Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Everman, TX
Gate repair in Everman usually costs between $185 and $480 for common fixes like hinge replacement, post realignment, and latch repair, while full operator swaps range from $800 to $1,900. Everman sits on Blackland Prairie clay that expands and contracts with every wet-dry cycle, so gates here rack out of square and pull posts out of plumb faster than almost anywhere else in Tarrant County. Dean Prescott leads our Everman crew, and we give you the price in writing before any work starts. Call (940) 412-7340 and you’ll talk to a live person, not a voicemail tree, any hour of the day.
Why Everman Homes Are Different
The thing that defines gate work in Everman is the soil. Blackland Prairie clay holds water like a sponge in spring and cracks open like a dry lakebed by August. A gate post set in a standard concrete tube form gets squeezed, tilted, and lifted by that movement. We see a lot of gates in Everman where one post has kicked out an inch or two and the latch no longer meets the receiver. The hinge side holds, the latch side drifts, and the gate starts dragging or swinging past its catch. The correct repair is not a shim or a hinge adjustment. It is digging out the footing, resetting the post deeper, and letting the concrete cure before re-hanging the gate. Anything short of that lasts until the next wet spring.
Housing stock adds another layer. Most homes in Everman were built between the 1950s and the 1980s. The gates on those properties are frequently original tubular steel or chain-link, which means 40 to 70 years of Texas sun, rain, and freeze-thaw cycles. Hinges wear oval, drop rods bend, and the metal itself gets brittle at the welds. North Central Texas does the rest: triple-digit summers warp steel frames, and the kind of hard freeze we saw in February 2021 seizes operator mechanisms and cracks plastic actuator parts. A gate in Everman works hard, sits in tough soil, and absorbs some of the most punishing weather in the state.
Our Main Everman Services
Everman homeowners call us most often for two things: a gate that won’t latch or swing properly after the soil shifted, and an electric opener that quit after a storm or a freeze. Each service has its own Everman page with full pricing details.
Gate Repair in Everman
The majority of Everman gate repairs trace back to the clay. A post shifts, a frame racks, and a gate that latched fine last month suddenly won’t close. We realign posts, replace rusted hinges and latches, fix sagging frames, and rebuild the footing when the post has moved. On older tubular steel and chain-link driveway gates, hinge and latch replacement is often the difference between a gate that fights you every morning and one that opens with two fingers. Read the full breakdown on our Gate Repair in Everman page, including pricing by repair type.
Gate Installation in Everman
New gate installation in Everman succeeds or fails at the footing. We dig posts below the clay’s active movement zone and use enough concrete to resist the push-pull of seasonal expansion. Whether you want a steel driveway gate to replace a 1960s original or a brand-new side-yard gate with modern hardware, the post is the whole job. Cheap footings are the reason replacement gates lean within two years. See what a proper install includes and what it costs on our Gate Installation in Everman page.
Electric Gate Repair in Everman
Freezing weather, lightning, and 100-degree afternoons all shorten the life of gate operator components. Everman’s winter storms are especially hard on actuator arms and control boards, and summer heat bakes plastic gears until they crack. We diagnose operator failures on FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. Several of these fail the same way: the motor runs but the gate doesn’t move, the remote stops triggering the receiver, or the control board burns out. Get the pricing and common-fault list on our Electric Gate Repair in Everman page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Everman
Our techs work daily on FAAC, BFT, Linear, and Viking operators in Everman, plus five other major brands. We stock common replacement parts for these systems locally, which means many repairs finish the same day without waiting on a shipped part. Visit our brands page to see full brand coverage.
Pricing for Gate Company in Everman, TX
| Service | Typical Range in Everman |
|---|---|
| Swing gate repair (hinges, latch, alignment) | $185-$420 |
| Post realignment and footing reset | $350-$675 |
| Chain-link gate hinge and latch replacement | $165-$310 |
| Tubular steel gate frame straightening | $220-$500 |
| Gate actuator (motor arm) replacement | $450-$950 |
| Control board replacement | $300-$650 |
| Remote/receiver reprogramming or replacement | $90-$220 |
| Full operator swap (parts and labor) | $800-$1,900 |
| New driveway gate installation | $1,400-$3,800 |
| Post replacement with deeper concrete footing | $400-$800 per post |
Prices in Everman run higher than in cities on stable soil because post work often means excavating a clay-buried footing and pouring a deeper one. You get your total in writing before the first wrench turns. If the quote says $420, the invoice says $420.
Neighborhoods We Serve in Everman
We work all over Everman, from the older streets near Enon Avenue to the ranch-lot properties around the edges of town. The soil conditions are consistent across the whole city, which means response is fast. Our crews typically reach any Everman address within 90 minutes for a repair call.
- Central Everman near Enon Avenue and Townley Drive
- Properties around Everman Parkway and Oak Grove Road
- Neighborhoods along Shelby Road
- Homes east of I-35W near the Everman border
Service Area – Cities Near Everman
Everman is home base for this page, and we also cover the surrounding region. If you’re outside the immediate Everman boundary, service coverage extends through our Metroplex dispatch network. We regularly work with property owners in Fort Worth, TX, Dallas, TX, and beyond. We also support Houston, TX and San Antonio, FL through our company locations in those areas.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Everman
Most Everman repair calls get a technician on-site within 90 minutes. Emergency calls for a gate stuck open or a fallen gate get priority dispatch. Call (940) 412-7340 and you’ll speak to a live person, not an answering service.
Everman is a small, incorporated Tarrant County city, and most gate repairs don’t require a permit. New installations or post replacement may, depending on property line and height. We check Everman requirements before starting any install job and fold that into the written estimate.
Always. You get a written quote before any bolt is turned on your Everman property. That price includes all labor, parts, and any Everman-specific work like footing excavation. If the gate fails inside the 365-day guarantee, the return visit is free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Everman Customers Say
"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick