Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Electric Gate Repair Across White Settlement
Electric gate repair in White Settlement runs $85-$120 for a service call that includes diagnosis, with most full repairs landing between $180 and $650 depending on what failed. We work on gates in the 1940s-1960s ranch neighborhoods that make up most of this city, where original chain-link frames and aging operators need a different kind of attention than newer Fort Worth subdivisions. Portcullis Gate Repair has served White Settlement homeowners since 2008, and every job starts with a written price before any work begins. Call (940) 412-7340 and a live person answers, day or night.
Why Portcullis Gate Repair Is White Settlement’s Preferred Electric Gate Repair Company
Dean Prescott and our crew know what happens to a gate hung on Blackland Prairie clay. That matters more than most people realize. White Settlement sits on expansive soil that shrinks through 100°F summers and swells through wet winters, and gates set on the shallow footings common in 1950s construction lean, rack, and bind in ways that confuse standard repair manuals. We probe the post footing before quoting any repair here because the visible failure is rarely the root cause. Homeowners around Bomber Heights, the area near Carswell Access Rd, and the neighborhoods off White Settlement Road regularly call us for the same three issues: heaved hinge posts, obsolete operator control boards, and missing entrapment protection that fails code once a motor gets added. Our response time to White Settlement is typically same-day for emergencies, next-day for scheduled work. Call (940) 412-7340 and someone answers, not a voicemail tree.
Gate Opener Repair in White Settlement
Gate opener repair in White Settlement most commonly means replacing a control board, capacitor, or limit switch on an operator that still has life left in the motor and gearbox. The first sentence of any quote here starts with the question: is the operator repairable, or is it old enough that parts no longer exist? In White Settlement’s housing stock, we see pre-1990s openers with logic boards that were discontinued a decade ago. When the board fails on those, the honest answer is usually a retrofit or full operator swap, not a repair that dies again in six months. Most control board replacements run $220-$480. Limit switch, capacitor, and gear repairs run $150-$400. A full operator swap on an existing swing gate usually lands between $850 and $1,500 installed, depending on operator brand and access.
Control Board Failures on Older Openers
If your opener is from the 1980s or 1990s and the board fried, do not pay someone to hunt for a used replacement online. White Settlement homes with original openers from that era frequently hit this wall, and the used-board gamble almost never pays off. We recommend a modern retrofit on the same gate frame when the hinges and posts are still square.
Swing Arm Operators on Chain-Link Gates
When a White Settlement homeowner adds a swing operator to an original chain-link gate, the weak point is almost always the hinge post. Those 2-inch galvanized posts were driven into shallow collars in the 1950s, never built to carry the cantilevered weight of a motorized arm. We check the footing before bolting anything on.
Automatic Gate Repair in White Settlement
Automatic gate repair in White Settlement covers anything motorized: swing arms, slide operators, keypads, remotes, safety loops, and photocells. The work here skews different from newer suburbs because so many gates began life as manual chain-link and got automated years later, usually without ever being brought up to modern safety standards. We fix the immediate fault, then flag what would fail a future inspection and what would hurt someone. Basic automatic gate repairs in White Settlement run $180-$500. Keypad replacement runs $95-$185 installed. Remote reprogramming or replacement runs $35-$75 per remote. Safety photocell retrofits run $140-$260.
Entrapment Protection on Older Gates
A gate that has no photo-eyes and no loop detector cannot legally run an operator under UL 325, and it is dangerous to anyone or anything in the swing path. In White Settlement we regularly find operators installed on gates that never had entrapment protection added. We quote the retrofit honestly and do it on the same trip when we can.
Seasonal Faults from Clay Movement
When your operator faults every spring and winter despite nothing visibly broken, the cause is usually the ground under the gate, not the electronics. White Settlement clay heaves with the freeze-thaw cycle and shifts posts enough to throw travel limits off. We correct the limit settings and the post alignment together, because fixing one without the other guarantees a return call.
Trusted Brands We Service in White Settlement
Portcullis Gate Repair services nine major gate-operator brands, and three of the workhorses we see most in White Settlement are FAAC, BFT, and Linear. Our techs arrive already knowing the specific operator on your property, because we stock the common boards, arms, remotes, and capacitors for these systems and a full range for others. That means less waiting on parts and more repair trips completed in one visit. Whether your original opener is a Viking, a Ghost controls unit, or something installed during the Nixon administration, we will tell you straight whether it is worth saving.
Common Electric Gate Repair Problems We See in White Settlement Homes
- Heaved hinge posts. Clay near White Settlement Road and Meadow Park Dr expands and contracts hard enough to lift a 1950s post right out of its collar. The visible latch or hinge failure is almost always downstream of this footing problem.
- Obsolete control boards. Pre-1990s operators lose their logic boards to age and heat, and the boards are no longer made. We tell homeowners when a retrofit or a full swap is the cheaper answer than a recurring repair.
- Corroded 1950s hardware. Original galvanized drop-rod latches and strap hinges on chain-link gates are now 60 to 80 years old. They shear, seize, and strip, and we replace them with heavier hardware on every gate we touch.
- Missing safety protection. Gates hung before modern codes have no photo-eyes and no loop detector. Once an operator is added, the gate fails UL 325, and anyone in the path is at risk. We retrofit entrapment protection on nearly every older White Settlement gate we motorize.
Pricing for Electric Gate Repair in White Settlement, TX
Here are the numbers we quote across White Settlement. A service trip with diagnosis runs $85-$120, credited toward the repair if you proceed. Gate opener repairs run $180-$650. Full operator replacement runs $850-$1,500. Keypad replacement runs $95-$185. Safety photocell retrofit runs $140-$260. Post realignment and refooting runs $280-$700 depending on depth and access. Every quote is in writing before we start, and the Kingswell Guarantee rides with it: 365 days on parts and labor, backed by the 365-Day Done Right Promise. If the repair fails inside that period, we come back and fix it at no charge. Call (940) 412-7340 for an exact quote based on your gate.
We Also Serve Cities Near White Settlement
While this page is for White Settlement homeowners, our same Electric Gate Repair service extends to nearby Fort Worth, plus Dallas, Houston, and San Antonio. Dispatch and scheduling for all of these is coordinated from the Dallas-Fort Worth office, with crews serving White Settlement locally. If you are in Fort Worth or one of the other nearby cities, call the same number: (940) 412-7340.
Serving White Settlement, TX - Our Local Coverage Area
We’re based in the White Settlement area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in White Settlement
The post footing has failed. White Settlement’s Blackland Prairie clay shrinks in summer and swells in winter, and the shallow concrete collars poured in the 1950s crack under that movement. Every few freeze-thaw cycles the post racks out of square again, no matter how many times you tighten the hinge. The fix is pulling the post, digging a proper 24-inch footing, re-plumbing the frame, and repouring. We quote $280-$700 for this in White Settlement depending on post depth and access. Call (940) 412-7340 for a written quote before we touch anything.
Yes, in most cases. The operator is rarely the problem; the post is. We check the original 2-inch galvanized hinge post first, because if the footing is cracked from clay movement, a new FAAC or LiftMaster arm will bind within one freeze-thaw cycle. We quote post refooting separately from the operator retrofit so you see exactly what you are paying for. Total cost for a retrofit on an existing swing gate usually runs $850-$1,500 installed. Call (940) 412-7340 for a free on-site assessment.
Yes, that’s a serious problem. Under UL 325, any automatic gate must have entrapment protection, either photo-eyes or a loop detector. A gate without them can close on a person or pet, and you are liable. This is common on White Settlement gates that were originally manual chain-link and got motorized later without a safety retrofit. Photocell retrofit runs $140-$260, and we do it the same trip whenever possible. Call (940) 412-7340 and we’ll check your gate against current safety requirements.
Because the ground under White Settlement moves. Clay heave shifts the gate posts enough to throw the travel limits off, and the operator reads that as an obstruction or overcurrent and faults. The electronics are often fine. The fix is re-plumbing the posts and resetting travel limits together. In our work around Meadow Park Dr, we have pulled posts heaved 1.5 inches out of their 1950s collars while the operator itself tested clean. Call (940) 412-7340 and we will find the real cause, not just reset the board.
Usually the answer is repair. The original galvanized chain-link frames on White Settlement’s ranch lots are often in better shape than their hardware suggests, and the metal itself survives Texas heat well. What fails is the hardware and the footing. If the gate frame is structurally sound, we replace the hinges, latches, and posts as needed for $280-$700 total. If the frame is rusted through or the post is snapped at the base, a new chain-link gate runs $600-$1,200 installed. We give you both numbers in writing and let you decide. Call (940) 412-7340 for an honest assessment.
Call Portcullis Gate Repair in White Settlement
When your gate is down, call (940) 412-7340. A live person answers around the clock, not a voicemail queue. We give you a real arrival window, a written price before any bolt is turned, and a written Kingswell Guarantee on every repair. If it fails within 365 days, we come back free. That is the Kingswell Way, and that is how we work in White Settlement.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving White Settlement since 2008.





Before
After
Before
After
Before
After