Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Angleton, TX
Portcullis Gate Repair handles residential and commercial gate work across Angleton, TX, from simple latch replacements to full electric-operator rebuilds after a flood event. Angleton’s mix of town-lot homes near the courthouse square and sprawling ranch-style properties on Brazoria County acreage means gates here run heavier, wider, and harder than what you’d find in a typical Houston suburb. The persistent Gulf Coast humidity and clay-heavy soils also mean alignment and corrosion issues show up here far more often than in drier parts of Texas. If your gate won’t open, sags on its hinges, or keeps shorting out after rain, call (940) 412-7340 and we’ll give you a written price before any work starts.
Why Angleton Homes Are Different
Angleton sits in the flood-prone Brazoria County bottomlands, where tropical storm events and Brazos River basin flooding routinely submerge gate motors, control boards, and wiring, sometimes for days at a time. After Hurricane Harvey in 2017, a lot of operators were hastily replaced but reinstalled at the same low elevations. We regularly see that flood-rebuilt work failing again, with control boxes corroded from the next high-water event. Relocating electrical components above realistic flood stage has become a near-standard step in most Angleton repair calls.
The ranch and agricultural character of the area also shapes the work. A high share of service calls involve heavy-duty farm and cattle gate hardware rather than standard residential operators. Clay-heavy expansive soils cause gate posts to heave, settle, and lean out of plumb seasonally, throwing automatic gates out of alignment far more frequently than in drier regions. And saltwater-laden air from Gulf storm systems accelerates rust on hinges, latch hardware, and untreated steel frames even this far inland. The technician who shows up here needs to understand both flood recovery and farm-gate hardware, not just residential openers.
Our Main Angleton Services
The two jobs Angleton homeowners call us about most are gate repairs that follow a storm or a mechanical failure, and full installations or replacements built to handle Brazoria County conditions. Dean Prescott and our technicians work on all three service lines across Angleton.
Gate Repair in Angleton
Gate Repair in Angleton covers everything from sagging hinges and leaning posts to broken latches and seized wheels on both automatic and manual gates. On clay-heavy Angleton lots, post movement is the usual culprit behind a gate that suddenly won’t close square. We address the post, the hardware, and the alignment together so the fix holds through the next wet-dry soil cycle. Every repair carries the 365-Day Done Right Promise in writing.
Gate Installation in Angleton
Gate Installation in Angleton starts with what the gate actually needs to do: keep cattle in on a ranch parcel, secure a driveway on a residential lot, or handle commercial traffic. We size the frame, hinges, and operator for the gate’s weight and width, and in Angleton we elevate electrical components above flood stage as standard practice. You get a written, itemized price before any material is ordered or any post is set.
Electric Gate Repair in Angleton
Electric Gate Repair in Angleton addresses failed operators, corroded control boards, damaged photo-eye wiring, and remote systems that have stopped responding. In Angleton, water intrusion is the recurring theme, whether from floodwater, humidity, or a control box mounted too close to grade. We diagnose the board or actuator, present you the price in writing, and make the repair the same visit when parts are on the truck.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Pricing for Gate Company in Angleton, TX
| Service | Typical range in Angleton |
|---|---|
| Swing gate actuator swap | $480-$900 parts and labor |
| Control board replacement | $320-$750 parts and labor |
| Hinge replacement (per pair, heavy gate) | $180-$420 |
| Gate post reset / reinforcement | $350-$800 |
| Track and roller replacement (slide gates) | $275-$600 |
| Remote / keypad programming | $75-$160 |
| Full service call with diagnostic | $95-$185 |
| Complete residential gate installation | $2,800-$7,500 |
What pushes a price up in Angleton is usually water damage that has spread beyond one component, a post that needs excavation and re-setting in clay soil, or a gate that was installed too low and needs its electrical work elevated. Whatever the job, the price is quoted and agreed in writing before any work begins, and it doesn’t change at the end.
Brands We Service in Angleton
We work on FAAC, BFT, Linear, and Viking operators, along with five other major brands. Because Angleton’s flood-recovery pattern means certain control boards and actuators fail in clusters after big storms, we keep the most common parts for these systems stocked on the truck. For Angleton-specific brand support, see our brands.
Neighborhoods We Serve in Angleton
We serve the entire Angleton area, from the older town lots near the historic courthouse square to the ranch-style parcels on the outskirts where properties open onto county roads rather than cul-de-sacs. Response for most Angleton calls lands within a single business day, with emergency service available around the clock.
- Downtown Angleton and the courthouse square area
- Angleton Townsite neighborhoods
- Henderson Road and North Angleton corridor
- Brazoria County Road 44 / Ranch Road acreage
- Southern Angleton toward the Brazos River
Service Area – Cities Near Angleton
Our Angleton crews also cover the surrounding Brazoria County communities. If you’re in Lake Jackson, TX, Clute, TX, Freeport, TX, or Alvin, TX, the same written-price standard applies. Dispatch and scheduling are coordinated from the brand’s Dallas-Fort Worth office, and crews serve Angleton locally.
Serving Angleton, TX - Our Local Coverage Area
We’re based in the Angleton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Angleton
Most Angleton calls are answered within one business day. For a gate stuck open with livestock inside, or a driveway gate that won’t close at night, we treat it as an emergency and respond around the clock. Call (940) 412-7340 and a live person picks up.
For most repair and like-for-like replacement work, no permit is required within Angleton city limits, but new installations on certain road frontages can trigger a review. We’ll tell you honestly if your specific job needs one before anything is scheduled or quoted.
Yes. A cattle gate on a Brazoria County parcel and a residential driveway gate on a town lot are both standard calls for us. The hardware, the post work, and the operator are just chosen for the gate’s actual weight and use, not a one-size-fits-all kit.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Angleton Customers Say
"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti