Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Taylor
A new driveway or pedestrian gate in Taylor runs $2,400-$9,800 for most residential jobs including the operator, with commercial and HOA entry systems starting around $7,500 and climbing from there. We install swing gates, sliding gates, double driveway gates, and security gates on the schedule we commit to, with a written price before a single post hole is dug. Our crews know Taylor’s specific soil challenges and the newer subdivision entry systems around town, so we’re not guessing at your property. Call (940) 412-7340 for a free measure and a written quote.
Why Portcullis Gate Repair Is Taylor’s Preferred Gate Installation Company
Taylor homeowners and HOA boards call us because we answer the phone and we show up. Every installation starts with a site visit, not a vague estimate over the phone, and ends with a written guarantee stamped on the invoice. Our technicians arrive in uniform, background-checked, and they already know which operator package is on your property before they pull into the driveway. That matters in Taylor, where a wave of subdivision entry gates all went in between 2022 and 2024 using nearly identical LiftMaster and Elite Field operators. When those systems start failing, we know exactly what we’re looking at.
This location is part of the Kingswell family, and every job follows the Kingswell Way: the price is written down before work begins, the arrival window is real, the job site is left cleaner than we found it, and the guarantee is in writing. We’ve operated as a Kingswell company since 2008. In Taylor specifically, we’ve worked on everything from a 1940s swing gate on a downtown W 4th St lot to a double slide gate at a new community entrance off Carlos G Parker Blvd. The soil and the climate here create repeat problems, and we know which ones are worth fixing and which ones mean it’s time to replace.
Automatic Gate Installation in Taylor
Automatic Gate Installation in Taylor means hanging the gate panel, setting the posts, mounting the operator, running power, and programming the safety loops and remotes so the system works the first day it’s installed. Most Taylor homeowners choose automation for a driveway gate on a new rural acreage property or when a manual gate becomes impractical to open every day. A single swing gate with a basic operator typically runs $2,400-$4,200. A sliding gate, which Taylor properties with long driveways often need, runs $4,500-$9,800 depending on panel material and operator choice.
We install automatic systems from Linear, Ghost Controls, and DoorKing, and we service those same brands when they age. Before we recommend automation, we check the gate’s weight, the hinge post condition, and the movement path. On Taylor’s Blackland Prairie clay, the post condition is often the deciding factor. A gate hung on a post that has already heaved out of plumb will never automate cleanly until that post is reset or replaced.
Operators and Control Systems
We wire and program the operator package, safety photocells, edge sensors, keypads, and remotes. If you already have an operator you like, we’ll install to match it. If you don’t, we’ll spec one sized to the gate’s weight and duty cycle, not just the cheapest box on the shelf.
Power and Safety Compliance
Automatic gates need a dedicated power run and working safety sensors. We handle the electrical from the panel to the operator and configure the entrapment protection so the system passes inspection. A gate installed without functioning safety edges or photocells is a liability, and on older Taylor properties that’s the most common issue we correct during an install.
Gate Installation Services in Taylor
Gate Installation Services in Taylor cover new driveway gates, pedestrian gates, double gates, and replacement installations where an existing gate has reached the end of its useful life. A pedestrian gate with a simple latch and two steel posts starts around $900-$1,600. A double swing driveway gate with brick or stone pillars, which is the configuration most new Taylor subdivisions use, runs $5,500-$9,500 for the gate and operator package. We also install and hang the panel only, when the pillars are existing and structurally sound.
We give a written quote before any work starts. That price includes the gate, posts, hinges, hardware, and labor. It does not change after we start unless you add scope. You will never see an invoice larger than the quote for the work we agreed to do.
New Gate and Post Installation
We dig and set steel posts in concrete to a depth below the clay’s active movement zone, which is the single most important step for a gate that will stay true in Taylor. Then we hang the panel, set the reveal, and adjust the hinges so the gate swings or slides without dragging.
Retrofit and Replacement
When a Taylor gate is sagging or the operator has failed, we’ll tell you honestly whether the existing hardware can be corrected or whether replacement is the cheaper answer. Sometimes the panel is fine and the posts are the problem. Sometimes the operator died because the circuit board corroded from humidity. We walk you through it with real numbers.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Taylor
Our technicians are trained on nine major gate-operator brands, and in Taylor we most often work on LiftMaster, Elite, Linear, and DoorKing packages, especially on the newer subdivision entry systems. We also service Ghost Controls and Viking on residential driveways. Because we know these systems well, we can often source the exact board, limit switch, or receiver locally and return the same week rather than waiting on a backordered part. If you have an existing operator we don’t install, we’ll still service it and tell you straight if it’s worth keeping.
Common Gate Installation Problems We See in Taylor Homes
- Posts heaved out of plumb by Blackland Prairie clay. The soil under Taylor shrinks during drought and swells after rain, which pushes concrete-set posts sideways. The gate then drags on the ground or gaps open at the latch even after you adjust the hinge.
- Corroded control boards on 2022-2024 subdivision operators. The Samsung-driven construction wave put in hundreds of entry gates with nearly identical operator packages, and summer humidity has caused the same board corrosion across many of them. We see this same failure mode again and again.
- Missing safety equipment on older gates. Legacy swing and slide gates around Taylor’s rural acreage and older subdivisions often lack working photocells or edge sensors. These are required for safe automatic operation, and we install them on every new job or retrofit we do.
- Undersized operators on heavy gates. Many Taylor gates were hung with the cheapest operator that would move the panel on day one, but after the clay moved the posts a fraction, the motor is now overloaded and burning out. A correctly sized operator is the fix.
Pricing for Gate Installation in Taylor, TX
A basic single swing residential gate with automation in Taylor runs $2,400-$4,200. A sliding driveway gate runs $4,500-$9,800. Double gates start around $5,500 when pillars are already in place, and a full double gate with new brick or stone pillars lands between $7,000 and $11,000 depending on material and operator. The biggest cost variables are the gate panel material, the number of posts we have to set, whether we’re running new power, and whether the existing ground has been disturbed by clay movement. We quote every job in writing before we start, and the price we give is the price you pay unless you add work. Call (940) 412-7340 for a free measure. Dean Prescott and our team will walk you through the options with real numbers.
We Also Serve Cities Near Taylor
Our crews work across Taylor and the surrounding communities, including Hutto, Pflugerville, Round Rock, and Georgetown. If you’re researching Gate Installation anywhere in this part of Central Texas, the same written-price Kingswell Guarantee applies. See our Gate Installation in Taylor page for local specifics on soil, operators, and service timing.
Serving Taylor, TX - Our Local Coverage Area
We’re based in the Taylor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Taylor
Yes, unfortunately it is very common in Taylor. The 2022-2024 construction wave from the Samsung development put in dozens of nearly identical entry gate packages at once, and they are all now entering their first major service cycle at the same time. The summer humidity has produced a repeated circuit-board corrosion pattern on these LiftMaster and Elite Field operators. We have corrected this exact failure on many Taylor subdivisions, and we can usually have the board replaced and the gate cycling cleanly the same week we’re called.
The most common cause in Taylor is expansive clay movement under the posts. The Blackland Prairie soil shrinks in drought and swells after rain, which racks concrete-set posts out of plumb so the gate no longer meets the latch. Adjusting the hinge won’t fix a moving post. The correction is to reset the post deeper, or replace it and re-hang the panel. Call (940) 412-7340 and we’ll tell you which one your gate needs after we look at it.
Yes. Most legacy swing and slide gates in Taylor were installed before modern safety requirements, and they lack photocells or edge sensors. We retrofit these onto existing gates regularly. The equipment runs $300-$700 per gate depending on the operator type, and the labor is quoted in writing before we start. It’s a simple way to make an older gate safe and compliant without replacing the whole system.
When the posts are the problem, replacement is usually cheaper than repeated repairs. A gate hung on a heaved, leaning post will keep dragging and binding no matter how many times you adjust the hinges or replace the operator. The panel and an operator can be saved sometimes, but if the post has moved and the operator board is also corroded from humidity, the honest math often points to a new gate and post package. We’ll show you both options with real dollar numbers so you can decide.
Yes. A significant share of our Taylor installation work is on rural acreage tracts and small ranches around the city’s outskirts, where agricultural-style tubular steel and pipe gates are common. These properties face the same clay movement as the subdivisions, plus longer power runs for automatic operators. We quote the whole job including the electrical, so there is no surprise when the bill arrives.
Call Portcullis Gate Repair for Gate Installation in Taylor
If you need a new gate installed, an old gate replaced, or an automatic system retrofitted onto what you already have, call us at (940) 412-7340. We’ll set a real arrival window, measure the site, and hand you a written price before any work starts. Every installation carries the Kingswell Guarantee: written price, real arrival window, clean job site, and a written guarantee on the work. If something fails inside the 365-day guarantee period, we come back and fix it at no charge under the 365-Day Done Right Promise. That’s the standard on every job in Taylor, no exceptions.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Taylor and the surrounding Central Texas communities.