Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Colleyville
A new driveway gate installation in Colleyville typically runs $3,800 to $9,500 for a standard dual-swing ornamental iron system, and most projects take two to four weeks from measure to final walkthrough. We’re not the crew that rushes a post into wet clay and calls it done. Around here, the soil decides whether a gate stays plumb, so we build every Colleyville installation around the footing first and the iron second. Call (940) 412-7340 and Dean Prescott will walk you through what your driveway actually needs, in plain words, with a written price before any work starts.
Why Portcullis Gate Repair Is Colleyville’s Preferred Gate Installation Company
Colleyville homeowners call us after another gate company has already let them down. Maybe the first crew quoted one price on the phone and a different one at the door. Maybe the gate sagged six months after install and nobody returned the call. If you need Gate Repair in Colleyville, we answer every call. Portcullis Gate Repair has operated as a Kingswell company since 2008, and we answer to the same written standard on every job: the Kingswell Guarantee. A written price before any work starts, a real arrival window, a clean job site, and a written 365-day guarantee on the installation. If something we installed fails inside that year, we return and make it right at no charge. That’s the 365-Day Done Right Promise, and it’s stamped on your invoice, not whispered over the phone.
What we know about Colleyville specifically is that this city runs heavy on ornamental iron estate gates, far more per capita than Hurst, Euless, or Bedford. We’re the Gate Installation team that already knows what those gates look like at year 20, because we see them all week. Gate Installation in Colleyville means working on 1980s and 1990s custom homes with original operators still in the ground, posts that have been fighting Tarrant County clay for decades, and owners who want the next gate to outlast the first one. That’s the job we’re built for.
Gate Fabrication in Colleyville
Gate Fabrication in Colleyville is when the gate itself is built to the exact width, height, and swing clearance of your driveway opening rather than pulled off a rack. Most Colleyville driveway openings are wider than standard, because the homes sit on larger lots with side-entry garages and long approaches from streets like Pleasant Run Road, Cheek-Sparger Road, and Glade Road. A fabricated gate matches the opening, the post spacing, and the style of the existing ironwork so the whole front of the property reads as one piece. For a dual-swing ornamental iron driveway gate, fabrication and install together in Colleyville typically run $4,500 to $9,500 depending on width, height, iron density, and whether we’re matching an existing fence line.
Matching Existing Estate Ironwork
Many Colleyville homes already have ornamental iron fencing along the property line, and a new gate should look like it was always there. We measure the picket profile, the top rail style, the spacing, and the finish, then fabricate the gate to match. It’s slower than ordering a standard panel, but it’s the difference between a gate that belongs to the house and one that looks like a patch.
Custom Pedestrian and Double Gates
We fabricate pedestrian gates that swing within a larger driveway gate, and double gates where two panels meet at the center. Double gates on Colleyville driveways run wider than most, often 14 to 20 feet, which means every panel gets its own hinge post set deep enough for the clay. We build both panels to the same weight and balance so the operator doesn’t have to push against a heavy favorite.
Automatic Gate Installation in Colleyville
Automatic Gate Installation in Colleyville means pairing a new or existing gate with a motorized operator, safety photocells, and the underground wiring or solar package that powers it. On a standard dual-swing estate gate, the operator, safety edges, photocells, and installation in Colleyville typically run $1,800 to $3,400 on top of the gate itself. The most important part of that job is not the motor. It’s the post. We’ve reset enough 1990s-era Colleyville posts leaning two or three degrees to know that no operator, new or rebuilt, will run clean against a post that’s already moving with the clay.
Retrofit vs. Full Replacement
If your gate panels and posts are sound, you don’t need a full gate installation. You need a new operator mounted to a stable post. We retrofit all over Colleyville, pulling obsolete FAAC, Elite, and early LiftMaster estate units and installing current operators that fit the existing gate weight and swing. When the posts are shot, retrofitting is a waste of your money, and we’ll tell you that before we take the old motor off.
Safety Edges and Photocells
Every automatic gate installed in Colleyville gets safety photocells across the opening and monitored safety edges on the closing panels. The Texas sun cooks buried cable insulation around here, and the safety circuit is always the first thing to go intermittent in July and August. We run new cable in conduit where the old line has failed, and we test the entire safety loop before we call the job done.
Trusted Brands We Service in Colleyville
Our technicians are trained on nine major gate operator brands, and around Colleyville we see a lot of DoorKing and Elite on older estate systems, plus Viking on newer high-cycle installs. We stock common control boards, limit switches, and receiver parts for those brands so a Colleyville repair doesn’t stall while a part ships from out of state. If you’re replacing an old unit, we’ll recommend a brand that matches your gate’s weight and swing pattern, not whatever happens to be on the truck. The goal is a gate that cycles clean for years, not a box that fits a sales quota.
