Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Hornsby Bend, TX
Gate repair in Hornsby Bend, TX carries a different set of problems than the subdivisions west of Austin. This is river-bottom country: rural acreages, long unpaved driveways, and gates that were built for livestock decades ago, then retrofitted with automation as the eastward sprawl reached the Colorado’s east bank. When the river rises or the clay soil heaves, the gates here fail in ways that a technician working the Hill Country rarely sees. We work on those failures every week, and we quote the price before we touch a single bolt. Call (940) 412-7340 when a gate in Hornsby Bend stops cooperating.
Why Hornsby Bend Homes Are Different
Most of Hornsby Bend sits inside the Colorado River floodplain, and that one fact shapes nearly every gate repair we do here. When the river runs high, low-lying properties take on water, and the damage travels straight to the gate: hinges pulled from posts, track systems packed with silt, opener circuit boards drowned before their time. It is a flood-recovery repair cycle, not a wear-and-tear cycle, and it makes Hornsby Bend work distinct from what we see in surrounding Austin suburbs.
The soil adds a second layer of trouble. This stretch of Travis County is underlain by Vertisol clay, which swells when wet and shrinks and cracks when dry. Gate posts in Hornsby Bend heave and go out of plumb with the seasons, sometimes twice a year. A gate that swings fine in March can bind and drag by July. Summer heat and UV do not help: triple-digit days bake the rubber seals and plastic internals of automatic openers, shortening their life. Then there is the housing stock itself, much of it older ranch property with wooden or tubular-steel swing gates and cattle-style hardware built for function, not smooth operation. When an automated opener gets bolted onto that old frame, the two do not always agree.
Our Main Hornsby Bend Services
Hornsby Bend homeowners call us most often about two things: a gate that has stopped opening, and a gate that was never automated in the first place and now needs to be. Each service has its own Hornsby Bend page with the full detail.
Gate Repair in Hornsby Bend
Most repair calls here start the same way: the gate will not budge, or it groans and moves six inches before stopping. On a Hornsby Bend property the cause is often river-related, a mud-packed roller or a corroded wire run from the last high-water event, or a post that has leaned out of plumb in the shifting clay. We diagnose the specific failure, write the price, and then do the work. Swing-gate hinge and post resets, track cleanup on slide gates, operator troubleshooting: this is the everyday work. Full details, including what a typical Hornsby Bend repair costs, are on the Gate Repair in Hornsby Bend page.
Gate Installation in Hornsby Bend
Installation here is less about swapping one suburban gate for another and more about building for the floodplain. Long unpaved driveways, wide entrances sized for trailers and stock, soil that moves with every wet-dry cycle: the new gate has to account for all of it. We measure, recommend the right operator for the site, and install with the understanding that the ground under it will not sit still. Every installation comes with a written price before the first day of work and a written guarantee after the last. See Gate Installation in Hornsby Bend for the full scope.
Electric Gate Repair in Hornsby Bend
When an automated gate in Hornsby Bend fails right after a storm or a river rise, the problem usually lives in the electrics: a control board that got wet, a photo-eye knocked out of alignment by debris, a keypad that will not wake up. We service the operator brands common across these properties, and we check the power run and safety edges as part of the diagnosis. If the operator cannot be saved, we say so plainly and give a replacement price before ordering anything. The Electric Gate Repair in Hornsby Bend page covers operator diagnosis and replacement in detail.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Hornsby Bend
Most automated gates in Hornsby Bend run on one of a handful of operator brands, and we keep parts for the common ones on the truck: Linear, Viking, Ghost Controls, and DoorKing all show up regularly out here. Because the tech arriving already knows the operator on the property, most repairs finish in a single visit. See our brands for the full list of what we service.
Pricing for Gate Company in Hornsby Bend, TX
| Service | Typical range in Hornsby Bend |
|---|---|
| Service call / diagnostic visit | $75 - $125 |
| Standard service call (labor and check, price credited to repair) | $95 - $150 |
| Tube-steel swing gate fabrication | $950 - $1,800 |
| Automated driveway gate, complete with operator | $4,500 - $12,000 |
| Gate opener / actuator replacement | $600 - $1,400 |
| Control board replacement | $300 - $650 |
| Loop detector replacement | $550 - $1,400 |
| Photo-eye sensor replacement | $185 - $400 |
| Electric strike / maglock replacement | $850 - $1,900 |
| Full track and wheel rebuild on a heavy slide gate | $900 - $1,600 |
| Batch of small fixes in one visit (hinge, latch, keypad, sensor) | $300 - $700 |
| Wood gate reframe and rehang | $420 - $950 |
River-bottom conditions push prices up in two specific ways here: flood-damaged electronics and soil-shifted posts. A control board that has been underwater is usually a replacement, not a repair, and a post that has heaved in Vertisol clay needs excavating, re-setting, and bracing, not just a turn of a wrench. Every quote is written before any work starts, and the price you see is the price on the invoice.
Neighborhoods We Serve in Hornsby Bend
We run calls across all of Hornsby Bend, from the riverfront parcels to the newer large-lot developments going in on the east side. Most appointments are scheduled within a day or two, and emergency calls are handled around the clock.
- Hornsby Bend riverfront acreages
- Old Lockhart Road corridor
- Webberville Road ranch parcels
- Colorado River bottomland properties
- Eastern large-lot subdivisions
Service Area – Cities Near Hornsby Bend
Our Hornsby Bend crews also cover the surrounding metro. If your property is across the county line or just down the road, you can reach us through the same number. We also serve Houston, TX, San Antonio, FL, Dallas, TX, and Fort Worth, TX for gate work in those areas.
Serving Hornsby Bend, TX - Our Local Coverage Area
We’re based in the Hornsby Bend area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hornsby Bend
Most non-emergency calls in Hornsby Bend are scheduled within one to two days. For a gate stuck open or closed, which is a real security issue on an acreage, we run emergency dispatch around the clock. Call (940) 412-7340 and a live person answers, day or night.
Most gate repairs and replacements on existing posts do not require a permit in Travis County, but new automated installations with electrical runs may. We check the current county requirements before starting any install, and we handle the paperwork if a permit is needed.
Yes. Our trucks handle the long unpaved driveways and ranch entrances that make up most of Hornsby Bend. If a gate sits at the end of a half-mile dirt drive, that is normal for us, not an exception.
If a gate in Hornsby Bend is giving you trouble, call (940) 412-7340. We will answer, give you a real arrival window, and put the price in writing before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hornsby Bend Customers Say
"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva