Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Hurst
Gate installation in Hurst runs $1,400-$4,900 for most residential swing gates, with driveway gate operator installation adding $950-$2,200 depending on the brand and the condition of the existing posts. We install driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates for homes across Hurst, from the 1960s ranch neighborhoods near Pipeline Road to newer subdivisions off Precinct Line Road. Call (940) 412-7340 and we’ll give you a written price before any work starts. Dean Prescott leads our Hurst installation crews, and every job carries the 365-Day Done Right Promise in writing.
Why Portcullis Gate Repair Is Hurst’s Preferred Gate Installation Company
We’re an independently owned Kingswell company, which means our Hurst customers get the same four written promises on every job: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on the work. Hurst homeowners have dealt with enough no-shows and door-hiked quotes to know the difference. When you call (940) 412-7340, a live person answers, and the tech who shows up is background-checked and in uniform with the Portcullis name on the truck.
Our crews serve Hurst local streets every week. We know the difference between a 1968 ranch off Pipeline Road and a 1990s two-story near Hurst Town Center. That local knowledge matters when we’re quoting a gate installation, because the soil under the post footing changes the whole job. The Kingswell Way is five plain commitments: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails. That’s not marketing language. It’s stamped on every invoice.
Gate Opener Installation in Hurst
Gate opener installation in Hurst typically costs $950-$2,200 for the operator, mounting hardware, safety photocells, and labor, assuming the existing gate panel and posts are structurally sound. On Hurst’s Blackland Prairie clay, that assumption fails often. A gate that’s been dragging or binding because a post tilted streetward will eat a new opener motor within a season. When we install an opener here, we check the post plumb and the hinge condition first, because the opener is only as reliable as the gate it moves.
Retrofitting an Operator to an Older Gate
Hurst has thousands of original ornamental steel gates from the 1960s and 1970s, and many of them are structurally tired. We can often retrofit a modern operator like a Linear or LiftMaster swing arm to an older gate if the hinges are still tight and the post is deeply set. If the hinge leaves were bent by Winter Storm Uri ice loading, or the welds cracked through years of Texas heat expansion, the honest recommendation is usually to fabricate a new gate panel rather than bolt a $1,500 operator onto a panel that won’t swing true.
Safety Equipment on Hurst Driveway Openers
Every automatic gate opener we install in Hurst includes UL 325 entrapment protection: a working safety photocell and, on high-risk applications, a contact edge sensor. That’s non-negotiable. A swing gate closing on a child or pet is not a warranty issue; it’s a life issue, and we won’t install an opener without the safety devices functioning and tested.
Gate Fabrication in Hurst
Gate fabrication in Hurst runs $1,600-$4,900 for a standard residential steel swing gate, powder-coated, with new hinges and a deep-set post assembly where the soil requires it. We fabricate driveway gates, double gates, pedestrian gates, and side-yard gates to match the setback and style of the home, not from a catalog photo that looks wrong the moment the truck pulls away.
When Replacement Beats Repair
Some Hurst gates should not be repaired. If the original 1972 tubular steel panel has bent hinge leaves, cracked welds, and a sag that a jack can’t correct, every repair dollar is money that could have gone toward a new fabricated gate with sealed bearings and a frame that clears its opening on a 105°F afternoon. We’ll tell you straight. The written quote covers both the repair option and the fabrication option, so you can compare real numbers side by side.
Fabrication for Hurst-Sized Lots
Hurst lot lines are tighter than newer exurbs, which means driveway gates here are often set within a few feet of the street and must swing inward across a short apron. We measure for that. A gate fabricated two inches too wide or hung to swing wrong on a Hurst driveway will hit a car bumper or a fence post every single cycle. Our fabrication drawings are based on measured openings, not estimated ones.
Trusted Brands We Service in Hurst
Our installation crews carry certified experience on nine gate operator brands, but in Hurst we install and service Linear, Viking, Ghost Controls, and DoorKing most frequently. Hurst ranch homes from the 1970s and 1980s often still run the original Viking or older DKS-style opener, and we keep common local parts for those units on the truck. That means faster turnaround when a control board dies on a Viking swing arm, and no week-long wait for a replacement part your gate can’t close without. Call (940) 412-7340 and tell us what brand is in the box; chances are we already know the failure.
