Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Aubrey
Electric gate repair in Aubrey, TX typically costs $180-$490 for most common fixes like opener swaps, control board replacements, and hinge realignments, and our technicians are usually out to your property within 24 to 48 hours. The older acreage northeast of town runs on a different clock than the new subdivisions off FM 1385, and we plan our Aubrey service routes accordingly. If your gate quit mid-cycle, won’t respond to the remote, or drags against a post that the clay soil has shifted, call us at (940) 412-7340 and we’ll get you on the schedule with a written price before any bolt gets turned.
We’re a Kingswell company, independently owned and operated, and every repair we do in Aubrey carries the same four written promises: a real arrival window, a written price up front, a clean job site, and a 365-day guarantee on the work. If it fails inside that year, we come back and make it right at no charge. That’s not a marketing line. It’s printed on every invoice.
Why Portcullis Gate Repair Is Aubrey’s Preferred Electric Gate Repair Company
Aubrey isn’t a one-size-fits-all gate market. Drive the roads around Paloma Creek, Winn Ridge, or up 2934 toward Sandbrock Ranch and you’ll see what we mean: a brand-new community gate system on one corner, then a quarter mile later a 30-year-old pipe gate on a caliche driveway with a solar panel wired to a Viking operator from the Clinton administration. Our Electric Gate Repair team knows the difference because we’ve worked both. A tech who only sees suburban fence-line gates will misdiagnose an acreage swing gate that’s fighting a heaved post. Ours don’t.
Our Aubrey customers tend to call us after getting burned: a company that quoted over the phone, then doubled the price standing in the driveway. Or a tech who “fixed” a control board in March and vanished by Memorial Day when the same fault came back. We answer the phone with a live person 24 hours a day, including holidays. We show up in the window we committed to, in uniform, background-checked, and we hand you the price in writing before we touch a single wire. That’s the Kingswell Way, and it’s the same standard at every independently owned Kingswell location.
Gate Opener Repair in Aubrey
Gate opener repair in Aubrey usually means one of two jobs: replacing a tired swing-arm actuator on a rural driveway gate, or swapping a dead slide-gate motor on a community entry or newer subdivision home. Both are common here, and our first move is always the same: test the operator, find the actual point of failure, and quote you a fixed price before we start. A typical swing gate opener swap on an Aubrey acreage property runs $350-$650 parts and labor, depending on whether we’re reusing the existing bracket geometry or starting fresh. Slide gate operator replacements on longer runs run $500-$1,100.
Swing-Arm Operators on Acreage Gates
The actuator, which is the motorized arm that physically pushes the gate open, takes a beating on Aubrey’s long rural driveways. Daily cycles, freeze damage, and posts that shift with the clay all shorten its life. When one fails, we don’t just bolt on a new arm. We check the post plumb, the hinge load, and the operator’s current draw so the new actuator isn’t fighting the same war the old one lost.
Slide Gate Motors on Community Entries
Smaller subdivisions and gated estates around Aubrey often run slide gate operators on ornamental entry monuments. These motors fail differently than swing arms: gear wear, limit switch drift, and chain tension loss. We stock common slide gate parts for Aubrey calls and can usually quote and complete a motor replacement same visit, unless the post or rail itself needs resetting from soil movement.
Automatic Gate Repair in Aubrey
Automatic gate repair in Aubrey covers the whole system, not just the motor. When we get called out for a gate that won’t open, it’s rarely one clean failure. It’s a control board responding to a safety sensor that’s out of alignment, or an operator burning itself out trying to push a gate whose post has tilted from Blackland Prairie clay expansion. A full automatic gate diagnosis and repair in Aubrey usually lands between $220 and $480, while a complete operator replacement with new safety photocells runs $650-$1,400 depending on the gate’s length and weight.
Control Boards and Sensors on Older Systems
A surprising share of Aubrey’s automatic gate failures trace back to a control board that’s 20 years old and no longer supported. We can often retrofit a modern board into an existing cabinet, but we’re honest when that’s money poorly spent. If the board is obsolete and the operator is 25 years old, a full swap may cost less than chasing failure after failure. We’ll show you the math either way, in writing.
Solar Systems on Rural Driveways
Out on the acreage roads northeast of town, automatic gates often run entirely on solar trickle-charge setups with battery backup. In the cloudy stretch from November through January, those batteries drain and don’t recover. Our techs know to check battery voltage and panel output before condemning a motor. Sometimes the $800 problem is actually a $160 battery bank replacement.
Trusted Brands We Service in Aubrey
We carry certified service experience on nine major gate operator brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Aubrey specifically, the older Viking and Linear units hold a special place, because we work on them constantly on the acreage properties between Paloma Creek and the Denton County line. We stock the common replacement parts for those legacy systems in our Dallas-Fort Worth metro office, which means we’re not waiting five days on a freight shipment to get your gate moving again. If your operator brand isn’t one we service, we’ll tell you that up front, not after we’ve disassembled your gate.
Common Electric Gate Repair Problems We See in Aubrey Homes
- Heaved gate posts from expansive clay soil. Denton County’s Blackland Prairie clay shrinks in drought and swells in rain, and that cycle tilts gate posts out of plumb. A swing gate that’s binding against its own post will burn out the operator motor trying to force it open.
- Dead solar batteries on older acreage gates. The 1990s-era Viking and Linear solar setups northeast of Aubrey predictably lose their batteries by January each year. The combination of cloudy winters and heavy daily cycles is a seasonal call we can almost schedule in advance.
- Obsolete control boards that no longer accept replacement parts. After a North Texas ice storm or a lightning strike, a 1998 control board may simply be unserviceable. We’re honest when the retrofit doesn’t make financial sense and a modern operator is the cheaper long answer.
- Safety sensor alignment failures on community gates. Photocells that sit slightly out of alignment will refuse to close a gate, which is a safety feature working correctly rather than a broken part. We realign rather than replace when the sensor itself is healthy, saving Aubrey homeowners hundreds.
Pricing for Electric Gate Repair in Aubrey, TX
Here are the numbers we give Aubrey customers over the phone, because you should know the range before you decide who to call:
- Diagnostic visit: $75-$135, applied toward repair if you hire us
- Swing gate opener replacement: $350-$650
- Slide gate motor replacement: $500-$1,100
- Control board replacement or retrofit: $180-$420
- Solar battery bank replacement: $150-$320
- Safety photocell replacement and realignment: $120-$260 per pair
- Hinge and post realignment: $200-$475 depending on post condition
Those are working ranges, not vague estimates. The final price depends on gate length, operator brand, and whether the post itself needs resetting in fresh concrete, but you’ll have it in writing before we start. Every Aubrey job includes a free estimate, and the written quote is the exact number on your invoice unless you approve additional work first. Call (940) 412-7340 to get a fixed price from a live person.
We Also Serve Cities Near Aubrey
Our electric gate repair crews serve Aubrey and the surrounding Denton County and Collin County communities, including Frisco, Little Elm, Denton, and Prosper. If you’re on the edge of Aubrey in an unincorporated pocket, or your gate sits closer to a neighboring city line, give us a call and we’ll confirm coverage and route a tech to you. This page covers Electric Gate Repair in Aubrey specifically, but the Kingswell Guarantee travels with us anywhere we go.
Serving Aubrey, TX - Our Local Coverage Area
We’re based in the Aubrey area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Aubrey
It depends on whether the control board survived and whether the motor itself seized. On many older Aubrey Viking operators, the control board is the weak point and a retrofit into the existing cabinet runs $180-$420. But if the gear housing cracked during the freeze or the board is genuinely obsolete, we’ll recommend a modern LiftMaster operator instead, because retrofitting a 25-year-old unit you can no longer source parts for usually costs more over two years than a clean swap. Call (940) 412-7340 and we’ll diagnose it in writing before you spend a dollar.
Nine times out of ten on Aubrey acreage, it’s a post that Blackland Prairie clay has heaved out of plumb, which binds the gate against the hinges and overloads the operator. The operator senses the resistance and stops to protect itself. We reset the post in fresh footing, realign the hinges, and the gate runs clean again. If the operator was damaged while fighting the bind, we’ll quote that separately, always in writing first.
Yes, and it’s a pattern we can almost set a calendar by on the older acreage roads northeast of Aubrey. Prolonged cloudy winters plus shortened solar charging days drain the battery bank on 1990s-era Viking and Linear solar setups by mid-January. The fix is often a battery replacement, not a whole new gate system. We can also install a hardwired trickle charger or a larger battery array if your gate cycles too many times per day for the current solar panel to keep up.
We strongly recommend them, and on any new operator installation they come standard. If your older gate predates modern safety requirements and doesn’t have photocells, a retrofit is straightforward and runs $120-$260 per pair. These sensors stop the gate if a person, vehicle, or animal is in the closing path, and they’re a worthwhile upgrade on Aubrey’s horse properties where animals and children are regularly moving through gate zones. We won’t install an operator without them.
Usually both, and we’ll show you why before you commit. A sagging gate is often the symptom of a post that clay movement has tilted outward, and only rehanging the gate on the same bad post means the sag returns within a year. We realign or reset the post, repair or replace the hinge blocks, and then square the gate frame so the operator isn’t dragging dead weight. That job typically runs $200-$475 in Aubrey depending on whether the post needs new concrete. Our 365-Day Done Right Promise covers the whole repair, post included.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Aubrey and the surrounding Denton County communities since 2008.
Contact Portcullis Gate Repair in Aubrey
If your automatic gate won’t open, drags halfway, or hasn’t worked since the last hard freeze, call (940) 412-7340 now. A live person answers around the clock, every day including holidays. We’ll schedule a real arrival window, send a background-checked tech in uniform, and put your price in writing before any work begins. If the repair fails inside 365 days, we return and correct it at no charge, under the Kingswell Guarantee. That’s the only way we’ve worked since 2008.