Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Round Rock
Gate installation in Round Rock runs between $1,800 and $7,500 for most residential jobs, with a powered swing gate on a brick-column mounting typically landing between $3,200 and $5,800 parts and labor. We quote the price in writing before any work starts, so that number doesn’t move after the technician shows up. If you’re in Teravista, Paloma Lake, Forest Creek, or anywhere else in Round Rock and the gate you bought the house with was never right, call (940) 412-7340 and we’ll come measure it properly.
What makes Round Rock different from Georgetown or Pflugerville is the sheer number of 2000s-era HOA gates that were installed manually and later retrofitted, or never powered at all. We know those subdivisions street by street, and we know what it takes to trench a conduit run through Williamson County black clay without tearing up your flower beds more than necessary.
Why Portcullis Gate Repair Is Round Rock’s Preferred Gate Installation Company
We’ve been operating as a Kingswell company since 2008, and the Round Rock work we do follows the same four promises every Kingswell location makes: a written price before any work begins, a real arrival window, a clean job site, and a written guarantee on the job. That guarantee is the 365-Day Done Right Promise. If the installation fails inside a year, we come back and correct it at no charge. Round Rock homeowners who’ve been through the no-show-and-reprice routine tell us the written price matters more than any sales pitch.
Our technicians arrive in uniform, background-checked, and already briefed on the specific operator and gate type on your property. Dean Prescott, who leads Portcullis Gate Repair, has made it a point to train every tech on the failure patterns we see specifically in Round Rock’s master-planned communities, from corroded hinge anchors in mortar joints to builder-grade operators that were undersized for the gate they’re dragging. You’ll get someone who knows what’s under your gate before the truck pulls into the driveway.
Response time to Round Rock is usually same-day or next morning for installation estimates. We schedule a measured, written quote at the time we set the appointment, not a mystery arrival window. Dispatch is coordinated from the Austin office, and crews serve Round Rock locally.
Gate Installation Services in Round Rock
Gate Installation Services in Round Rock range from setting a new ornamental iron driveway gate on brick or stone columns to replacing an old wooden gate with a steel frame that actually stays square. If you’re in a Teravista or Walsh Ranch home where the original gate has been sagging since year eight, the honest answer is often that the hinges and the mounting points need to be rebuilt before a new leaf goes on.
Driveway and Double Gate Installation
Most Round Rock driveway work is double gates, and the dominant style is wrought iron flanked by brick columns. A new double driveway gate with properly sized hinges and a concrete footer adjustment runs $2,800 to $6,200 depending on leaf width and whether we’re anchoring into solid posts or doing masonry repair first. We quote that number only after measuring your existing columns and checking how far out of plumb the black clay has pushed them.
Pedestrian and Security Gate Installation
Pedestrian gates in Round Rock subdivisions usually need a welded frame and a self-closing hinge set so the gate doesn’t slap in the wind that funnels down the open greenbelt corridors. A security-rated pedestrian gate starts around $900 and goes up with a keypad or card reader added. We’ll install the gate leaf, the closer, and the locking hardware in one visit so you’re not waiting on a second tradesperson.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Round Rock
Electric Gate Installation in Round Rock is a different job than a manual gate swap because most of these homes were never built with power or conduit at the gate line. That means the first half of the work is underground: trenching from your panel to the gate post, pulling conduit, and setting a weather-rated junction box. The second half is mounting an operator that’s actually sized to the gate’s weight and cycle count, not whatever the builder’s electrician had on the truck in 2009.
Automating an Existing Manual Gate
If your Teravista or Paloma Lake gate was installed manually and you want it automated now, it absolutely can be done. We’ll run a 12-gauge conduit line from the panel, set the operator on a concrete pad or column mount, and wire in safety photocells and an edge sensor. Budget $2,400 to $4,800 for a full automation job including the power run, because the trenching is real work through clay that fights the shovel every foot.
Operator and Control Board Installation
When the operator on a 15-year-old community gate fails, replacing it usually means a new control board, a new receiver, and often a new transmitter set for the residents. We stock and install FAAC, BFT, and Viking operators, and the control board swap is a half-day job on most models. A full operator replacement on a single-family gate with a new remote system runs $1,900 to $3,400.
Trusted Brands We Service in Round Rock
We install and service nine major gate-operator brands, and for Round Rock customers we keep common FAAC, BFT, Linear, and Viking parts on hand locally so a job isn’t waiting on a Dallas shipment. That matters when the control board dies on a Monday and the HOA meeting is Wednesday. We match the replacement operator to the gate’s actual weight and daily cycle count, not just the old operator’s horsepower rating, because undersizing is the exact reason so many original Round Rock installs failed early.
Common Gate Installation Problems We See in Round Rock Homes
- Hinge plates pulling out of brick-column mortar joints. The original anchors were set into mortar, not solid post, and after fifteen years of Williamson County clay heaving the columns, the bolts corrode loose inside the joint. A new hinge plate won’t hold until we tuckpoint or epoxy-anchor the mount first.
- Builder-grade operators that were never sized to the gate. A manual iron gate built in 2007 and automated in 2012 with a LiftMaster meant for a lighter gate cooks its own motor within a few years. We size operators by weight and cycle count on every install.
- No power run at the gate line. The majority of Round Rock’s ornamental driveway gates were built without conduit because the original buyer wanted manual. Automation means trenching from the panel, and buyers never budget for it until we hand them the written quote.
- Clay soil shoving gate posts out of plumb season after season. The ground here shrinks in the long dry summers and heaves after every heavy spring rain, and a post that was square in October isn’t square in April. A gate that drags the latch plate or over-trips the operator usually traces back to a footing that needs re-setting, not a bad motor.
Pricing for Gate Installation in Round Rock, TX
Here’s what we tell Round Rock callers before we’ve even sent a truck: a simple pedestrian gate install starts around $900. A new double driveway gate with hinge and column work runs $2,800 to $6,200. A full electric gate automation including the trench and conduit runs $2,400 to $4,800. A complete new powered gate installation with operator, safety edges, and a keypad typically lands between $3,200 and $7,500. The biggest variables are whether your columns need masonry repair and how far the power run has to travel. Every quote is written, itemized, and agreed before work starts.
We Also Serve Cities Near Round Rock
Our Round Rock crews also cover Pflugerville, Hutto, Georgetown, and Cedar Park for gate installation and repair. If you’re just over the county line, call and we’ll schedule a measure. For more on what we do, see our Gate Installation service hub, and for Round Rock specific details, visit Gate Installation in Round Rock.
Serving Round Rock, TX - Our Local Coverage Area
We’re based in the Round Rock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Round Rock
Yes, and it’s one of the most common jobs we do in Teravista. The work involves trenching a conduit line from your electric panel to the gate, setting an operator pad, and wiring in safety photocells and an edge sensor. Expect $2,400 to $4,800 depending on the run length and gate weight. Call (940) 412-7340 for a written quote, estimates are free.
Your gate columns are sitting on Williamson County black clay that shrinks in summer and heaves after heavy rain, and that cyclic movement pushes the posts out of plumb. When the column shifts, the hinge plates anchor-bolted into the mortar joints loosen, and the gate leaf drops enough to drag. The fix is epoxy-anchoring the hinge plates and re-setting the footings, not just tightening bolts. Call (940) 412-7340 and we’ll measure how far out your gate has moved.
A 15-year-old community entry operator that’s failed usually needs a full replacement: new operator, new control board, new receiver, and often new transmitter sets for residents who use the gate. We install FAAC, BFT, and Viking operators sized to the gate’s actual cycle count. A full community gate operator replacement typically runs $3,500 to $7,500. Call (940) 412-7340 and we’ll survey the gate this week.
Not unless the column itself has cracked through. In most Forest Creek homes, we can grind out the corroded anchors, epoxy new threaded rod into the mortar joint, and set a fresh hinge plate without opening the column. If the column has structural damage from years of heaving, we’ll tuckpoint and rebuild just the affected corner. We’ll tell you which one applies before we start, and the price is in writing either way.
We install FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, and we’ll recommend the right one for your gate’s weight and how often it cycles. FAAC and BFT are the most common choices for Round Rock’s heavier ornamental iron gates. Call (940) 412-7340 and we’ll give you a written quote with the operator model specified, so you know exactly what you’re getting before any work begins.
If your gate in Round Rock was built wrong, installed without power, or has been sagging on clay-shifted columns for years, we’ll give you a straight written price and a 365-day guarantee on the work. Call (940) 412-7340 for a free estimate. Dean Prescott and the Portcullis Gate Repair team answer around the clock.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Round Rock since 2008.