Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across White Settlement
Gate installation in White Settlement usually means one of two jobs: replacing a 60-year-old chain-link gate that’s finally given out, or adding an automatic opener to a drive gate that’s been swung by hand since the Eisenhower administration. Most projects run $900-$4,500 depending on gate size, material, and whether you’re adding automation. We dispatch crews to White Settlement daily from our Dallas-Fort Worth office, and in most cases we can have a technician at your property within 24-48 hours for an estimate. Call (940) 412-7340 and you’ll talk to a live person, not a voicemail tree.
Our Gate Installation team knows what lives behind these fences. White Settlement isn’t a neighborhood of new construction. It’s a post-war defense-worker enclave where the original chain-link perimeter fencing still holds every other lot line. That changes what we quote, what we stock on the truck, and how we set a post.
Why Portcullis Gate Repair Is White Settlement’s Preferred Gate Installation Company
We’ve worked enough 1940s and 1950s ranch homes in White Settlement to know what we’re going to find before we even touch the gate, which is why our Gate Repair - White Settlement team probes every issue thoroughly. Shallow footings. Corroded galvanized frames. Drop-rod latches that haven’t latched since Reagan was in office. The visible problem is rarely the whole story, and that’s exactly why our technicians probe the post base before quoting any work. A gate that “just needs a new hinge” often needs a post pulled and re-poured at a proper depth.
Dean Prescott, who runs our team, has spent years chasing the specific failure patterns of Blackland Prairie clay. When we serve White Settlement, we’re not learning the area. We’re returning to the same soil conditions, the same 1,000-1,400 square foot ranch lots, and the same original chain-link drives we see week after week.
Every job starts with a written price. Before a single bolt is turned, you know exactly what it costs. No gate company sends you a quote after disassembly. We send it before. And every installation carries the 365-Day Done Right Promise: if it fails inside that year, we return and make it right at no charge. That’s written on the invoice, not implied in a handshake.
Gate Opener Installation in White Settlement
Gate Opener Installation in White Settlement often means retrofitting a 1950s chain-link drive gate with a modern automatic operator, which typically runs $1,800-$3,800 including the operator, mounting bracket, safety devices, and labor. The job involves more than bolting on a motor: the gate itself has to be square, the posts have to be plumb and stable, and the operator needs a dedicated power run. In this city, the post work is usually the deciding factor, because half the original footings are only 18 inches deep.
The Operator
We install and service FAAC, BFT, Linear, and Viking operators, among others. The operator is the motorized arm or box that physically pushes and pulls the gate. On a swing gate, that’s an actuator. On a sliding gate, it’s a gear-driven motor mounted on a pad. Older White Settlement properties rarely have conduit or an outlet anywhere near the gate, so we factor in the electrical run upfront.
Safety Edges and Photocells
Any automated gate installed in 2026 has to meet UL 325 entrapment protection standards. That means photocells, safety edges, or both, depending on the gate type. On legacy automatic gates around White Settlement, we frequently find obsolete or missing entrapment protection. The control board won’t pass inspection, and we replace it as part of the retrofit so the gate is actually safe, not just automated.
Gate Fabrication in White Settlement
Gate Fabrication in White Settlement covers custom-built walk gates, drive gates, and double gates sized to the exact opening, and most projects run $900-$3,200 for a fabricated chain-link, tube-steel, or combination gate, installed. When the original 60-inch chain-link walk gate finally corrodes through, no off-the-shelf big-box gate fits the odd openings we see here. The chain-link fabric was cut on site in 1958, and the frame measurements were whatever the original builder had on hand.
Custom Sizing
We measure on site and build to the opening, not to a stock size. That matters on White Settlement’s small lots, where drive gates often sit between a house corner and a fence line with almost no clearance. A stock 10-foot double gate doesn’t fit a 9-foot-4-inch opening, and forcing it means hinges anchored to the wrong part of a post that’s already leaning.
Frame Material
We spec galvanized steel frames for most replacement gates here. White Settlement’s damp winters and 100-degree summers are rough on powder-coated mild steel. Corrosion starts inside the frame tubes where you can’t see it. Galvanized costs more up front, but on a 6-foot-wide gate it adds maybe 15% to the material cost while doubling the realistic life span in North Texas conditions.
Trusted Brands We Service in White Settlement
We stock common parts for FAAC, BFT, and Linear operators on our trucks headed to White Settlement, which means most retrofit jobs don’t stall waiting on a control board to ship from a distributor. If a legacy Viking operator is on its last legs, we’re honest about whether it’s worth repairing or whether the cost of the control board alone pushes you into replacement territory. Nine major gate-operator brands sit in our service training program. When our technician shows up, they already know the specific system bolted to your post.
