Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Everett
Electric gate repair in Everett usually costs between $180 and $480 for a typical service call, with most jobs completed the same day we arrive. Dean Prescott and our Portcullis team work on gates throughout Everett, from the Marina-side streets to the north-end corridors off Broadway, and we quote every repair in writing before a single bolt gets turned. If your gate won’t open, won’t close, or stops halfway, call us at (940) 412-7340 and a live person answers. No voicemail tree, no callback queue, no “we’ll get back to you Monday.”
Everett’s salt air and nine-plus months of rain do things to gate hardware that inland techs rarely see. We plan for it on every Gate Installation in Everett job here. The hinge that looks fine from ten feet away is often furred with rust at the pivot. The control board that “just quit” usually shows green corrosion on its edge connectors. We know what to look for before we even pull into your driveway, because we’ve been working these blocks long enough to know what the marine layer does to steel, wood, and electronics.
Why Portcullis Gate Repair Is Everett’s Preferred Electric Gate Repair Company
We’re a Kingswell company, and we’ve carried the Kingswell Guarantee on every single job since 2008: a written price before any work starts, a real arrival window, a clean job site when we leave, and a written guarantee on the repair. If a repair fails within 365 days, we come back and fix it at no charge under the 365-Day Done Right Promise. That’s not a vague promise. It’s printed on every invoice we hand you.
Everett homeowners have told us the same story more times than we can count: a gate company quoted one price over the phone, then doubled it after the operator was already disassembled on the driveway. Or a tech showed up three days late and the fix failed six weeks later. Our backgrounds are checked, our techs wear uniforms, and you’ll know who’s coming before the truck arrives. The phone is answered by a human being, 24 hours a day, seven days a week, including holidays. Dean Prescott holds this location to the identical standard every Kingswell company follows.
We dispatch from our Seattle office and crew Everett locally, so our response times here aren’t padded by driving across the metro. If your gate is stuck open and your dog is eyeing the street, that matters.
Our Electric Gate Repair techs service nine major operator brands, but in Everett, the work skews toward legacy LiftMaster, DoorKing, FAAC, and Viking units that were installed decades ago. We keep common boards, capacitors, and limit switches on the truck so we’re not running back to a supply house mid-repair.
Gate Opener Repair in Everett
Gate opener repair in Everett typically runs $195 to $410 depending on whether we’re replacing a failed control board, a worn limit switch, or the motor itself. The first thing we tell Everett homeowners is that the opener and the gate are two separate systems that fail in different ways, and the marine air here attacks both of them differently. Zip codes across Everett see opener failures that inland cities simply don’t: salt-carrying wind off Port Gardner gets into the operator housing and works on edge connectors, terminals, and unsealed boards year-round. What looks like a dead motor is often just a board that has been slowly corroding since the last fall rain cycle.
Control Board Diagnosis First
When a 1980s or 1990s LiftMaster or DoorKing operator stops responding after heavy rain, Everett techs at our company check the board before condemning the motor. Green fuzz on the edge connectors or lifted traces on the PCB is a board-level failure, not a motor failure. Replacing just the board usually saves hundreds of dollars versus replacing the entire operator, and we’ll only recommend the full swap when the board is obsolete and no longer available from the manufacturer.
Limit Switch and Gear Work
Older operators use mechanical limit switches that set the open and close stopping points. In Everett’s damp conditions, these switches corrode internally and cause the gate to stop short, overrun, or reverse mid-cycle. A limit switch replacement for a FAAC or Viking opener typically runs $165 to $290 parts and labor. We set the stops, test under load, and re-aim the safety photocells before we call the job done.
Automatic Gate Repair in Everett
Automatic gate repair in Everett spans roughly $220 to $480 for jobs involving safety sensors, receiver boards, and actuator adjustments. The defining factor here is that automatic systems in Everett’s coastal neighborhoods operate in a salt-air environment that accelerates oxidation on every exposed connector and hinge pin. A newer vinyl or aluminum ornamental gate near Silver Lake has entirely different failure modes than a 1960s wood swing gate in Riverside, and our diagnostics reflect that. We don’t apply a one-size-fits-all checklist. We look at how your specific gate was hung, what it’s made of, and how many wet seasons it has survived.
Safety Sensor Repairs
UL 325 entrapment protection is not optional on automatic gates, even when the gate predates the rule. If your 1980s automatic swing gate is still running without photocells or a contact edge, we will not simply “get it working” and walk away. We’ll bring the safety system up to code as part of the repair, which typically adds $140 to $260 to the ticket depending on whether we’re installing new photocells or replacing a corroded receiver. It’s the right thing, and it’s the law.
Receiver and Remote Repairs
When the remote works from the driveway but not from the street, Everett homeowners often assume the receiver is failing. Sometimes it is; sometimes it’s radio interference near the Marina or the Naval Station perimeter. We test receiver sensitivity, check antenna routing, and replace receiver boards when necessary rather than selling you a new opener you don’t need. A receiver board replacement for a Linear or BFT unit runs about $145 to $280 installed.