Common Gate Installation Problems We See in Colleyville Homes
- Leaning posts from shallow 1990s footings. Many original Colleyville driveway gates were set in footings too shallow for the area’s expansive black clay. The post leans before any hinge adjustment will hold, which means the real fix starts with re-plumbing or resetting the post, not tightening bolts.
- Obsolete control boards on 15-to-30-year-old operators. FAAC, Elite, and early LiftMaster estate units from the original build are now at or past end-of-life. When the board faults out and parts are no longer made, retrofitting is often more expensive than a new operator, and we’ll show you the numbers before you choose.
- Intermittent safety photocell and loop detector failures. Buried operator cable insulation UV-cracks and heat-ages through North Texas summers. The safety circuit starts tripping randomly in July and August, and chasing it with a multimeter without replacing the cable is a losing game.
- Drag-scored gates on settled concrete driveways. Clay movement doesn’t just move posts; it moves driveway slabs too. A gate that cleared the concrete in winter may drag by August. We account for seasonal ground movement when we set panel heights on a new installation.
Pricing for Gate Installation in Colleyville, TX
Here are honest ranges for what Colleyville homeowners pay:
- Custom dual-swing ornamental iron gate, fabricated and installed: $4,500 to $9,500
- Automatic operator, safety edges, photocells, and install on an existing gate: $1,800 to $3,400
- Pedestrian gate with matching ironwork: $1,200 to $3,200
- Post reset or new footing with re-plumb of an existing gate: $900 to $2,200 per post
- Full gate and operator package on a new estate driveway: $6,500 to $13,000
What changes the number is gate width and weight, whether we’re matching existing ironwork, how deep the new footings need to go for the clay on your lot, and whether we’re replacing buried cable. You’ll get the price in writing before we start, and that price is the price. No bolt turned before you’ve signed off on the number. Call (940) 412-7340 and Dean Prescott will give you a straight quote for you specific driveway, not a range from a national website.
We Also Serve Cities Near Colleyville
Portcullis Gate Repair is an independently owned Kingswell location serving Colleyville and the surrounding Tarrant County communities. Our crews work gate installation jobs in Bedford, Euless, Southlake, and Hurst on the same schedule as Colleyville work. Dispatch and scheduling coordinate from the brand’s Dallas-Fort Worth office, and the guarantee on the work doesn’t change at the city line.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Colleyville
Usually not, and here’s why: the boards on 15-to-30-year-old FAAC and Elite estate operators around Colleyville are obsolete, and nobody is manufacturing drop-in replacements. We can sometimes keep an older unit alive with a rebuilt board or a relay fix, but when the board is the failure point, a new operator is frequently cheaper than chasing aftermarket parts and patch labor. Call (940) 412-7340 and we’ll tell you straight which way the math goes on your specific unit.
Because the post is moving, not the hinge. In Colleyville’s expansive black clay, a 1990s-era gate post set in a shallow footing will lean two or three degrees before any hinge adjustment shows wear. Tightening the hinge without re-plumbing the post just transfers the strain to the operator. The fix that lasts is resetting or reinforcing the post footing first, then truing the gate to the new plumb line.
For most Colleyville estate driveways, a dual-swing gate is the right answer, because the driveways are wide and the front setbacks are deep enough to accommodate panels that swing inward or outward without blocking the street. A slide gate needs a long, straight run of fence or wall alongside the driveway to tuck into when open, and most Colleyville lots with ornamental iron frontage don’t have that run. We’ll measure your opening and tell you which option actually fits your property, not which one is easier to quote.
Because the buried operator cable has been baking in North Texas heat for 10 to 20 years, and the insulation on the low-voltage safety circuit is the first to crack. When summer temperatures peak, the conductors short or open intermittently, and the gate faults out the safety loop. Replacing that cable in conduit, not wrapping it in tape, is the fix that survives the next Colleyville summer.
If the gate panels and posts are sound, a retrofit is all you need: we mount a new operator, run new safety edges and photocells, and you’re done. If the posts are leaning, the gate is sagging, or the iron is rusted through at the hinges, retrofitting is money thrown at a foundation problem. We’ll show you the post’s lean with a level before you spend a dollar, and we’ll put the recommendation in writing. Call (940) 412-7340 for an exact quote; estimates in Colleyville are free.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Colleyville since 2008.