Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in White Plains, NY
Gate repair in White Plains means working around condominium boards, shared electrical panels, and seasonal frost heave. Most of the automated gates in this city sit on 1970s and 1980s townhouse and condo complexes off Mamaroneck Avenue and near City Center, and many still run their original operator. Those systems are now 35 to 45 years old, and the freeze-thaw cycles here push concrete post footings around every winter. If you need a gate company in White Plains that shows up with a written price and a real arrival window, call us at (940) 412-7340.
Why White Plains Homes Are Different
White Plains has two distinct housing stocks, and they fail in different ways. The dense condo and co-op corridors along Mamaroneck Avenue and around City Center were built during the 1970s through 1990s suburban boom, and a lot of those complexes still have their original automated gate operators. Those units are now well past their service life, and they were often wired into common electrical panels shared with exterior lighting. That means what starts as a hinge-and-operator call can turn into a building-wide circuit conversation with the property manager and an electrician. The older single-family neighborhoods near Battle Hill and Gedney are a different animal: mid-century brick colonials and Tudors with ornamental wrought-iron or aluminum swing gates set on masonry or poured-concrete footings. Those gates tend to fail from corrosion and seasonal movement rather than age alone.
Westchester County’s freeze-thaw pattern is the recurring culprit. White Plains averages more than 25 inches of snow a year, and temperatures swing across 32 degrees repeatedly through late winter and early spring. Concrete footings heave, gate frames shift out of square, and the operator has to work harder every cycle until something gives. Road salt spray from the city’s dense street grid accelerates rust on iron and steel hardware faster than what you’d see on quieter suburban lanes. And before any repair happens on a condo gate, there’s usually an HOA approval chain and a Westchester County permit conversation to work through. That’s a layer single-owner homes in neighboring villages rarely deal with, and it changes how the job gets planned.
Our Main White Plains Services
Most White Plains calls fall into three buckets, and each has its own dedicated page with local pricing and specifics.
Gate Repair in White Plains
Repair work here usually means bringing a sagging or seized gate back into square, replacing worn hinges, or swapping out an operator that no longer responds. On condo properties, we coordinate with the property manager and, where needed, the building’s electrician before turning a bolt. On the older estate-style gates near Battle Hill and Gedney, we’re often correcting years of freeze-thaw drift and salt corrosion. Dean Prescott oversees every repair, and the Kingswell Guarantee applies in full: a written price before work starts and a written guarantee on the fix. Gate Repair in White Plains
Gate Installation in White Plains
A new gate in White Plains has to be planned around what’s already in the ground: undersized footings from the 1970s, buried conduit that may not meet current code, and HOA design standards that vary building to building. We measure, quote a written price, and schedule the work so the property isn’t left unsecured overnight. For estate homes around Gedney, we often reinforce post footings to handle Westchester’s freeze-thaw cycles from day one rather than three winters later. Gate Installation in White Plains
Electric Gate Repair in White Plains
Electric gate repair in White Plains frequently starts with a control board fault or a safety sensor that’s been knocked out of alignment. On condo corridors, the original 1980s operators were commonly wired into shared lighting circuits, which complicates any electrical diagnosis. We carry control boards, sensors, and receiver parts for the major brands, so most electric gate calls get diagnosed in one visit. Every repair includes a written Kingswell Guarantee and the 365-Day Done Right Promise. Electric Gate Repair in White Plains
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in White Plains
We carry parts and control boards for Linear, Viking, Ghost Controls, and DoorKing systems, and our technicians arrive already knowing those operators rather than learning on your driveway. Parts are stocked regionally, so most White Plains repairs happen in one visit. See our brands for the full operator list.
Pricing for Gate Company in White Plains, NY
| Service | Typical range in White Plains |
|---|---|
| Hinge replacement (single swing gate) | $180-$340 |
| Swing gate actuator swap | $450-$900 |
| Slide gate chain replacement | $220-$400 |
| Control board replacement | $400-$900 |
| Safety sensor replacement (pair) | $150-$300 |
| Track repair for slide gates | $200-$450 |
| Post realignment and re-securing | $250-$500 |
| Keypad or intercom replacement | $200-$500 |
| Full slide gate operator replacement | $1,800-$3,200 |
| Wrought-iron gate fabrication (custom) | $2,500-$7,000 |
What pushes White Plains prices up is access and coordination: condo boards needing written approvals, permit pull requirements, and gates wired into shared panels all add planning time before the work itself begins. Heavily corroded estate gates near Gedney may also need additional steel reinforcement rather than a simple part swap. On every job, the price is written and agreed before a single bolt is turned, no exceptions.
Neighborhoods We Serve in White Plains
We cover the full city, from the condo corridors near City Center and Mamaroneck Avenue to the older neighborhoods around Battle Hill, Gedney, and the surrounding blocks. Our dispatch and scheduling are coordinated from the brand’s New York City office, with crews serving White Plains locally.
- City Center and Mamaroneck Avenue corridor
- Battle Hill
- Gedney
- North White Plains
- Highlands and Rosedale
Most White Plains calls get a technician on site within one business day, and repair emergencies are handled on the same day when they come in before early afternoon.
Service Area – Cities Near White Plains
We work throughout Westchester County and the surrounding area. If you’re just outside the city line, we also serve Yonkers, NY, New Rochelle, NY, Mount Vernon, NY, and Bronx, NY, with the same written price and written guarantee on every job.
Serving White Plains, NY - Our Local Coverage Area
We’re based in the White Plains area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in White Plains
We schedule most White Plains calls within one business day. Repair emergencies that come in before early afternoon are typically handled the same day. You get a real arrival window, not a four-hour guess, and a live person answers the phone 24 hours a day, including weekends and holidays. Call (940) 412-7340 and we’ll give you a straight answer on timing.
We coordinate with property managers and building boards on condo and co-op gate work, including the Westchester County permit requirements that apply to structural changes. You’ll know what’s needed and who’s responsible for what before work begins. We don’t start on a condo gate until the approvals are in hand.
Most repairs in White Plains run $180 to $500 for hinge, sensor, and track work, and $450 to $900 for actuator or control board replacements. A full operator replacement is generally $1,800 to $3,200. The price is quoted in writing before any work starts. Call (940) 412-7340 for an exact quote on your gate; estimates are free.
If your gate in White Plains isn’t opening, closing, or latching the way it should, call Portcullis Gate Repair at (940) 412-7340 for a free estimate. You’ll get a written price before any work begins and a written Kingswell Guarantee on the repair. That’s the way Dean Prescott and the whole Kingswell company work: no surprises, no no-shows, and a 365-Day Done Right Promise on every fix.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What White Plains Customers Say
"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad