Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Garland, TX
We’re Portcullis Gate Repair, an independently owned Kingswell company serving Garland, TX with gate repair, gate installation, and electric gate repair. Garland gates fail in patterns we see every week: clay soil heaving 1970s-era posts out of plumb, ice storms freezing operator gearboxes, and summer heat warping cedar until hinges bind. When you call (940) 412-7340, a live person answers, gives you a real arrival window, and you get a written price before any work starts.
Why Garland Homes Are Different
Garland sits on Blackland Prairie expansive clay, and that single fact drives more gate failures here than anything else. The city’s massive inventory of 1970s to 1990s tract-home subdivisions means thousands of wood gate posts originally sunk in that soil are now simultaneously heaving, leaning, and rotting. The clay swells in spring rains, contracts in summer drought, and after 30 to 40 cycles the post bases have cracked, the hinges are misaligned, and self-closing gates won’t latch.
The eastern edge along Lake Ray Hubbard is a different story. Higher-end custom homes there have ornamental iron and automated driveway gates that face accelerated rust from the lake’s persistent humidity. North Texas ice storms, which hit Garland every 2 to 4 years, deposit heavy ice loads on wood gates and freeze automatic gate operator gearboxes, causing a surge of post-storm calls. Then summer heat regularly above 100°F warps unseasoned cedar and bakes lubricant out of hinges. Garland gates cycle through extreme thermal stress twice a year, and the repairs reflect that.
Our Main Garland Services
The two calls we get most from Garland homeowners are gates that won’t swing or latch properly, and driveway gates that have stopped responding to remotes or keypads. Here’s what each involves in Garland.
Gate Repair in Garland
Most Garland repair calls start as a gate that drags on the ground or won’t latch. In the older neighborhoods west of Shiloh Road and around Oakridge and Firewheel, technicians routinely find gate posts that look plumb at the surface but are rocking in a clay “socket.” The post isn’t rotted through; the clay has released it entirely. That requires full re-setting in concrete rather than a simple hinge adjustment. We diagnose it in person, quote the fix in writing, and stand behind it for 365 days. Gate Repair in Garland
Gate Installation in Garland
A new gate in Garland needs to work with your soil, not against it. We set posts below the shrink-swell zone where the clay moves, using concrete footings sized for the gate’s weight, not just for how the gate looks on day one. That matters more here than in cities with sandier soil, because a shallow-set post in Garland will be leaning by the third summer. We measure, quote, and schedule. Gate Installation in Garland
Electric Gate Repair in Garland
Electric gate failures in Garland usually trace back to one of two local causes: an ice storm that froze the actuator’s gearbox during a cold snap, or a control board that has been cooking in a direct-sun metal cabinet through a 100-degree August afternoon. Our technicians service FAAC, BFT, Linear, and Viking operators, carrying common boards and gear components on the truck so a diagnose-and-fix often happens on the same visit. Electric Gate Repair in Garland
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Garland
We carry service parts on the truck for the operators Garland homeowners have most often: FAAC, BFT, Linear, and Viking. If your gate runs an actuator we stock for, repair is usually handled on the first visit. See our brands for the full list.
Pricing for Gate Company in Garland, TX
| Service | Typical range in Garland |
|---|---|
| Gate not closing or latching (hinge/post alignment) | $150 - $350 |
| Sagging gate correction with anti-sag kit | $175 - $375 |
| Wood gate post re-set in concrete | $250 - $500 per post |
| Driveway gate operator swap (parts and labor) | $650 - $1,250 |
| Control board replacement | $400 - $900 |
| Actuator arm replacement | $550 - $1,100 |
| Safety sensor or photo-eye repair | $175 - $350 |
| Keypad or intercom replacement | $250 - $600 |
| Full new gate installation (single swing, wood) | $1,200 - $2,500 |
| Full new gate installation (ornamental iron, automated) | $3,500 - $8,000 |
In Garland, price gets pushed upward when a post has to be re-set in concrete because the clay has released it, and when an ice storm has scored gear teeth inside the actuator housing. Whatever the number, you see it in writing before a single bolt is turned, and that written price is the price.
Neighborhoods We Serve in Garland
We work across Garland, from the older subdivisions west of Shiloh Road out toward Firewheel and the lakefront homes east of it. Most calls in the central and western parts of town are wood gate post problems. Near Lake Ray Hubbard, it shifts to automated iron gates fighting persistent humidity.
- Oakridge
- Firewheel
- Club Hill
- Springpark
- Chimney Hill
We typically reach most Garland neighborhoods within a 60 to 90 minute window once a truck is dispatched.
Service Area – Cities Near Garland
Our Garland crews also take calls in the surrounding suburbs when schedules allow. If you’re in Sachse, TX, Rowlett, TX, Wylie, TX, or Richardson, TX, same repair standards apply: written price first, real arrival window, and the 365-day guarantee in writing.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Garland
For active gate failures, we usually reach most Garland neighborhoods within 60 to 90 minutes of dispatch. Call (940) 412-7340 and a live person gives you a specific arrival window, not a call center estimate.
Most repairs to existing gates don’t require a permit. New driveway gate installations can trigger a permit depending on setback and height, and HOAs in many Garland subdivisions have their own approval steps. We’ll flag what applies so you’re not surprised later.
No. The price you see in writing before work starts is the price you pay. If the job turns out to be smaller than quoted, we adjust downward. It never goes up after the fact, and every repair carries the 365-Day Done Right Promise on the invoice.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Garland Customers Say
"The opener gave out and we were manually pushing the gate for a week. Portcullis got us in quick, swapped the opener, and set up the remotes for both our cars. Great to have it working again."
- Priscilla Nava"Our driveway gate stopped halfway and wouldn't close, which is a problem when it's the only thing between the street and the yard. They came out same day, replaced the motor, and it's smooth again."
- Leonard Pace"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw