Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Cleburne
A new gate installation in Cleburne typically runs $2,800 to $9,600 depending on the gate style, width, operator, and whether we’re working on a suburban lot or a ranch entrance off the FM roads. Most driveway gate installations take one to two days on site once the gate and hardware arrive, and we quote every job in writing before a single bolt is turned. If you’re outside the Cleburne city limits on acreage, the numbers shift with the length of the power run or the need for solar. Call (940) 412-7340 and we’ll give you a real range for your specific entrance, not a vague “it depends.”
We work across Cleburne, from the historic neighborhoods near the Johnson County Courthouse to the newer subdivisions pushing east toward Nolan River Road and the ranch properties along FM 4 and FM 1434. The soil here is the thing most gate companies miss, and it matters more than the gate itself.
Why Portcullis Gate Repair Is Cleburne’s Preferred Gate Installation Company
Cleburne sits on Blackland Prairie clay that shrinks hard in dry summers and swells after rain. That cycle heaves gate posts, leans them, and makes a perfectly good gate bind or drag across the caliche. We see it every season on the acreage properties ringing the city, and we quote for it from the start. A company that only swaps panels and hardware will hand you the same failed gate after the next rain cycle. We set footings deeper, re-align posts, and then build the gate on top of that corrected base. The difference is visible the first time you open the gate in August.
Every Portcullis technician is background-checked and shows up in uniform, so you know exactly who’s pulling into your driveway. Our crews are trained on nine major gate-operator brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters when your ranch entrance runs a heavy sliding gate with a rack-and-pinion drive, not a light ornamental swing. The Kingswell Guarantee backs every installation with a written price before work starts, a real arrival window, a clean job site, and a written guarantee on the work. Dean Prescott, our owner, holds every Cleburne job to that same standard.
Gate Installation Services in Cleburne
Gate Installation Services in Cleburne cover everything from a single pedestrian walk gate to a full double swing driveway entrance, including the post footings, hinge alignment, latch hardware, and the final adjustment so the gate swings true. On Cleburne’s clay-soil acreage, the footing work is not optional. We dig deeper than the local freeze line, set posts in concrete with proper drainage, and let the base cure before the panel goes on. That’s the difference between a gate that opens cleanly in five years and one that drags after the first wet winter.
Driveway and Double Swing Gates
A standard ornamental steel driveway gate in Cleburne runs $3,200 to $7,800 installed, depending on width and the amount of custom work. Double swing gates on ranch entrances with heavy pipe frames land higher, usually $5,500 to $9,600, because both leaves need matched hinges, a center stop, and often a heavier operator. We quote the pair as one job so you’re not surprised by a second line item later.
Ranch, Livestock, and Sliding Gates
Properties along FM 4, FM 1434, and County Road 1000s often need working gates that handle cattle, hay trucks, and daily traffic. Pipe-and-panel sliding gates on these entrances run $4,800 to $8,900 with a rolling v-track and cantilever rollers spec’d for the gate’s actual weight. If you’ve got both an ornamental front gate and a working livestock gate, we quote both in a single visit and schedule the work so one truck handles the whole property.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Cleburne
Electric Gate Installation in Cleburne means pairing the right operator with the gate’s actual weight and span, then running power either from the house panel or from a solar array when the entrance sits too far from mains. We tell you which makes sense for your property and give a written price either way. A solar setup on a Cleburne ranch entrance avoids a $3,000 to $6,000 trenching bill when the gate is 300 feet or more from the barn or house. Most automatic gate installs in Cleburne run $3,500 to $8,400 including the operator, safety edges, keypad or remote entry, and all wiring.
Solar Operators for Rural Entrances
Ranch entrances off the FM roads often can’t reach utility power without a long trench. We install solar gate openers with deep-cycle battery banks sized for the panel’s weight, plus a low-voltage alert so the gate never goes dead silently. On a wide farm gate, we spec a rack-and-pinion drive rather than a light-duty arm operator, because the arm stalls on heavy livestock panels.
Keypad, Remote, and Access Control
Every automatic gate we install in Cleburne includes a keypad entry for family access, remotes for the vehicles, and entrapment protection that meets current UL 325 and ASTM F2200 requirements. We also handle phone-line or cellular entry for ranch gates where you want to buzz someone in from the house without walking to the road.
Trusted Brands We Service in Cleburne
Our Cleburne techs install and service Linear, Viking, Ghost Controls, and DoorKing operators regularly, along with LiftMaster, FAAC, BFT, and Mighty Mule. We keep common Linear and Viking parts on the truck so a same-day repair doesn’t turn into a two-trip job. If your existing gate runs something we don’t stock locally, we order from our Dallas-Fort Worth parts supply and typically have it in hand within one to two business days. The brand on the box matters less than the weight and span of your gate, and we match the operator to the load every time.
Common Gate Installation Problems We See in Cleburne Homes
- Clay-soil post heave on acreage driveways. The Blackland Prairie clay under Cleburne shrinks in dry summers and swells after rain, leaning posts and breaking hinge welds. If the footing isn’t reset and realigned, the new gate binds again inside one rain cycle.
- Triple-digit heat and spring hail on wide farm gates. North-central Texas summers warp wooden and pipe gate components, and severe spring hail bends frames and knocks solar openers out of alignment. Gates with low battery reserve fail first.
- Freeze-damaged motors on long rural driveways. The February 2021 freeze wrecked a lot of unprotected driveway gate motors across Johnson County, and we still see those failures surfacing. A properly protected motor with a battery backup avoids the repeat call.
- Undersized operators on heavy livestock panels. An operator spec’d for ornamental iron stalls when it’s asked to push a heavy pipe-and-panel farm gate. On Cleburne ranch entrances, the gate’s true weight drives the operator selection, not the brochure.
Pricing for Gate Installation in Cleburne, TX
Here are the ranges we quote in Cleburne for the gate styles we install most:
- Pedestrian walk gate: $900 to $2,200
- Ornamental steel driveway gate (single): $3,200 to $7,800
- Double swing driveway gate: $5,500 to $9,600
- Heavy pipe-and-panel sliding gate: $4,800 to $8,900
- Electric operator with safety and entry (AC powered): $2,400 to $4,800
- Solar operator package on a rural entrance: $3,800 to $6,900
What changes the number is the gate’s width and weight, the footing depth the soil demands, whether power has to be trenched or solar makes sense, and whether the entrance has two working gates instead of one. We write the full price in the quote before any work starts, and that’s the price on the invoice. Call (940) 412-7340 and we’ll give you a written range for your exact entrance, free.
We Also Serve Cities Near Cleburne
Our Gate Installation crews cover Cleburne and the surrounding Johnson County communities, including Keene, Joshua, Alvarado, and Burleson. If you’re on acreage between any of those towns, we’re already working those roads. The same written-price guarantee applies on every job we do, from one end of the county to the other. You can read more about the full scope of our work on our Cleburne service area page.
Serving Cleburne, TX - Our Local Coverage Area
We’re based in the Cleburne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Cleburne
Your gate posts are heaving because Cleburne’s Blackland Prairie clay shrinks in dry summers and swells after rain, and the posts were likely set on footings too shallow for that soil movement. Fixing it means digging the post down past the active clay layer, setting it in concrete with proper drainage, and re-aligning the hinges before the panel goes back on. Call (940) 412-7340 and we’ll look at your footing depth and tell you what’s actually moving.
Yes, if the operator is matched to the gate’s weight and the battery bank is sized for our winter sun angle. We don’t bolt a light-duty arm opener onto a heavy livestock panel; wide farm gates get a rack-and-pinion drive with a deep-cycle battery and a low-voltage alert. The gate works, and you know before the battery quits.
Every automatic gate we install meets UL 325 and ASTM F2200, which means photo eyes or contact edges at the pinch points, proper reversing on the operator, and warning signage in place before we hand the gate over. These aren’t optional add-ons; they’re part of the written quote on every electric gate install.
Yes, we still see those failures in Cleburne because many motors froze with water in the housing or had circuit boards that shorted during the thaw. If the opener is fried, we quote a replacement operator with a battery backup or freeze protection so it doesn’t happen again. The written price covers everything before we start.
Yes, we do it on Cleburne ranch properties all the time. The front gate gets the ornamental treatment and keypad entry, the working gate gets a heavy pipe panel and a solar operator sized for the load, and one truck handles both spans in the same day. That’s how we avoid making you wait on two separate appointments.
Call Portcullis Gate Repair for Gate Installation in Cleburne
If you need a new gate on a ranch entrance off FM 1434, a double swing driveway gate in a Cleburne subdivision, or a solar opener on a long rural drive, we’ll give you a written price before any work starts. Dean Prescott and our Cleburne crews answer the phone around the clock at (940) 412-7340. Free estimates, a real arrival window, and a written Kingswell Guarantee on every installation.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Cleburne and Johnson County.