Common Gate Installation Problems We See in White Settlement Homes
- Posts heaved out of plumb: Blackland Prairie clay expands and contracts hard between wet winters and dry summers, and original 18-inch footings can’t resist that movement. A gate that racked out of square by February usually has a hinge post leaning three or four inches, and the fix is post replacement, not hinge adjustment.
- Breakage at the concrete collar: The original posts on 1950s lots were set in a shallow concrete collar, not a deep footing. Freeze-thaw cycles crack that collar every few years, and the gate starts grinding against the latch side. We probe the base on every quote because the visible symptom misleads people.
- Failed drop-rod latches on chain-link frames: These 60-80 year old gates were built with steel that’s now corroded through at the hinge and latch points. The latch will still look functional, but the rod doesn’t reach the keeper anymore. Temporary fixes don’t hold because the post behind the latch has shifted.
- Missing or obsolete safety devices on legacy openers: A surprising number of automatic gates in White Settlement have been running for decades with no photocell and no safety edge. That’s a UL 325 violation. When we install a new operator, we bring the whole system up to code, not just the motor.
Pricing for Gate Installation in White Settlement, TX
Here are straight ranges for what we quote in White Settlement: replacing a standard chain-link walk gate runs $350-$850 including hinges and latch hardware. A fabricated double drive gate with new posts runs $1,900-$3,200. Adding a gate operator with safety devices and electrical runs from $1,800-$3,800. Pulling and re-setting two corner posts with proper 30-inch footings adds $500-$1,100 depending on access. The single biggest cost factor in this city is post condition, not the gate itself. Every estimate is free, written, and agreed before any work begins. Call (940) 412-7340 for a quote on your specific opening.
We Also Serve Cities Near White Settlement
White Settlement sits inside the Fort Worth ring, and our Gate Installation crews cover the surrounding area as well. We regularly take calls from homeowners in Fort Worth and Dallas, and we run service down to San Antonio and Houston for larger projects. If you’re just outside White Settlement, call (940) 412-7340 and ask if we’re in your area this week.
Serving White Settlement, TX - Our Local Coverage Area
We’re based in the White Settlement area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in White Settlement
Not necessarily. Most of the sagging gates we see in White Settlement are the result of a hinge post that’s heaved out of plumb, not a failed gate frame. If the frame is still structurally intact, we can pull the post, pour a deeper footing, and re-hang the original gate. If the frame itself is corroded through at the hinge points, replacement is the cheaper long-term answer. A new gate runs $350-$850 depending on size. Call (940) 412-7340 and we’ll tell you honestly which path applies.
Usually yes, as long as the gate is square and the hinge post is stable. The job runs $1,800-$3,800 including the operator, safety photocells, and the electrical run. On older chain-link gates, the limiting factor is frame rigidity. Some 1950s gate frames flex enough to confuse a modern operator, and in those cases we recommend fabricating a stiffer replacement gate before mounting the motor. Get a free measure and we’ll walk you through what your specific gate needs.
Your gate posts are sitting in shallow footings on Blackland Prairie clay, which shrinks and swells with the seasons. The original 1950s installations used 18-inch footings. When wet clay expands, it pushes the post. When summer bakes the soil dry, it contracts and the post leans. The only durable fix is pulling the post and pouring a 30-inch minimum footing, and we do that work routinely across White Settlement. Adjusting hinges without addressing the post is temporary by nature.
We install and service FAAC, BFT, Linear, Viking, and five other major brands. On older White Settlement properties, we lean toward Linear and FAAC for chain-link swing gates because their actuators tolerate the small frame flex that’s typical of 60-year-old gates. On heavier dual-panel drive gates, BFT and Viking have solid gear-driven options. The right operator depends on gate weight, swing arc, and the available power source. Call (940) 412-7340 and we’ll spec it from the truck.
If your gate frame is rust-free and only the hardware has failed, retrofit almost always wins. New hinges, latch, and post work usually stay under $700. If the frame tubes are corroded, the material cost to patch them exceeds the cost of new galvanized fabrication, and we’ll tell you that plainly. Standard replacement gate fabrication in White Settlement runs $900-$2,800 installed, depending on opening width. Get a written quote before you commit either way.
We’re on call for White Settlement seven days a week. When you call (940) 412-7340, a person answers. We’ll schedule a free measure, send a background-checked, uniformed technician, and put the price in writing before any work starts. Every job carries the 365-Day Done Right Promise and a written Kingswell Guarantee.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving White Settlement with gate installation and repair since 2008.