Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Grapevine, TX
Gate work in Grapevine doesn’t look like gate work in most Texas suburbs. We see two very different worlds here: 1990s and early-2000s master-planned subdivisions full of ornamental iron driveway gates now hitting their 20-to-25-year mechanical lifespan, and the airport-adjacent commercial corridor along SH-114 and SH-121 where slide-gate operators cycle through thousands of open/close operations daily. Black clay soil shifts posts out of square. Hundred-degree summers cook motors. If your gate won’t open, sags on its hinges, or grinds when it moves, call (940) 412-7340 and we’ll give you a written price before any work starts.
Why Grapevine Homes Are Different
Grapevine sits on expansive black clay soil that heaves with every wet-dry cycle. When that soil moves, gate posts lean, frames rack out of square, and a gate that latched cleanly in April scrapes the striker by August. That’s a structural issue, not just a hinge adjustment, and it’s the single most common failure mode we correct on Grapevine driveways.
The housing stock adds another layer. Most of Grapevine’s residential gates were installed during the 1990s and early 2000s building boom. Those swing and slide operators, the motorized units that physically move the gate, are now reaching the end of their service life at roughly the same time across town. Wrought-iron gates from that era are well built, but their operators die on a predictable schedule. We replace far more actuators and control boards in Grapevine than we do in neighboring cities simply because of where the town sits in that replacement cycle.
Grapevine’s position on the north side of DFW International Airport also shapes the work. Hotels, corporate campuses, car rental lots, and parking facilities along International Parkway run commercial slide gates that cycle thousands of times a day. Those wear out in three to five years. We service that wear-heavy segment alongside residential driveways, which means our Grapevine crews see every failure pattern the trade produces.
Our Main Grapevine Services
Most Grapevine homeowners call us for one of three things: a gate that stopped moving, a gate that needs replacing, or an electric gate system that’s acting up. Each has its own page with Grapevine-specific pricing and details.
Gate Repair in Grapevine
A sagging gate or a stuck operator is rarely a single problem. The black clay under the posts has usually shifted something, the hinges have worn around the misalignment, and the operator has been fighting the added drag for months before it quit. Our repair work starts with the structure: re-plumbing posts, re-racking the frame, checking every hinge and weld point. Then we address the mechanical side. For Grapevine’s aging iron gates, structural correction before mechanical repair is the difference between a fix that lasts and one that fails in six weeks. Read more on our Gate Repair in Grapevine page.
Gate Installation in Grapevine
New gate work in Grapevine has to account for that same expanding clay. We set posts deeper than the minimum and use concrete collars sized for the soil’s movement, not just the gate’s weight. Most installations we do here are ornamental iron driveway gates, some are replacement operators on existing gates, and a smaller share are custom wood gates near the historic Main Street core. Every installation starts with a site walk and a written quote, so you’ll know the full number before any material is ordered. Details and pricing are on our Gate Installation in Grapevine page.
Electric Gate Repair in Grapevine
Grapevine’s heat is hard on electric gate systems. Motors overheat, capacitors swell, control boards crack solder joints, and photocell sensors drift out of alignment. We dispatch technicians who already know the operator on your property, whether it’s a FAAC, Linear, Viking, or another major brand. The fix often comes down to a specific board or actuator swap, which we quote in writing before touching a single wire. Full pricing breakdowns and troubleshooting detail are on our Electric Gate Repair in Grapevine page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Grapevine
Our Grapevine trucks stock parts for the brands we see most on local properties: FAAC swing actuators, BFT and Linear operators, and Viking slide systems. That local stocking means many repairs are completed same-visit rather than waiting on a shipped part. See our brands for the full service list.
Pricing for Gate Company in Grapevine, TX
| Service | Typical range in Grapevine |
|---|---|
| Service call / diagnostic visit | $75 – $125 |
| Gate hinge replacement (pair) | $150 – $350 |
| Gate post re-set / re-plumb | $300 – $700 |
| Swing gate actuator replacement | $550 – $1,100 |
| Slide gate operator replacement | $800 – $1,600 |
| Control board replacement | $250 – $650 |
| Photocell sensor replacement | $120 – $250 |
| Keypad / intercom replacement | $200 – $500 |
| Gate wheel / roller replacement | $100 – $250 |
| Full iron driveway gate install (single swing) | $2,500 – $6,000 |
What pushes a Grapevine quote toward the top of a range is usually structural: posts that need re-setting in shifting clay, frames that have to be re-racked before new hardware goes on. Commercial slide gates along the airport corridor also run higher because of duty cycle and access scheduling. Whatever the number, you’ll get it in writing before any work begins, and the Kingswell Guarantee covers the repair in writing for 365 days.
Neighborhoods We Serve in Grapevine
We run calls across all of Grapevine, from the master-planned subdivisions on the north and east sides to the older streets around Main Street. If you’re inside city limits, we can usually get a technician to you the same day for a repair; installation visits are scheduled after a free site measure.
- Timberline
- Pecan Hollow
- Silver Lake Estates
- Central Grapevine near Main Street
- Thousand Oaks
Service Area – Cities Near Grapevine
Our Grapevine crews run the same written-price, written-guarantee standard in the neighboring communities. If your property sits near a Grapevine line, you may be in our dispatch area for Southlake, TX, Colleyville, TX, Euless, TX, or Coppell, TX. Call and we’ll confirm coverage.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Grapevine
Yes. Many Grapevine subdivisions have architectural review standards for replacement gates and community entrances. We work with HOA spec sheets routinely and can provide the documentation your board or management company asks for before installation. We’ll match the specified iron style, finish, and operator type, and quote the job in writing before ordering anything.
For gate repairs, we typically dispatch same-day when you call before early afternoon. Emergency calls, like a gate stuck open or a vehicle trapped in the driveway, get priority. Installation visits run on a scheduled basis after a free measure. Call (940) 412-7340 and a live person will give you a real arrival window, not an automated message.
Only if it’s installed for average soil instead of this soil. We set posts on deeper concrete collars and verify plumb at both wet and dry points in the season. That’s the standard approach for Grapevine’s expansive clay, and it’s built into every installation estimate we write. The written quote always includes this soil-specific post work, so there are no surprises at install time.
If your gate needs work in Grapevine, call (940) 412-7340. We’ll give you a written price before any work starts, a real arrival window, and a written guarantee on the repair.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Grapevine Customers Say
"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad