Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Garland
Gate installation in Garland runs $1,800 to $9,500 for most residential jobs in 2026, with a typical driveway swing gate on welded steel posts landing around $3,200 to $5,800 installed. That price includes the gate fabrication, post setting, hanging, and a written warranty before we leave. We’re the Portcullis Gate Repair team, an independently owned Kingswell company, and we’ve been installing gates across Garland since 2008. If you’re near Firewheel, Oakridge, or the Lake Ray Hubbard shore, we know the soil, the heat, and the hardware your gate has to survive. Call (940) 412-7340 for a free measure and written quote.
Why Portcullis Gate Repair Is Garland’s Preferred Gate Installation Company
Garland homeowners call us because we show up when we say we will and the price we quote is the price on the invoice. That’s not marketing. It’s the Kingswell Guarantee, written on every job: a real arrival window, a clean job site, and a written guarantee on the installation. Dean Prescott, our owner, holds every Portcullis technician to the same standard across the DFW metro.
Our crews work Garland every week, from the 1970s tract subdivisions along Broadway and Belt Line to the custom estates east of Shiloh Road. That matters because a gate post set in Garland’s expansive clay behaves differently than one set in sandy loam a few miles north. We dig, set, and weld for the soil we’re actually standing on. Reviews from Garland customers consistently mention two things: the technician arrived in uniform, background-checked, and on time, and the gate still swings true a year later.
We also answer the phone. A live person, 24 hours a day, including holidays. No voicemail tree, no callback queue. When a gate fails or you need a quote for new construction, you reach a human at (940) 412-7340.
Electric Gate Installation in Garland
Electric gate installation in Garland typically runs $4,200 to $9,500 for a complete automated driveway gate, including the operator, safety photocells, keypad or intercom, and wiring run. The actuator, the motorized arm or ram that physically pushes the gate open, accounts for $800 to $2,200 of that depending on whether you choose a FAAC, BFT, Linear, or Viking operator. Most Garland homes on standard 50-foot lots use 1/2-horsepower 120V operators, while larger custom gates near Lake Ray Hubbard often call for 1-horsepower 220V units rated for heavier panels.
Operator Selection and Wiring
For a heavy ornamental iron gate, we recommend a linear-ram or articulated-arm operator with a 220V power supply rather than a light-duty residential swing arm. The actuator needs a dedicated GFCI-protected circuit, and we run conduit below grade rather than leaving Romex exposed to North Texas freeze-thaw cycles. Every installation includes safety photocells at both the vehicle and pedestrian height, tested before we leave.
Underground Operators for Custom Gates
On high-end Garland properties where a visible operator box would spoil the sightline, we install underground operators. The motor sits in a sealed vault below the gate hinge, and the only visible hardware is the hinge itself. It’s a more invasive installation, with a $1,500 to $3,000 upcharge over an above-ground arm, but it’s the quietest option and it keeps the operator out of Garland’s summer heat, which prolongs its life.
Driveway Gate Installation in Garland
Driveway gate installation in Garland covers everything from a simple single-swing wood gate matching your cedar privacy fence to a custom double-swing ornamental iron gate across a 24-foot drive. A basic welded steel frame with cedar infill on a single drive runs $1,800 to $3,400. Custom ornamental iron double gates, fabricated to match your existing fence scrollwork, run $5,500 to $9,500 installed. That includes the post footings, hinges, latch or magnetic lock, and adjustments.
Post Setting in Expansive Clay
Garland sits on Blackland Prairie clay that swells when it rains and shrinks when it doesn’t. A driveway gate post set with a thin concrete collar will lean within three to five years. We drill and set posts 36 to 42 inches deep, using a full concrete footing below the frost and clay movement line, then backfill with compacted road base. It costs more than the 18-inch hole some handymen dig, and it’s the reason our gates still latch five years later.
Heavy Gate Fabrication and Hinges
A 16-foot ornamental iron gate panel can weigh 600 to 900 pounds. We use 2-inch square steel tubing for the frame rather than 14-gauge lighter stock, and we weld a full mid-rail into the design to resist sagging. Hinges get greaseable ball bearings or pillow-block bearings, not decorative straps, because Garland’s 100°F summers bake lubricant out of anything exposed.
Trusted Brands We Service in Garland
We train our Garland technicians on nine major gate-operator brands, and we carry common replacement parts in our DFW dispatch truck so a service call doesn’t end with “we’ll order it.” For Garland installations, the brands we quote most often are FAAC, BFT, Linear, and Viking, because they hold up under the specific strain of North Texas temperature swings and our technician teams know their programming and failure points inside out. When we install a LiftMaster for a homeowner near Firewheel, we’re not reading the manual on site. We already know that system. That’s the difference between a crew that installs gates and a crew that stands behind them for 365 days.
