Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Antelope
Gate installation in Antelope usually runs $1,400 to $4,800 depending on the gate type, size, and post work involved, and most jobs take one to two days once materials arrive. We know this market well because we work Antelope streets every week, from the subdivisions off Walerga Road to the newer parcels near Antelope Crossing. When you call Portcullis Gate Repair at (940) 412-7340, a live person answers, and we give you a written price before any work starts. Our Gate Installation team understands that most Antelope homes were built between about 1985 and 2005, which means thousands of original gates are now hitting the same failure point at the same time.
Whether you need a new driveway gate, a pedestrian gate, or you are replacing an operator that predates modern safety code, we show up on time, quote the job honestly, and stand behind the work with a written 365-day guarantee. That is the Kingswell Way, and it applies to every job we do in Antelope.
Why Portcullis Gate Repair Is Antelope’s Preferred Gate Installation Company
Antelope homeowners keep calling us because we do not treat gate work like a side job. Since 2008, Portcullis Gate Repair has operated as an independently owned Kingswell company, held to the same four written promises on every job: a price before the work, a real arrival window, a clean job site, and a written guarantee on the repair. In Antelope, that last part matters a lot. We frequently arrive at homes where a previous contractor replaced hardware on a gate but never addressed the post underneath, and the sag returned within weeks.
Our technicians arrive in uniform and background-checked, so you know exactly who is walking up your driveway. We provide trained service on nine major gate-operator brands, including Linear, Viking, Ghost Controls, and DoorKing, so the tech who shows up already understands the system on your property. That is why Antelope homeowners use us for installs, retrofits, and full replacements. We answer the phone around the clock, and we do not disappear after the invoice is paid. Each Portcullis location is independently owned, but the Kingswell Guarantee is the same on every job, including yours in Antelope.
Driveway Gate Installation in Antelope
Driveway Gate Installation in Antelope typically starts with a site inspection to check post footings, panel weight, and the driveway slope before we ever quote a number. Because so many Antelope driveways were built with ornamental steel or wrought-iron gates mounted on concrete or masonry pilasters during the 1990s and early 2000s, we frequently find that the original post assembly is the real problem, not the gate panel itself. A typical ornamental steel driveway gate installation in Antelope runs $2,200 to $4,800 including new posts, hinges, and an operator-ready frame. For a simpler wood driveway gate, expect $1,400 to $2,800.
Post and Footing Work on Existing Pilasters
When we install a new driveway gate on an existing pilaster, we almost always recommend checking the footing depth and the condition of any embedded hinge plates first. In Antelope’s expansive adobe clay, shallow footings have often shifted, which means a brand-new gate hung on an old post will drag within a season. We quote the post work separately and show it on the written estimate.
Operator-Ready Installs
Most Antelope homeowners who install a driveway gate also want it automated. We install the gate with an operator-ready frame, then wire the chosen opener to code with UL 325 safety protection, including photocells and edge sensors. If you already have an operator on the wall, we can often reuse it if it is still serviced and compatible with current safety requirements.
Sliding Gate Installation in Antelope
Sliding Gate Installation in Antelope is common on driveways with a slope or a short setback, where a swing gate would hit the driveway or the street. A typical residential sliding gate install runs $2,800 to $5,200 in Antelope, including the steel frame, track or cantilever hardware, and a gate operator if needed. The clay soil here plays a role, because a sliding gate does not hang from posts the way a swing gate does; instead, it rolls on a track or bolts to a cantilever system, which means footing and track alignment have to be exact.
Cantilever Systems for Uneven Terrain
Many Antelope side yards and driveways have settled over 30 years, so a ground-track slider would bind on an uneven surface. We often recommend a cantilever sliding gate, which hangs above the ground on rollers and does not need a level track bed. It costs a bit more up front, but it does not clog with gravel or fight the same soil movement.
Fitting Slide Gates on Narrow Side Yards
When a side yard is narrow, a slide gate usually makes more sense than a swing gate, since it does not need the full arc to open. We measure the setback, check the existing fence line for a place to park the gate when open, and quote the job with all hardware and safety sensors line-itemed.
Trusted Brands We Service in Antelope
We install and service operators from Linear, Viking, Ghost Controls, and DoorKing, along with five other major brands, so the technician who arrives in Antelope already knows the specific board, wiring, and programming on your system. Because these brands are common across Antelope’s tract-home neighborhoods, we keep routine parts stocked and can often complete a same-week install rather than waiting on a long parts run. If your existing gate operator uses one of these brands and you want to pair a new gate with the unit you already own, we will tell you honestly whether it is worth keeping or cheaper to replace while the gate is already open.
Common Gate Installation Problems We See in Antelope Homes
- Rotated pressure-treated posts in adobe clay. The original 4×4 posts under many Antelope side-yard gates were set in shallow footings without gravel drainage, and 30 years of wet-dry cycles have rotated them 2 to 3 inches inward, which makes the gate drag even though the panel looks fine.
- Obsolete operator control boards. Early 1990s gate operators often cannot accept modern UL 325 photocells or edge sensors, so homeowners face a choice of replacing the board or bypassing safety protections we will not install without.
- Welds loosening on steel driveway gates. In Antelope’s summer heat, raw steel gates expand and contract daily, and that stress cycle loosens welds and hinge hardware faster than in cooler coastal markets.
- Wrong post footing for new installs. Contractors who assume city permit rules often miss that Antelope falls under Sacramento County Development Services, where inspectors check footing depth in expansive clay more closely than many homeowners expect.
Pricing for Gate Installation in Antelope, CA
In Antelope, a simple pedestrian gate install runs $600 to $1,400. A wood driveway gate starts around $1,400 and goes to $2,800. Ornamental steel driveway gates run $2,200 to $4,800, and a sliding steel gate with operator typically lands between $2,800 and $5,200. What moves the number is post excavation and footing depth, panel material and weight, and whether we are installing a new gate operator or reusing what you have. We do not quote a low number and then hand you a bigger invoice at the door. The price is written before any work starts, and that same document shows the 365-day guarantee on the install. Call (940) 412-7340 for a free estimate, and we will send a technician to measure and quote in person, no obligation.
We Also Serve Cities Near Antelope
If you live just outside Antelope, we cover the same Sacramento County gate installation issues in North Highlands, Elverta, Rio Linda, and Citrus Heights. The soil, the housing stock, and the permit process are largely the same, and our crew works the whole corridor regularly. You can learn more about our work in Gate Installation in Antelope or call directly at (940) 412-7340.
Serving Antelope, CA - Our Local Coverage Area
We’re based in the Antelope area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Antelope
The hinge hardware is usually not the root problem; the post underneath has rotated in Antelope’s expansive adobe clay, and no amount of hinge tightening will fix a post leaning 2 or 3 inches off plumb. We set a new post in a deeper footing with gravel drainage, then rehang the panel and adjust the hinges, and the sag stays gone.
Yes, in most cases you need a permit, and since Antelope is unincorporated Sacramento County, the permit routes through Sacramento County Development Services, not a city building department. The county review focuses on footing depth and setback, especially in the clay soil, so we handle the permit paperwork as part of the install. Call (940) 412-7340 and we will tell you exactly what your project needs.
If the control board will not accept modern UL 325 photocells or edge sensors, retrofitting is usually not possible, and the safer answer is an operator replacement. We often save the panel itself, dump the old board and the ancient opener, and install a new operator with the required entrapment protection. You get a written price for the swap before we start.
It is usually both, but the post is the part people miss. Antelope’s 105°F summers make raw steel expand and contract daily, which stresses welds, while the clay soil slowly rotates the post and puts the whole gate in tension. We fix the post first, then re-weld and reinforce the hinge points, and the repair carries the written 365-day guarantee.
Yes, and in a narrow side yard a slide gate usually fits better because it does not need the full swing arc to open. The conversion means a new steel frame, track or cantilever hardware, and a different operator, which in Antelope runs about $2,800 to $5,200. We will measure your setback and tell you honestly if the switch is worth it or if rehanging your existing panel on a solid post is the cheaper answer. Call (940) 412-7340 for a free site evaluation.
Antelope’s unincorporated permit rules and the 1985 to 2005 tract-home construction wave mean most gate installs here are decided by what is below ground, not just what is bolted above it. If your gate predates modern safety code, or the posts have started to move with the seasons, we will give you a straight answer and a written price. Dean Prescott and the Portcullis Gate Repair crew work Antelope every week, and every job carries the Kingswell Guarantee: written price, real arrival window, clean job site, and a written 365-day guarantee. Call (940) 412-7340 and talk to a live person today.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Antelope and surrounding Sacramento County communities since 2008.