Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Coppell, TX
Coppell homeowners call us when a driveway gate starts leaning, grinding, or refusing to open at all. Most of the gates we work on here were installed during the 1990s and early 2000s building boom, which means their operators, hinges, and posts are now aging out at roughly the same time. What makes Coppell different from neighboring cities is the combination of HOA architectural standards and North Texas clay soil, both of which turn a simple gate repair into something that requires local knowledge. Call (940) 412-7340 and you’ll get a live person, not a voicemail tree.
Why Coppell Homes Are Different
Coppell’s housing stock is overwhelmingly upscale single-family homes built by a handful of large DFW developers during the 1990s and early 2000s. Those developers specified ornamental iron automatic driveway gates as standard upgrades in many subdivisions, and they often used the same gate operator brand across an entire neighborhood. The result is that Coppell has clusters of homes with nearly identical aging gate hardware. A technician who knows which brand was spec’d in a given subdivision can often diagnose the problem before they even arrive, because they’ve seen the same failure on the same equipment four streets over.
Then there’s the soil. Coppell sits on the expansive black gumbo clay that runs through North Texas. After heavy spring rain, that clay swells and pushes gate posts upward. During summer drought, it shrinks and the posts settle or lean. Gate misalignment from post movement is one of the most common service calls we get in Coppell, and it’s a problem that simply doesn’t exist to the same degree in cities with sandier soil. Add in the straight-line winds that arrive with spring storms, and you have iron gate frames that get bent or operators knocked off their mounts. These are fixable problems, but they require someone who understands how the ground moves under the gate, not just how the operator works.
Our Main Coppell Services
The two calls we take most often in Coppell are for gates that won’t open and gates that need to be replaced entirely. Each service has its own detailed Coppell page below.
Gate Repair in Coppell
Most repair calls in Coppell are gates that have stopped mid-travel, started making a grinding noise, or sagged so badly they drag on the driveway. The fix often involves the actuator, the motorized arm that physically pushes or pulls the gate open, or the hinges that carry the gate’s full weight. With Coppell’s clay soil shifting posts seasonally, we check alignment on every repair, not just the part that failed. See Gate Repair in Coppell for what a typical repair includes and what it costs.
Gate Installation in Coppell
New gate installation in Coppell means more than setting posts and hanging a leaf. It means checking the existing post footings, accounting for soil movement with proper depth and concrete, and matching the gate’s look to the subdivision’s HOA architectural guidelines. We measure, quote a written price, and schedule the work; this is not a same-day job. See Gate Installation in Coppell for how we handle HOA compliance and what a new gate typically costs.
Electric Gate Repair in Coppell
When a gate has an operator, a keypad, a loop detector, or safety edges and something stops working, that’s electric gate repair. The most common Coppell call is an operator that hums but doesn’t move the gate, which usually points to a capacitor, a control board, or a limit switch. We carry parts on the truck for the brands most common in Coppell subdivisions, which speeds up the repair considerably. See Electric Gate Repair in Coppell for the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Coppell
We regularly service FAAC, BFT, Linear, and Viking operators in Coppell. Because several Coppell subdivisions were built with Viking Access Systems or Elite operators specified across entire streets, we stock the most common control boards, capacitors, and limit switches for these brands on our trucks, which means many repairs are completed on the first visit. See our brands for the full list.
Pricing for Gate Company in Coppell, TX
| Service | Typical range in Coppell |
|---|---|
| Swing gate actuator replacement | $680 - $1,240 parts and labor |
| Slide gate operator replacement | $840 - $1,590 parts and labor |
| Control board replacement | $230 - $475 |
| Gate hinge replacement (set) | $180 - $340 |
| Gate post reset / re-set in concrete | $350 - $700 per post |
| Operator arm replacement | $260 - $430 |
| Safety sensor or photo eye replacement | $120 - $260 |
| Keypad or intercom replacement | $180 - $420 |
| Full ornamental iron driveway gate installation | $3,200 - $7,800 |
| Electric gate opener system installation | $2,400 - $4,800 |
What pushes a Coppell gate price to the higher end of these ranges is usually post movement. If the clay soil has heaved a post out of plumb, the gate has to come off, the post has to be reset in fresh concrete, and the gate has to be re-hung before the operator can be reinstalled. That’s more labor than a simple part swap, and it’s common enough in Coppell that we mention it upfront rather than discovering it after the fact. Every price we quote is written down before any work starts, and that’s the price you pay.
Neighborhoods We Serve in Coppell
We work throughout Coppell, including the master-planned subdivisions along Denton Tap Road, Sandy Lake Road, and Belt Line Road. Our technicians know which gate brands were spec’d in which communities, which saves time on diagnosis.
- Northlake Woodlands
- Valley Ranch
- Mockingbird Meadows
- Village at Coppell
- Andrews Crossing
Service Area – Cities Near Coppell
Our Coppell crews also serve nearby DFW suburbs. If you’re in Lewisville, TX, Carrollton, TX, Grapevine, TX, or Addison, TX, we can schedule a visit from the same team. Scheduling is coordinated from our Dallas-Fort Worth office, and the technician who arrives at your gate knows Coppell’s hardware and soil conditions.
Serving Coppell, TX - Our Local Coverage Area
We’re based in the Coppell area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Coppell
Most Coppell repair calls are scheduled the same day or next day. We answer the phone 24 hours a day, so you’ll speak to a live person when you call (940) 412-7340, and we’ll give you a real arrival window before we dispatch a technician.
We know the Coppell HOA architectural review process and we’ll provide the material specifications and finish details your HOA needs to review. The written quote we give you before any work starts includes every detail your HOA will ask about. You handle the submission; we make sure the paperwork is right.
Yes. Coppell’s black gumbo clay swells after rain and shrinks in drought, which can push posts out of alignment. We check post plumb on every repair, and if the post has moved, we’ll include resetting it in the same written quote rather than discovering it mid-job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Coppell Customers Say
"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva"The opener gave out and we were manually pushing the gate for a week. Portcullis got us in quick, swapped the opener, and set up the remotes for both our cars. Great to have it working again."
- Priscilla Nava