Trusted Brands We Service in Everett
We carry service parts for the nine major gate-operator brands, and in Everett the demand concentrates on FAAC, BFT, Linear, and Viking for swing and slide gates, plus legacy LiftMaster and DoorKing units that are still running decades after install. We stock boards, limit switches, and remote receivers for those brands in the truck so we can complete most repairs in one visit. When a part is obsolete, we tell you honestly, and we give you a written price for the retrofit option instead of patching a dying board and hoping it holds through the next wet season.
Common Electric Gate Repair Problems We See in Everett Homes
- Legacy control boards corroded at the edge connectors. Salt-laden air off Port Gardner Bay gets into operator housings and works on unsealed PCB connectors. The operator sometimes gets replaced when only the board needed a swap, which is why we always test the board independently of the motor.
- Sagging swing gates and rotted hinge posts. Post-WWII wood gates in Riverside, Lowell, and the north-end corridors were often hung on untreated or lightly treated posts that have soaked up sixty-plus years of Pacific Northwest moisture. We pull the post, reset the footing, and re-hang with hot-dip galvanized hardware or 316 stainless.
- Zinc-plated hardware failing near the Marina. Standard big-box zinc hinges and brackets pit and seize within one to two seasons in the Everett Marina and Naval Station perimeter zones. Specifying hot-dip galvanized or 316 stainless isn’t an upsell here; it’s the minimum viable install.
- UV-fade and wet-freeze bracket cracks on south-end vinyl and aluminum gates. In neighborhoods around Silver Lake, we see bracket fractures where temperature swings below freezing follow weeks of rain. The gate racks out of alignment with the rack and pinion, which then chews the operator gear and causes a cascade failure.
Pricing for Electric Gate Repair in Everett, WA
Here are the real ranges for Everett, based on the work we actually do here, not a national average: basic limit switch and adjustment work runs $150 to $275. Gate opener board replacement runs $195 to $410. Actuator arm replacement on a swing gate typically runs $320 to $560 parts and labor. Full hinge-post replacement on a rotted wood gate runs $450 to $900 depending on footing condition and gate weight. The number we write down before we start is the number you pay. If we find something additional during the repair, we stop and quote the additional work in writing before we do it. You’ll never open an invoice bigger than the number you approved. Estimates are free, and you can reach us at (940) 412-7340 any time.
We Also Serve Cities Near Everett
In addition to serving Electric Gate Repair in Everett, our crews handle calls in Marysville, Lake Stevens, Mukilteo, and Snohomish. If your gate is on the fritz and you’re just outside Everett, call us and we’ll give you an honest answer about coverage and scheduling. The same written-price guarantee applies to every call, every city, every time.
Serving Everett, WA - Our Local Coverage Area
We’re based in the Everett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Everett
Usually not. If the board quit after moisture exposure, the likely culprit is corrosion on the edge connectors or a failed capacitor, both of which are replaceable. The motor itself often has years left. We test the board independently, and if it’s the board, we replace just that. You’re looking at roughly $195 to $410 instead of $900 to $1,600 for a full operator swap. Call (940) 412-7340 and we’ll diagnose it before recommending anything.
Sometimes yes, but often by the time a 1960s wood post in Lowell is visibly leaning, the below-grade section is rotted through. We expose the footing and check for sound wood below the soil line. If there’s solid post left, we reset it and re-hang with hot-dip galvanized hardware. If the post is gone, we replace it entirely. A full post reset and re-hang runs $450 to $900 in Everett depending on gate weight and footing depth.
Yes. The UL 325 standard applies to any automatic gate that carries people or vehicles, regardless of installation date. If your gate predates the rule and has never been retrofitted, we will add photocells or a contact edge as part of any repair we perform. Retrofit safety sensor installation runs $140 to $260 in Everett, and we won’t leave the gate running without entrapment protection in place.
Hot-dip galvanized or 316 stainless steel. Standard zinc-plated hardware sold at big-box stores simply can’t survive the salt-laden air off Port Gardner Bay. We see these hinges pit and seize within 18 to 24 months near the Marina and Naval Station perimeter. We install marine-rated hardware on every coastal Everett job, and we’ll specify it in writing so you know exactly what we’re hanging.
It’s a gate problem. The vinyl and aluminum ornamental gates installed in south Everett neighborhoods around Silver Lake expand and contract through the wet-freeze cycle, and the factory brackets are usually the first component to crack. Once the bracket lets go, the gate sags out of alignment with the rack and pinion, and the operator gear takes the abuse. We replace the cracked brackets with reinforced hardware and realign the gate so the operator stops eating gears. A bracket replacement and realignment typically runs $180 to $340. Call (940) 412-7340 for an exact quote; estimates are free.
Call Portcullis Gate Repair in Everett
If your electric gate is down, stuck, or making noises it shouldn’t, call Dean Prescott and the Portcullis team at (940) 412-7340 now. We answer live, we show up in the window we committed to, and we put the price in writing before any work begins. Every repair carries the 365-Day Done Right Promise, printed on your invoice. If it fails within a year, we come back and fix it at no charge. That’s the Kingswell Way, and it applies to every job we do in Everett.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Everett since 2008.