mid-repair. Call (940) 412-7340 for a free estimate on your specific gate.
We Also Serve Cities Near Everman
Portcullis Gate Repair runs calls from Everman outward across the metro, so if you’re in Fort Worth, Dallas, San Antonio, or Houston, we can schedule a tech for your gate as well. Dispatch is coordinated through our Dallas-Fort Worth office, and crews stage locally. The same written price and 365-Day Done Right Promise apply wherever the gate sits.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Everman
No. Sag on an Everman gate almost always traces back to a post that has heaved out of plumb in the Blackland clay, and hinge adjustment just masks the problem for a few weeks. The lasting fix is pulling the post, resetting it in a wider and deeper footing, and then re-hanging the gate square. Call (940) 412-7340 and we’ll tell you over the phone whether your gate needs a hinge service or a post reset, and what each costs in writing before any work starts.
It depends on the operator’s age and board. If the control board is still available and programmable, we can add photo eyes, a newer receiver, and fresh limits for roughly $350 to $600. If the board is discontinued and the motor housing is cracked or seized, a new operator is the cheaper long-run answer. We’ll show you both numbers and let the math decide.
On Everman’s Blackland clay, a gate post should be set at least 36 inches deep, with a footing wider than standard tube forms and keyed or belled at the bottom so the clay can’t lift it. Standard precast tube forms at 24 inches simply won’t hold against a wet spring followed by a dry August. We key the concrete into undisturbed clay, which is what keeps the gate square through the seasonal cycle.
Check whether the breaker is on and the motor housing shows cracks. A hard freeze like February 2021 seizes gears and cracks plastic actuator bodies, and if the housing is split, the motor needs replacement rather than thawing. If the housing looks good but the gate won’t move, the board may have failed. Kill power, check for visible damage, and call us. Do not try to heat a seized motor with a torch or heat gun; the housing and wiring sit too close to plastic components and it’s easy to start a fire.
Yes. LiftMaster is the most common operator we see on Everman ranch gates, and we carry common LiftMaster Legacy and Estate parts on the truck. FAAC hydraulic and electromechanical units show up on heavier iron gates around Everman, and our techs are trained on the full FAAC line. Both brands are covered under the same written Kingswell Guarantee: 365 days, free return visit if the repair fails. Call (940) 412-7340 for a free estimate.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Everman since 2008.