Common Gate Installation Problems We See in Hurst Homes
- Tilted posts from expansive clay: Hurst sits on Blackland Prairie clay that shrinks in dry spells and heaves after rain. We regularly find shallow-set gate posts that have tilted toward the street over a single wet season, throwing the gate out of plumb and the latch out of alignment.
- Bent hinge leaves from ice storms: Winter Storm Uri in February 2021 loaded gate frames across Tarrant County with ice weight that bent hinge leaves on older tubular steel gates. When those same bent hinges get reused on a new opener installation, the rack and pinion or swing arm binds and burns out the motor.
- Thermal expansion binding in summer: Hurst summers regularly cross 100°F, and steel gates expand. A gate that was fabricated without enough frame clearance will bind against its frame on a hot afternoon and stall the operator, tripping the safety circuit and leaving the driveway blocked.
- Missing entrapment protection on new installs: We still encounter fresh installations in Hurst where someone mounted an automatic opener with no working safety photocell or edge sensor. On a swing gate, that’s a serious risk to children and pets. We won’t leave a gate like that, and we’ll test every safety device before we call the job done.
Pricing for Gate Installation in Hurst, TX
What drives the price in Hurst is the post footing. A simple pedestrian gate installation with a single deep-set post and a fabricated steel panel runs $1,400-$2,300. A full driveway swing gate with a new operator, two deepened concrete footings with rebar, safety photocells, and fabrication runs $3,200-$4,900. Double driveway gates run $4,200-$6,800 because there are two panels, two post assemblies, and a synchronized operator setup. Sliding gate installations run $3,500-$6,200 depending on the track run and the gate weight. Solar openers for chain-link side gates run $700-$1,200 installed, pending post condition. Every quote is written, itemized, and agreed before we turn a single bolt. Call (940) 412-7340 for a free measured estimate at your Hurst home.
We Also Serve Cities Near Hurst
Our crews serve Hurst and the surrounding Tarrant County communities, including North Richland Hills, Bedford, Colleyville, and Haltom City. If you’re just across the city line, call (940) 412-7340 and we’ll schedule a measured estimate. Our Gate Installation standards travel with us, but the post footing on that North Richland Hills clay will not care where the city limit sign is.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Hurst
Yes, if the gate panel is structurally sound and the hinge post is still plumb and deeply set. We install modern operators on original Hurst steel gates regularly, but we always check the hinge leaves and post footing first. If the post has tilted or the hinges were bent by ice, retrofitting an operator to that panel will usually cost more over time than fabricating a replacement. Call (940) 412-7340 and we’ll give you a written assessment of both options.
In Hurst, the most common cause is expansive Blackland Prairie clay under a shallow-set post footing. The clay swells after spring rain and heaves the post out of position, which moves the gate off its hinge alignment so it drags against the frame or latch post. This is why we over-excavate and deepen the post footing on every Hurst installation; a shallow-set method that works in sandier suburbs will guarantee a callback here within two to three years. Call (940) 412-7340 and we’ll reset the post properly.
UL 325 entrapment protection is required on every new automatic gate installation in Hurst, which means a working safety photocell on the gate path and, on higher-risk applications, a contact edge sensor that reverses the gate if it touches something while closing. We install and test both on every operator job. If a gate closes on a child or a pet, no warranty conversation matters after that. Call (940) 412-7340 if your current gate lacks working entrapment protection.
Yes. Solar gate operators for chain-link side gates in Hurst run $700-$1,200 installed, assuming the existing post is plumb and the gate swings freely. We install Solar Ghost Controls and Mighty Mule units regularly on side-yard chain-link gates across Hurst. The sun exposure on a south-facing Hurst fence line is usually enough year-round, and we’ll verify panel placement during the measure. Call (940) 412-7340 for an exact quote.
We install and service nine major gate operator brands, and in Hurst we see Linear, Viking, Ghost Controls, and DoorKing most frequently on older ranch properties. Our techs arrive with brand-specific training and common local parts for those units on the truck. Whether you’re replacing a 1980s Viking swing arm or adding a new Linear unit to a fabricated gate, we’ll quote the exact model and labor in writing before the job starts. Call (940) 412-7340 to schedule a measure.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Hurst, TX with gate installation and repair since 2008.