Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Yonkers, NY
We’re Portcullis Gate Repair, a gate company serving Yonkers, NY with a written price before any work starts and a 365-day guarantee on every repair. Yonkers is one of the few places in Westchester where a gate technician can spend the morning welding an original wrought iron stoop gate on a 1920s rowhouse and the afternoon diagnosing a grade-bound automated driveway operator in the eastern hills. That range of work, and the weather that accelerates wear on both, means the right gate company for Yonkers has to actually know the city, not just the trade. Call us at (940) 412-7340 and you’ll get a live person, not a voicemail tree.
Why Yonkers Homes Are Different
Yonkers sits on a hard boundary between a dense NYC-style urban fabric and Westchester’s suburban spread, and that split shapes the gate work here. In the west and central neighborhoods, the stock is largely pre-war attached rowhouses and multi-families, many built between 1900 and 1945, with original wrought iron pedestrian and stoop gates that are now 60 to 100 years old, pitted with rust, and anchored in brick or brownstone pillars where the mortar is failing. Those jobs are typically welding and masonry restoration, not a simple hinge swap. In the eastern and northern neighborhoods, it’s more often a post-war split-level or colonial with an ornamental aluminum or chain-link driveway gate installed in the 1970s through 2000s, and the work shifts to actuator replacement, track realignment, and operator automation.
The climate works against every gate in the city. Freeze-thaw cycling through the winter causes brick pillars to heave and crack, and a gate can’t hold alignment if its mounting post is moving. Proximity to the Hudson adds persistent humidity in the lower western elevations that feeds rust on iron gates, and the road salt spread heavily on Yonkers’s steep hillside streets corrodes hinges, latches, and frames near the curb line. Then there’s the grade itself: the elevation climb from the waterfront to the eastern highlands means many driveways sit on a noticeable slope. Automated operators installed without grade compensation drift and bind and blow limit switches, a failure mode we see constantly in Yonkers that’s far rarer in the flatter neighboring cities.
Our Main Yonkers Services
Most calls we get in Yonkers fall into two buckets: repairing an existing gate that’s sagging, seized, or off its track, and automating or replacing an older gate with something that holds up on a sloped driveway. Here’s how each works in this city.
Gate Repair in Yonkers
Gate repair in Yonkers is rarely a one-part job. Because so much of the western and central housing stock sits on brick pillars that have seen decades of freeze-thaw movement, a sagging ornamental iron gate is often a two-step fix: rebuild or reinforce the pillar, then weld and realign the gate to the corrected masonry. In the eastern neighborhoods, the work leans toward track and roller replacement, latch and hinge rebuilding on aluminum driveway gates, and frame straightening where salted water has done its work. If rusted-through sections need cutting out and new steel welded in, that’s normal for the older ironwork here. See the full scope at Gate Repair in Yonkers.
Gate Installation in Yonkers
New gate installation in Yonkers has to account for the grade from day one. On a sloped driveway, the operator, track, and hinge layout all need to compensate for the fall, or the gate will bind within months and the limit switches will fight the motor every cycle. For older city homes, a new gate installation often includes pillar work first, because a new gate hung on crumbling masonry is a guaranteed callback. We measure the opening, check the pillar condition, and give you a written price before any fabrication or install begins. For the full walkthrough, see Gate Installation in Yonkers.
Electric Gate Repair in Yonkers
Electric gate repair in Yonkers comes down to the operator and the grade it’s working against. In the eastern hills especially, we routinely find operators that were sized correctly for a flat lot but are struggling on an 8 to 12 percent slope, blowing limit switches or overheating on every cycle. The fix might be a gear replacement, a limit adjustment, or a full operator swap to something rated for the load and grade. In older ironwork, the wiring itself is often the weak point, with corroded junction boxes and failing photocells. Details are at Electric Gate Repair in Yonkers, or call (940) 412-7340.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Yonkers
Our Yonkers crews carry parts for Viking, Ghost Controls, DoorKing, and Elite operators on the truck, which means most actuator and control-board replacements happen in a single visit rather than after a parts run. We service the full nine-brand lineup and train our technicians on each system. See our brands for the complete list.
Pricing for Gate Company in Yonkers, NY
These are the ranges we quote most often in Yonkers, parts and labor together. Every price is confirmed in writing before we touch a bolt.
| Service | Typical range in Yonkers |
|---|---|
| Gate repair, welded iron restoration per section | $180 - $420 |
| Hinge replacement (iron gate, welded) | $140 - $320 per hinge |
| Post or pillar repair / rebuild | $250 - $600 per post |
| Gate realignment and adjust | $120 - $280 |
| Gate frame straightening | $200 - $450 |
| Track and roller replacement | $220 - $470 |
| Automatic gate operator replacement (swing) | $580 - $1,850 |
| Automatic gate operator replacement (slide) | $650 - $2,200 |
| Control board repair or replacement | $180 - $480 |
| Sensor / photocell replacement | $90 - $220 |
| Full gate installation (new swing gate) | $2,400 - $8,500 |
| Full gate installation (new slide gate) | $3,200 - $9,000 |
What pushes a Yonkers quote toward the higher end is almost always the pillar work: if the masonry needs rebuilding before a gate can be safely hung or realigned, that line item lands on the invoice whether it was part of the original concern or not. The counterweight is that every one of those line items is priced in writing, before any work starts, with no after-the-fact surprises.
Neighborhoods We Serve in Yonkers
We work across Yonkers, from the riverfront up into the eastern highlands. The neighborhoods below represent the spread, not the whole list, and if yours isn’t named, call and ask.
- Getty Square
- Park Hill
- Dunwoodie
- Crestwood
- Northeast Yonkers
Most repair calls in the city fall within a one-day window, with the next day typical for the eastern hill neighborhoods. Emergency calls move faster; call (940) 412-7340 and a live person will confirm availability.
Service Area – Cities Near Yonkers
Beyond Yonkers, we serve the neighboring communities with the same written price and 365-day guarantee: Mount Vernon, NY, New Rochelle, NY, White Plains, NY, and the Bronx, NY. Dispatch and scheduling are coordinated from the brand’s New York City office, and our crews serve Yonkers locally.
Serving Yonkers, NY - Our Local Coverage Area
We’re based in the Yonkers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Yonkers
Most non-emergency repair calls get scheduled within one business day, with a real arrival window given when you book. For a gate that won’t close or a security issue, same-day dispatch is often available. Call (940) 412-7340 and a live person will tell you the soonest window, not a recorded menu.
It depends. Many gate repairs and replacements on existing posts don’t require a permit, but any substantial masonry work, a new driveway gate with automation, or changes to street-facing fencing may. We can walk through the specifics for your property on the phone and tell you what’s typical in your part of Yonkers before any work is scheduled.
We cover the full city, from the southwest rowhouse blocks up through the eastern and northern subdivisions. The terrain and housing mix change from one neighborhood to the next, and our Yonkers crews are stocked and equipped for both the iron restoration work in the west and the automated operator work in the east.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Yonkers Customers Say
"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva