Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Round Rock, TX
Round Rock gates fail in patterns that don’t show up the same way in Georgetown or Pflugerville. The city’s 2000s and 2010s build-out put thousands of ornamental iron driveway gates on black clay soil that moves with every dry summer and wet winter. We see the result every week: sagging gates dragging across driveways, hinge plates pulling loose from brick columns, and operator motors burned out from fighting a gate that no longer swings true. If your gate won’t open, won’t latch, or groans when it moves, call us at (940) 412-7340 and we’ll give you a written price before any work begins.
Why Round Rock Homes Are Different
Round Rock sits on Williamson County’s expansive black clay. During long dry stretches the soil shrinks and pulls away from concrete footings; after heavy rain it swells and heaves. Gate posts set in that soil shift out of plumb season after season, and that movement is the leading reason gates drag, fail to latch, and stress automated operators until the motor gives out. It’s a repeating annual cycle here, not a one-time fix.
The housing stock compounds it. Master-planned communities like Teravista, Paloma Lake, Forest Creek, and Walsh Ranch were built in a tight window from the early 2000s through the 2010s, with HOA-governed architectural guidelines that standardized ornate wrought-iron gates mounted on brick or stone columns. Those systems are now 10 to 20 years old and hitting their peak failure years for operators, control boards, and hinges all at once. The repair demand that creates is specific to Round Rock’s growth timeline.
In Teravista and Paloma Lake especially, the HOA-standard brick-column design means hinge plates are bolted into mortar joints rather than solid posts. After years of clay movement, we routinely find the original bolts corroded and loosened inside the column. A seemingly quick hinge swap turns into tuckpointing or epoxy anchoring before a new plate can be set, and that’s a half-day job on Round Rock columns you won’t see on the cedar-framed privacy gates in the older neighborhoods near downtown. Both gate styles exist here, and they demand different tooling and a different eye.
Our Main Round Rock Services
Most Round Rock homeowners call us for one of three things: a gate that stopped working, a new gate they want built right on this soil, or an electric system that won’t respond. Each has its own page below with local pricing and detail.
Gate Repair in Round Rock
A sagging gate on clay soil is the most common repair call we take in Round Rock. We fix bent or broken hinges, re-set posts that have shifted, address dragging gate leaves, and replace hardware corroded by Williamson County’s alkaline soil. The work often means removing the gate leaf, drilling out corroded lag bolts, and re-anchoring into fresh material rather than the crumbled mortar that was there before. Full detail and local price ranges are on the Gate Repair in Round Rock page.
Gate Installation in Round Rock
New gates in Round Rock need footings designed for expansive clay, which means deeper pours and sometimes rebar reinforcing so the posts don’t move with the soil. We also work with HOA architectural guidelines, which matters in Teravista, Paloma Lake, and similar communities where the gate’s style and column design are already dictated. We measure, order, and schedule the install with a written price first, never a same-day scramble. See Gate Installation in Round Rock for what a full installation includes.
Electric Gate Repair in Round Rock
When an automated gate in Round Rock stops opening, the underlying cause is often mechanical: a gate that’s out of plumb is overworking the operator until the capacitor or control board fails. We repair the electrical side, but we also check the gate’s physical swing so the new board isn’t burned out by the same problem six months later. Certified service covers FAAC, BFT, Linear, and Viking systems among others. Details are on the Electric Gate Repair in Round Rock page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Round Rock
Our technicians are trained on FAAC, BFT, and Linear among other major gate-operator brands, so we arrive with the right experience instead of learning your system from the label. We stock common control boards and limit switches locally and can often complete a repair on the first visit. See our brands for the full list and what we cover.
Pricing for Gate Company in Round Rock, TX
| Service | Typical range in Round Rock |
|---|---|
| Gate hinge replacement (standard iron gate) | $185 - $340 |
| Gate hinge replacement with brick column anchoring | $260 - $480 |
| Swing gate actuator swap (parts and labor) | $450 - $950 |
| Control board replacement | $250 - $550 |
| Gate wheel and roller replacement | $90 - $220 |
| Gate post re-setting on clay soil | $300 - $700 |
| Electric gate safety sensor replacement | $150 - $350 |
| Gate opener remote and receiver servicing | $95 - $200 |
| Full gate installation (standard single swing) | $1,800 - $4,500 |
| Electric gate operator installation | $950 - $2,400 |
What pushes a Round Rock price higher than the low end is almost always the column work: anchoring into brick or stone that has shifted with the clay, needs tuckpointing, or hides corroded bolts beneath the surface. You’ll know that before we start because every job carries a written price before any work begins, with no after-the-fact surprises.
Neighborhoods We Serve in Round Rock
We work across Round Rock, from the master-planned communities along University Boulevard to the older lots near downtown and the newer builds east of I-35. Response times vary with where we are, but most Round Rock calls receive same-day or next-morning service depending on the nature of the job and the parts involved.
- Teravista
- Paloma Lake
- Forest Creek
- Walsh Ranch
- Downtown Round Rock
Service Area – Cities Near Round Rock
Our Round Rock crews also serve the neighboring communities where the housing stock and soil conditions differ enough to change the work. We cover Pflugerville, TX, Hutto, TX, Georgetown, TX, and Cedar Park, TX with the same written pricing and the same guarantee on every repair.
Serving Round Rock, TX - Our Local Coverage Area
We’re based in the Round Rock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Round Rock
Most Round Rock calls are answered by a live person 24/7, and we aim for same-day or next-morning service on repairs across the city. The exact window depends on where you are and whether we need a part, and you’ll get a real arrival window before we dispatch. Call (940) 412-7340 to check today’s availability.
Many Round Rock HOAs, especially in Teravista and Paloma Lake, have architectural guidelines that apply to gate styles, colors, and column materials. We recommend checking your HOA’s rules before installation or major repair. If you have the guidelines, we’ll work within them and give you a written price that reflects what the HOA actually approved.
We serve all of Round Rock, including the master-planned communities east and west of I-35, the older central neighborhoods, and the newer developments on the city’s edges. Dispatch and scheduling are coordinated from the brand’s Austin office, but the crews and the service are local to Round Rock. Call us and we’ll tell you straight whether we can hit your address in the window you need.
If your gate is dragging, stuck, or silent, call (940) 412-7340 for a free estimate. We’ll answer, give you a straight price range, and put the final number in writing before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Round Rock Customers Say
"The opener gave out and we were manually pushing the gate for a week. Portcullis got us in quick, swapped the opener, and set up the remotes for both our cars. Great to have it working again."
- Priscilla Nava"Our driveway gate stopped halfway and wouldn't close, which is a problem when it's the only thing between the street and the yard. They came out same day, replaced the motor, and it's smooth again."
- Leonard Pace"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw