Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Bronx
Gate repair in Bronx, NY usually runs $180-$680 depending on what failed, and most residential calls are completed the same day we arrive. That’s the honest range, and we’ll put your exact price in writing before a single bolt gets turned. If you live in Tremont, Fordham, Morris Heights, Highbridge, or anywhere else in the borough, call (940) 412-7340 and a live person answers, 24 hours a day. We’re Portcullis Gate Repair, and we’ve been fixing swing gates, roll-down gates, and automatic operators across Bronx since our founding as a Kingswell company in 2008.
Bronx isn’t like Westchester. It isn’t like Manhattan either. Here, you’ve got 1920s and 1930s wrought iron pedestrian gates on nearly every attached brick row house, corroding from decades of road salt and coastal air off Long Island Sound. Then a mile away, Fordham Road storefronts are cycling roll-down security gates dozens of times a day until motors burn out and slats strip. We know both problems well because we’re in those neighborhoods every week.
Why Portcullis Gate Repair Is Bronx’s Preferred Gate Repair Company
Bronx customers have been burned before. A tech who never shows. A price that doubles at the door. A repair that fails six weeks later and nobody answers the phone. We built our reputation here by doing the opposite of all three.
Every job follows the Gate Repair Kingswell Way, which means five plain commitments: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails. That last one isn’t vague. It’s called the 365-Day Done Right Promise, stamped on every invoice, and it means if the repair fails inside a year, we return and fix it at no charge. No arguing, no fine print.
Our technicians are background-checked and arrive in uniform, so you know exactly who’s walking up your front steps before the truck parks. Dispatch for Bronx is coordinated from the New York City office, and crews are positioned across the borough. Dean Prescott, who leads our service teams, has spent years training techs on the specific failure patterns of this borough’s gate stock rather than treating Bronx like a generic suburb. That focus is why property owners from Throggs Neck to Riverdale call us back when something else breaks.
Commercial Gate Repair in Bronx
Commercial gate repair in Bronx is a different animal than what you’ll find in most of the metro area. The daily abuse on Fordham Road, Gun Hill Road, and Third Avenue roll-down security gates means motor and slat failures are the most common commercial calls in the borough, not the occasional residential swing gate repair that dominates Westchester. A storefront gate on Fordham Road might cycle 30 or 40 times in a single day. That’s 10,000+ cycles a year. Motors rated for lighter duty burn out, slats get forced out of their guides, and gearboxes strip.
Typical commercial roll-down motor replacement in Bronx runs $450-$900 parts and labor, while slat repair or replacement runs $35-$85 per slat depending on gauge and finish. We quote the job in writing before ordering anything, and we stock common parts locally so a busy storefront isn’t boarded up for a week.
Roll-Down Motor and Slat Work
When a roll-down gate on Fordham Road jams on its way down, the cause is almost always one of three things: a burned-out motor, stripped slats, or a misaligned guide rail. We identify which one before touching a single component and show you the evidence. Then we give the written price.
Storefront Security Gate Maintenance
Bronx storefront operators don’t have time for an eight-hour service window. We schedule commercial work around your opening hours where possible, which means early mornings before the first customers arrive or evenings after closing. The Kingswell Guarantee applies here the same as any residential call, with the 365-Day Done Right Promise written onto every commercial invoice.
Iron Gate Repair in Bronx
Iron gate repair in Bronx means working on wrought iron that is often older than the people living behind it. The borough’s 1920s-1950s attached brick row houses were built with original wrought iron swing gates, and many of those gates are still in service today. Road salt and freeze-thaw cycles have been eating at the welds, the hinge posts, and the bottom rails for close to a century.
A typical hinge rebuild on a Bronx iron gate runs $180-$320 per hinge, depending on whether we’re cutting out the old pin and welding in a stainless replacement or rebuilding the entire hinge leaf. Post resetting, which involves excavating the footing, re-leveling the post, and re-anchoring it, usually runs $350-$700. Full weld and rust repair on a heavily corroded gate runs $250-$600. We’ll give you the exact number in writing before starting.
Hinge & Post Rebuilds on Pre-War Iron
The most common iron gate failure we see in Bronx is the bottom hinge pin wearing out or shearing off because the gate has been sagging onto it for years. We don’t patch this. We cut out the old hinge, rebuild it with a stainless pin, and reinforce the bottom rail where the weld has been eaten through. It lasts because we use materials rated for the salt this borough throws at everything.
Weld & Rust Repair on Decorative Gates
Bronx has some genuinely beautiful original iron work on homes in neighborhoods like Morris Heights and Highbridge. When the scrollwork starts separating at the welds, we grind back to clean metal and rebuild those joints rather than telling you to replace the gate. Replacement is sometimes cheaper in the short run, but on a 90-year-old gate with original detailing, a proper weld repair preserves something you can’t buy new.
Trusted Brands We Service in Bronx
If your automatic gate runs on Viking, Ghost Controls, or DoorKing, our technician already knows the board layout, the common failure points, and the programming sequence before the truck stops. We’re certified across nine major gate-operator brands, and we keep common replacement parts for those systems stocked locally so Bronx customers aren’t waiting on a ground shipment from across the country. Whether it’s a residential swing gate in Pelham Bay or a commercial operator on a Co-op City vehicular entrance, a familiar system means a faster diagnosis and a fairer price. Call (940) 412-7340 and tell us which brand is on your gate; we’ll tell you if we can fix it today.
Common Gate Repair Problems We See in Bronx Homes
- Rusted-through hinge pins and bottom rails. The road salt Bronx applies every winter plus the coastal air off Long Island Sound eats painted steel faster than almost anywhere else in the metro area. We see 15-year-old gates that look 40, especially in Throggs Neck, Pelham Bay, and City Island.
- Heaved post footings from freeze-thaw cycling. Concrete expands when it freezes and contracts when it thaws. Do that a few hundred times to a footing poured in 1935, and the post begins to lean. That’s why so many Bronx swing gates start dragging on the concrete every March.
- Burned-out roll-down motors on commercial corridors. Fordham Road, Gun Hill Road, and Third Avenue storefronts cycle their gates more in a week than a residential gate moves in a year. Motors fail, slats strip, and guide rails bend.
- Corroded operator boards shorting out. The control boards inside automatic gate operators may be sealed, but salt air finds a way. LiftMaster and Viking boards in City Island and Throggs Neck corrode years faster than they would inland, causing intermittent failures that stump technicians who don’t know the local pattern.
Pricing for Gate Repair in Bronx, NY
We believe in telling you the price before we start, not after we’ve disassembled your gate. Here’s what you’re likely looking at in Bronx: hinge repairs run $180-$320 per hinge, post resets run $350-$700, weld and rust repair runs $250-$600, motor replacements on automatic gates run $350-$750, and commercial roll-down motors run $450-$900. A full residential swing gate replacement, fabricated and installed, usually runs $1,200-$2,400 depending on size and ironwork. Those are the numbers we see across Tremont, Fordham, Morris Heights, and the rest of the borough, quoted in writing before any work begins. Estimates are free. Call (940) 412-7340.
We Also Serve Cities Near Bronx
Our Bronx crews regularly cross the borough line for customers in Mount Vernon, Manhattan, Yonkers, and Brooklyn. If your property sits right on the edge of the Bronx, reach out and we’ll let you know which team serves your street.
Serving Bronx, NY - Our Local Coverage Area
We’re based in the Bronx area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Bronx
Because the rust isn’t starting on the surface, it’s working from the inside out at the hinge pin and the weld joints, and a coat of paint only hides that for a season or two. Road salt and coastal air off Long Island Sound drive moisture into the hinge barrel, and once the pin starts corroding, the gate’s weight accelerates the wear. The only lasting fix is replacing the pin and hinge hardware with stainless or galvanized components and treating the surrounding metal before repainting. We do that on most iron gate repairs in the borough, and we’ll quote the cost up front.
Usually it’s both, because they fail together. When slats bend or strip, the gate binds in its guide rails, which forces the motor to work harder until it overheats or strips its gearbox. The first step is a visual inspection of every slat and both guide rails, then a load test on the motor. We’ll tell you which component failed first and give you a written price for the repair before ordering parts. Call (940) 412-7340 and we’ll schedule a look at your gate.
Freeze-thaw heaving in the concrete footings is the culprit. When water gets under the footing and freezes, it lifts the post a fraction of an inch. Do that for enough winters on a post set in 1940, and the gate starts to lean and drag. Realigning the gate without fixing the footing buys you a few months. The permanent fix is excavating the footing, resetting the post level, and re-anchoring it properly. We do this on Bronx row houses every spring, and the repair carries the full 365-Day Done Right Promise.
Yes. Any automatic gate system should have safety sensors or edges that stop and reverse the gate when something is in its path, and New York City code requires them on any newly installed or substantially modified system. The simple test is to place a solid object in the gate’s path while it closes; if the gate doesn’t reverse, the sensor has failed and that’s a genuine safety risk, especially with children around. Our techs test every sensor on every call and will tell you straight if yours is dead. This isn’t a DIY repair; a failing sensor on an automatic gate can cause serious injury.
We service nine major gate-operator brands, including Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Linear, Elite, and Mighty Mule. Whether it’s a residential swing operator in Pelham Bay or a commercial roll-down motor on Gun Hill Road, our techs arrive already trained on the system’s specific board, wiring, and failure points. Call (940) 412-7340 and tell us the brand; we’ll tell you what we can do and what it’ll cost.
If your gate is dragging, jammed, rusting through, or simply won’t open, call Portcullis Gate Repair at (940) 412-7340 now. A live person answers around the clock, every day including holidays. We’ll schedule a real arrival window, send a uniformed technician who knows Bronx gate hardware, and hand you a written price before any work starts. The Kingswell Guarantee and the 365-Day Done Right Promise cover every job, and that’s in writing on your invoice.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Bronx since 2008.