Common Gate Installation Problems We See in Garland Homes
- Clay socket post rocking: In the older neighborhoods west of Shiloh Road, we routinely find gate posts that look plumb at the surface but rock in a clay socket. The post isn’t rotted. The clay has simply released it. It needs a full re-set in concrete, not a hinge adjustment.
- Lake humidity rust on ornamental iron: Homes within a mile or two of Lake Ray Hubbard get persistent moisture that accelerates rust on wrought-look gates and gate hardware. We see binding hinges and strained operators on gates that would be fine 10 miles inland.
- Unseasoned cedar warping: Garland’s summer heat regularly tops 100°F, and cedar gates built with wet or unseasoned wood warp within two summers. That’s why we quote kiln-dried cedar or steel frames with cedar infill rather than solid cedar panels for most driveway gates.
- Undersized operators on heavy custom gates: We frequently replace operators installed by other companies that were sized for a light wood gate but mounted to a 700-pound ornamental iron panel. The motor burns out, the gearbox strips, and the homeowner pays twice. We size the operator to the actual gate weight, measured on site.
Pricing for Gate Installation in Garland, TX
Here are real ranges for Garland, not vague estimates. A single-swing wood driveway gate on new steel posts runs $1,800 to $3,400. A double-swing ornamental iron driveway gate across a 20- to 24-foot opening runs $5,500 to $9,500. A complete electric gate system with a FAAC, BFT, or Linear operator, photocells, keypad, and conduit run lands between $4,200 and $9,500. Underground operators add $1,500 to $3,000. Every quote is written, itemized, and agreed before any work starts. You’ll never open an invoice for a number you didn’t see first. Call (940) 412-7340 for a free measure, and we’ll hand you a price on the spot.
We Also Serve Cities Near Garland
Our Gate Installation in Garland crews also serve Sachse, Rowlett, Wylie, and Richardson. If you’re a few minutes outside city limits, we still quote the same written-price standard. Our Gate Installation team covers the whole northeast Dallas County corridor.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Garland
Because the post is likely rocking in a clay socket below the surface. Garland’s Blackland Prairie soil swells in spring rains and contracts in summer drought, and after 30 or 40 cycles, the clay releases its grip on the post. The post itself may not be rotted at all. The fix is to pull the post, drill a deeper hole, and re-set it in a full concrete footing that extends below the active clay movement zone. A hinge adjustment won’t solve it because the hinge isn’t the problem, the footing is. Call (940) 412-7340 and we’ll check it with a level and a pry test, not a guess over the phone.
The persistent moisture near the lake accelerates rust on ornamental iron gates and especially on hinges, latch hardware, and operator mounting brackets. We see gates within a mile or two of the shoreline corroding two to three times faster than identical gates in central Garland. The remedy is a marine-grade primer and two-part epoxy topcoat on all fabricated steel, plus stainless or galvanized hardware throughout. We specify these materials on every Lake Ray Hubbard-area installation as standard, not an upsell.
For a heavy ornamental iron gate over 400 pounds, a 1-horsepower 220V linear-ram or articulated-arm operator from FAAC, BFT, or Viking is the right call. Light-duty residential operators rated for wood gates will strain, burn through capacitors, and eventually strip the internal gearbox. The operator’s duty cycle matters too: Garland’s heat means the motor runs hot, so we specify units rated for at least 50 cycles per day on any gate that opens more than a few times daily. Call (940) 412-7340 and we’ll spec the exact model for your gate’s measured weight.
Test them monthly. Walk toward the closing gate and verify it reverses or stops before contact. Garland’s dust and pollen, especially during spring and early summer, coat the photocell lenses and reduce their range. Wipe the lenses with a dry cloth and re-test. If the gate fails to reverse, shut off the operator at the disconnect switch and call us. A photocell that’s misaligned or dirty is the leading cause of entrapment incidents on residential gates, and it takes two minutes to check.
It can, but with caveats. Garland gets plenty of sun, but our ice storms coat panels in frozen glaze every two to four years and our summer heat reduces battery efficiency. A solar operator needs a battery bank sized for at least three cloudy days and a panel angled to shed ice. For most Garland driveway gates that see daily use, we recommend a hardwired 120V or 220V operator with a battery backup rather than solar-only. Solar works well for remote or low-use pedestrian gates, but a driveway gate that opens 20 times a day will outrun a solar-only system within a year. We install both, and we’ll give you an honest recommendation based on your actual usage.
Ready for a written quote? Call (940) 412-7340. Dean Prescott and the Portcullis team serve Garland with background-checked, uniformed technicians, a live person on the phone around the clock, and the 365-Day Done Right Promise in writing on every installation. Free measure, free estimate, no surprises.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Garland with written-price gate installation since 2008.