Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Bronx, NY
Gate repair in the Bronx means working on a housing stock you won’t find in Westchester or on Long Island. Row after row of 1920s to 1950s attached brick houses with original wrought iron front gates, pressed up against six-story pre-war apartment buildings and NYCHA developments. Add freeze-thaw cycles, road salt, and coastal air off the Sound, and you get sagging hinges, corroded posts, and rusted actuator arms as a monthly constant, not an occasional call. We’re Portcullis Gate Repair, a Kingswell company. If your gate won’t close or a hinge has pulled out of its masonry anchor, call (940) 412-7340 and we’ll give you a written price before any work starts.
Why Bronx Homes Are Different
The Bronx’s dense corridors of attached brick row houses in Tremont, Fordham, Morris Heights, and Highbridge mean nearly every front yard is enclosed by a wrought iron pedestrian gate, many of them factory originals from the 1940s and 1950s. These gates were bolted into century-old masonry piers, and the anchors are now spalling. When iron rusts, it expands and pushes against the brick, cracking the mortar around the hinge plates. A gate that merely sagged in 1990 now needs its hinge posts reset and rebuilt, not just shimmed.
The climate compounds it. NYC’s freeze-thaw cycles heave the concrete footings that carry gate posts. Road salt applied all winter on Bronx streets sits on the base plates and lower rails of every front gate. By March, we see a surge of calls from homeowners whose gates have dropped an inch on the latch side and no longer catch. Throggs Neck, Pelham Bay, and City Island add coastal salt air from Long Island Sound, which accelerates surface corrosion on gate frames, hinges, and latches.
Then there’s the commercial stock. Fordham Road, Gun Hill Road, and Third Avenue are lined with storefronts running roll-down security gates. Those motors and slat assemblies get cycled twice a day, every day, sometimes with a delivery truck idling against the door track. Commercial roll-down motor replacement is one of the most common gate calls in the borough, and it’s a volume of work that surprises technicians who come from suburban residential routes. The Bronx simply has more iron per block than almost anywhere else in the city.
Our Main Bronx Services
Bronx homeowners and building managers call us most often for two things: a sagging or stuck gate that needs repair, and an electric gate or operator that has stopped responding. Each service has its own dedicated Bronx page here:
Gate Repair in Bronx
Most Bronx gate repair calls start with a gate that drags on the sidewalk or won’t latch. The cause is usually a rusted hinge, a shifted post, or a bent frame from years of freeze-thaw heaving. We reset hinge posts into masonry, rebuild corroded hinge points, and realign the gate so it swings without scraping. On row house gates where the latch has dropped out of alignment, we correct the gate’s hang rather than just moving the strike plate. See the full detail on our Gate Repair in Bronx page.
Gate Installation in Bronx
New gate installation in the Bronx almost always means setting posts in front of a pre-war brick facade or a narrow concrete walk. The job includes measuring the opening, choosing a gate that handles the grade, and anchoring posts so they won’t heave in the next freeze cycle. We handle pedestrian and driveway gates, both swing and slide. On installations we never promise same-day service; the gate is measured, built or ordered, then scheduled. Read the full scope on our Gate Installation in Bronx page.
Electric Gate Repair in Bronx
Electric gates in the Bronx have to survive road salt on exposed wiring, vibration from adjacent traffic, and heat stress on motors mounted in full sun. We service the actuator, the motorized arm that physically pushes the gate, plus control boards, safety edges, photo eyes, and keypads. If the gate is beeping but not moving, or opens halfway and reverses, the diagnostic is usually quicker than the fix. Details, including same-day dispatch for failed operators, are on our Electric Gate Repair in Bronx page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Bronx
We carry factory and aftermarket parts for the brands Bronx properties actually run: Viking, Ghost Controls, DoorKing, and Elite are the most common in the borough’s apartment and commercial stock. Our technicians arrive knowing the specific system on the property, which cuts diagnostic time and usually means most repairs are completed in a single visit. See our full our brands list for all nine gate operator systems we’re certified on.
Pricing for Gate Company in Bronx, NY
These are the ranges we quote in the borough, based on parts and labor for typical Bronx conditions. Every price is written down before any work starts, so you’ll know the number before a bolt is turned.
| Service | Typical range in Bronx |
|---|---|
| Wrought iron gate repair (hinge reset/post reset) | $300-$700 |
| Swing gate actuator swap | $450-$900 |
| Slide gate motor replacement | $600-$1,200 |
| Control board replacement | $250-$650 |
| Roll-down security gate motor replacement (commercial) | $750-$1,500 |
| Photo eye replacement | $120-$300 |
| Hinge replacement (wrought iron pedestrian gate) | $150-$400 |
| Latch and strike repair | $80-$220 |
| Full pedestrian gate installation (wrought iron, custom) | $1,200-$3,500 |
| Driveway gate installation (swing or slide) | $4,000-$12,000 |
Two things push Bronx pricing higher than a suburban quote: masonry anchoring on old brick piers takes longer and requires different fasteners than new concrete, and roll-down commercial gates on Fordham Road or Gun Hill Road often need immediate motor and track work during store hours. Every quote is written and agreed before any work begins.
Neighborhoods We Serve in Bronx
We cover the full borough with local scheduling from the New York City metro office. Typical response is same-day or next-day for electric gate failures, and within one to two business days for scheduled repair and installation estimates.
- Tremont
- Fordham
- Morris Heights
- Highbridge
- Throggs Neck
- Pelham Bay
- City Island
- Co-op City
Service Area – Cities Near Bronx
We serve the Bronx and the surrounding boroughs and municipalities where gate work follows the same urban iron profile. For gate repair in Mount Vernon, NY, we handle the same aging stock and freeze-thaw heaving. We also cover Manhattan, NY for commercial roll-down and residential courtyard gates, Yonkers, NY for older iron gates with coastal corrosion concerns, and Brooklyn, NY for row house gates and institutional perimeter work.
Serving Bronx, NY - Our Local Coverage Area
We’re based in the Bronx area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Bronx
For electric gate failures where a gate is stuck open or won’t close, we dispatch same-day in most of the borough. A stuck-open gate is a security issue, not a convenience issue. Call (940) 412-7340 and a live person answers around the clock.
Most residential gate repairs and like-for-like replacements don’t require a permit. New driveway gate installations on landmarked or multi-family properties can trigger building department review. We’ll tell you during the estimate whether your job needs approval.
Yes. We handle perimeter and vehicular gate systems at NYCHA developments including Patterson Houses, Bronxdale Houses, and Throggs Neck Houses, plus the Co-op City cooperative complex. Institutional work is quoted on-site with a written price, same as residential work.
Call (940) 412-7340 for a free estimate. A live person answers, and you’ll get a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bronx Customers Say
"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad