Gate Repair Cost in Arlington - Real Local Prices, Then a Free Site Survey

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

How Much Does Gate Repair Cost in Arlington?

Gate repair in Arlington typically runs $150 to $650, with most residential jobs landing between $220 and $400. A simple fix like a misaligned latch or a new remote often comes in under $200, while a failed actuator or a bent cantilever arm pushes toward the higher end. Commercial slide gates and operators can run $500 to $2,500 depending on the drive system and the parts on hand.

If you’ve been burned before by a quote that doubled at the door, the number that matters most is the one in writing before anyone touches the gate. That’s what we do at Portcullis. Every repair starts with a written price, and the Kingswell Guarantee backs it for 365 days.

Gate Repair Cost Breakdown (2026)

Here’s what Arlington homeowners and commercial property managers are paying this year compared to how much gate repair costs in Dallas, TX. These are real ranges for parts and labor, not a national average pulled off a blog.

What drives a repair to the top of a range? Brand and age of the operator matter most. We work on nine major gate-operator brands - LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule - and parts availability varies by brand. Older FAAC and DoorKing systems sometimes need a controller swap when only one component failed, which adds labor. Gate weight and post condition also change the math. A 200-pound iron gate needs two techs to safely reposition; a lightweight aluminum gate doesn’t.

We also factor in access. A gate tucked behind a long driveway in Arlington’s Interlochen neighborhood takes longer to reach with a truck and gear than one on a corner lot off Cooper Street. That’s real time, and we price it honestly instead of padding the invoice later.

What Affects Gate Repair Pricing in Arlington

• Gate type and weight. A single swing gate, a double swing gate, and a cantilever slide gate each need different hardware and different labor. Heavier gates need more than one technician on site.
• Operator brand and age. A 15-year-old Linear operator may be discontinued, and finding a compatible board takes a phone call or two. Newer LiftMaster and Ghost Controls systems usually have parts in the truck.
• Whether it’s an electrical or mechanical failure. A dead motor or blown control board costs more to diagnose and fix than a binding hinge or a worn roller.
• Post and footing condition. North Texas clay soil shifts with wet and dry cycles. When a post has heaved, the repair isn’t just the hinge - the gate has to be re-hung, and sometimes the footing needs attention.
• Safety and code compliance. Automated gates in Arlington need functioning safety sensors, and commercial properties with pedestrian access often fall under additional requirements. Bringing a gate up to code adds cost but keeps you out of trouble.
• After-hours or weekend service. If a gate is stuck open on a Friday night and the property isn’t secure, we answer the phone and can schedule a visit. Emergency timing affects labor rates.

One more factor that surprises people: the same repair costs different amounts at different gate companies because of what isn’t on the invoice. A lowball quote often means a generic part, a technician who isn’t background-checked, and no written warranty. We come in uniform, we’re background-checked, and every repair carries the 365-Day Done Right Promise in writing.

How We Price a Gate Repair Before We Start

1. You call and reach a live person. No voicemail tree. A real person answers 24 hours a day, 7 days a week, including holidays.
2. We ask the right questions up front. Gate type, operator brand, what it’s doing or not doing. That tells us what parts to bring.
3. We give you a real arrival window. Not “sometime Tuesday.” A window you can plan your day around, part of The Kingswell Way.
4. On site, we diagnose before we quote. We test the operator, check the sensors, inspect the posts and hinges, and confirm what’s actually failing.
5. You get the price in writing before any bolt is turned. If it changes, it only changes because you approve the change first.
6. We do the repair, clean the site, and hand you a guaranteed invoice. The guarantee is 365 days, and if the same repair fails inside that window, we come back at no charge.

How to Save on Gate Repair

Get the estimate in writing and compare the scope, not just the number. A $180 quote that doesn’t include the sensor realignment you actually need isn’t cheaper - it’s incomplete. Ask what parts are being used and whether the repair is covered afterward.

Address small problems before they cascade. A gate that drags because of a worn roller will eventually stress the actuator, and now you’re paying for both. A five-minute adjustment today can save a $900 actuator swap next spring.

Don’t lubricate a sticking gate with the wrong product. Grease on a roller track attracts grit and makes things worse. Ask us what your specific gate and operator need, and we’ll tell you straight.

Bundle work when it makes sense. If your hinges are worn and your remote range has been fading, one visit covers both and you save the trip charge. Free estimates are free - call (940) 412-7340 and we’ll talk through what you’re seeing before anyone shows up.

FAQs - Gate Repair Cost

How much does it cost to fix a gate that won’t close in Arlington?

Most won’t-close calls in Arlington run $150 to $400. The cause is usually a misaligned latch, a blocked or dirty safety sensor, or a limit switch that drifted. Diagnosis takes a few minutes on site, and we tell you the price in writing before we start. Call (940) 412-7340 for an exact quote - estimates are free.

Is it cheaper to repair a gate operator or replace it?

Repair is almost always cheaper in the short run: $280 to $700 for board or component work versus $1,400 to $3,200 for a full operator replacement. Replacement makes sense when the unit is 12-plus years old and discontinued, or when the motor and board are both failing. We’ll give you both numbers so you can decide. Call (940) 412-7340 and we’ll walk through your options.

Do you charge a service call fee?

We quote the full repair, parts and labor together, so there’s no surprise line item tacked on after the fact. You get one written price before work begins. If you want a number before anyone rolls a truck, call (940) 412-7340 and we’ll give you a realistic range over the phone.

Can you repair my gate the same day?

Often, yes, especially for common failures on the nine brands we service: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we stock parts for those systems, many repairs finish in a single visit. Call (940) 412-7340 and we’ll give you a real arrival window.

What does the 365-Day Done Right Promise actually cover?

It covers the repair we performed for a full 365 days. If it fails within that period, we come back and fix it at no charge, with no argument and no trip fee. The guarantee is printed on your invoice with the date. That written commitment is what a failed repair should cost you: nothing. Call (940) 412-7340 to schedule.

Why Arlington Homeowners Call Portcullis

Portcullis Gate Repair has operated as a Kingswell company since 2008, and every location is independently owned and operated but held to the identical Kingswell Guarantee. That means a written price, a real arrival window, a clean job site, and a written guarantee on every repair. Our technicians are background-checked and arrive in uniform, so you know who’s at the gate before they knock. We’ve been servicing the homeowners and property managers of Arlington long enough to know this market, and we’d rather earn the next call than overcharge for this one. If you want to see how a repair should go, start at our home page.

For gate repair in Arlington and the surrounding neighborhoods, call (940) 412-7340. A live person answers 24/7, estimates are free, and every job comes with a written price before we start.

Pricing reflects the Arlington market as of 2026. Portcullis Gate Repair offers free gate repair estimates in Austin, TX - call (940) 412-7340. Written by Dean Prescott, Owner at Portcullis Gate Repair.