Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Colleyville
Electric gate repair in Colleyville usually means one of two things: an operator that quit responding, or a heavy estate gate that no longer swings true. Most calls we run in Colleyville are for dual-swing wrought iron gates on larger properties, where the gate has been hung for 20 or 30 years and the operator is fighting a post that moved. We’ll send a technician who knows the difference between an electrical fault and a structural one. That’s the fix that actually lasts. If your gate is stuck, grinding, or dead, call (940) 412-7340 and we’ll give you a written price before any work starts.
Why Portcullis Gate Repair Is Colleyville’s Preferred Electric Gate Repair Company
Portcullis Gate Repair has served Colleyville from our independently owned Kingswell location since 2008, and the work we do here is held to the same four written promises as every Kingswell company: a price in writing before the first bolt turns, a real arrival window, a clean job site, and a written guarantee on the repair. That guarantee lasts 365 days. If the repair fails inside that period, we return and correct it at no charge under the 365-Day Done Right Promise. No callbacks, no arguing, no second invoice.
Colleyville homeowners tend to know their gates better than most. They’ve lived with them for years. And a lot of them have already been through a repair that didn’t stick. Dean Prescott, who leads our Colleyville service, trains our technicians on that exact problem: finding the cause behind the cause. A gate that drags at the latch is rarely just a hinge. Around here it’s often a hinge post that’s leaned two or three degrees in Tarrant County clay, and a fresh hinge on a moving post buys you maybe six months. We’d rather fix the post once and be done.
When you call our Colleyville line, a live person answers. Around the clock, including holidays. Not a voicemail tree. You’ll know who’s coming and what they look like before the truck pulls into your driveway, because every technician is uniformed and background-checked. Dispatch for Colleyville is coordinated from our Dallas-Fort Worth office, and our crews run Colleyville routes daily.
We also carry a strong stock of common parts for the estate systems we see here, which means fewer trips back across town and a faster repair for you. This matters when your gate is the only thing between your driveway and the street.
Gate Opener Repair in Colleyville
Gate opener repair in Colleyville almost always starts at the operator, the motorized box that drives the arm or the chain. On older estate properties off Cheek-Sparger Road and Glade Road, the operator is often 15 to 30 years old. Many were installed during the 1990s and 2000s building boom, which means the original unit is now well past its design life. A typical gate opener repair in Colleyville runs $225 to $480 for capacitor, limit switch, or gear replacement. A full operator swap, when the old one is beyond saving, typically lands between $1,100 and $2,400 installed, depending on the operator model and the condition of the gate itself.
Board and limit switch issues
When an opener runs but won’t stop at the right point, or runs one direction and not the other, the limit switch is the first suspect. On a 25-year-old FAAC or early LiftMaster, the control board is the second. Some boards for these older systems are discontinued, which means the fix is a new operator configured to work with the existing gate. We’ll never sell you a new operator until we’ve confirmed the old one can’t be repaired honestly.
Wiring and sensor faults
Buried cable from the house to the gate takes a beating in North Texas. Summer heat degrades the insulation, and when the ground shifts, so does the conduit. What looks like a dead board is sometimes just a nick in the line that overdraws current. We test the circuit before we condemn the board.
Automatic Gate Repair in Colleyville
Automatic gate repair in Colleyville covers the whole moving system: the gate panels, the hinges, the operator, the safety photocells, the keypad, and the loop detectors under the driveway. When a heavy ornamental iron gate won’t open or closes on a car, there’s usually more than one failure at play. Most automatic gate repair calls in Colleyville run $280 to $650 for the diagnosis and mechanical or electrical fix. When the repair requires resetting a post in new concrete, the total runs higher, typically $900 to $1,800, because the work involves cutting, jacking or excavating, and letting the footing cure before the gate is re-hung.
Safety edge and photocell retrofits
Gates hung before current UL 325 safety standards often lack the sensor array newer codes expect. A gate that reverses on contact but has no non-contact sensor is a liability on a property with kids or frequent visitors. We can retrofit safety photocells and edges onto most existing Colleyville gates without replacing the whole system.
Structural alignment on heavy estate gates
If your gate opens halfway and binds, the panel itself may be out of plumb. Colleyville’s expansive black clay is rough on gate posts. We re-plumb posts, re-set footings, and then align the operator to the corrected geometry. That order of operations is the whole trick.
Trusted Brands We Service in Colleyville
Our technicians carry factory training on the gate operators we see most in Colleyville: Linear, Viking, Ghost Controls, and DoorKing, along with FAAC, Elite, LiftMaster, BFT, and Mighty Mule. We keep common control boards, capacitors, remote transmitters, and safety edges stocked for these systems, which means we can often repair the same day we diagnose. If your Colleyville gate runs a discontinued DoorKing board or an older Viking actuator, we’ll tell you straight what’s still available and what has to be replaced, and we’ll quote the replacement in writing before ordering a single part.
Common Electric Gate Repair Problems We See in Colleyville Homes
- Obsolete control boards. Many Colleyville estate operators from the 1990s and 2000s used FAAC, Elite, or early LiftMaster boards that are no longer manufactured. A simple logic fault becomes a full operator replacement because the part no longer exists.
- Heaved hinge posts. Shallow footings poured during the 1990s building wave sit in Tarrant County’s expanding black clay. The clay heaves and shrinks seasonally, and a post that has leaned just two degrees will bind the gate panel against the operator every cycle.
- UV-degraded buried wiring. Older automatic gate circuits were often pulled through thin-wall conduit or direct-buried romex. July and August heat breaks down the insulation, and the failure is intermittent at first: the gate works in the morning and faults by 3 p.m.
- Photocell misalignment from post movement. When the gate post shifts, the safety photocell shifts with it. The beam no longer aligns across the driveway, so the gate refuses to close or reverses for no visible reason. The sensor is fine. The post is not.
Pricing for Electric Gate Repair in Colleyville, TX
Most straightforward electric gate repairs in Colleyville run $275 to $650, which covers the service call, diagnosis, labor, and common parts like capacitors, limit switches, remotes, and photocells. Gate opener replacement runs higher, typically $1,100 to $2,400 installed, depending on whether you’re keeping the existing gate panels and what brand of operator you’re installing. Post resetting and re-plumbing work starts around $900 and climbs with the size of the gate and the footing depth. Every price is written down before we start, and that written price is the one you pay. No after-the-fact add-ons. Call (940) 412-7340 for a free estimate on your specific gate.
We Also Serve Cities Near Colleyville
Our Colleyville routes also cover Bedford, Euless, Southlake, and Hurst. If you’re just outside Colleyville and you need Electric Gate Repair, we can usually reach you the same day. For full service details in this area, see Electric Gate Repair in Colleyville.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Colleyville
Usually the gate itself. When a heavy dual-swing gate opens halfway and then binds, the most common cause in Colleyville is a hinge post that has leaned out of plumb in the clay soil. The operator is still pushing, but the panel is fighting the post. We diagnose this by measuring the post angle and observing where the gate binds before we touch the operator. Call (940) 412-7340 and we’ll tell you what’s actually wrong, in writing, before any work begins.
Yes. Most gates hung before the mid-2000s lack the non-contact safety sensors required on modern installations. We can add photocells and safety edges to almost any existing automatic gate in Colleyville, including older FAAC and Elite systems, without replacing the whole gate. The work typically runs $300 to $700 depending on the number of sensors and the wiring distance from the operator to the gate.
Because the post underneath the hinge is moving. Colleyville’s black clay soil expands when wet and shrinks when dry, and a shallow footing from the 1990s will heave with it. A sag correction that only adjusts the gate panel leaves the moving post in place, so the gate re-binds within months. The real fix is re-plumbing or resetting the post. That is the prerequisite for any alignment that holds. Call (940) 412-7340 and we’ll check your post depth before recommending any mechanical work.
The buried cable is the prime suspect. August heat in Tarrant County degrades the insulation on older direct-buried wiring, and the failure is temperature-sensitive: the gate runs in the morning, then faults in the afternoon heat. The control board tests fine, which is why this problem gets misdiagnosed so often. We replace the cable run, which typically costs $400 to $900 depending on the run length and whether we can pull through existing conduit.
If the operator is 25 years old and the control board has failed, replacement is usually the cheaper answer. Boards for many 1990s and early 2000s operators are discontinued, and even a working board on an operator that age means capacitors and gears are next in line. A new operator installed on a sound gate runs $1,100 to $2,400 in Colleyville, and it carries a written 365-day guarantee through the Kingswell Guarantee. We’ll give you both numbers, repair versus replace, and you choose. Call (940) 412-7340 for that quote today.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Colleyville since 2008.