Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Bee Cave
A new driveway gate in Bee Cave runs $4,800 to $14,500 installed, depending on the gate style, operator brand, and what’s happening with the ground under your posts. Most swing gate installations take two to three days on site, including the concrete work and operator wiring. If your current gate has failed or you’re building new on a Hill Country lot, we’ll give you a written price before any work starts, and we’ll honor it.
Portcullis Gate Repair is a Kingswell company, and every Gate Installation in Bee Cave carries the same four promises: a written price, a real arrival window, a clean job site, and a written guarantee. Call (940) 412-7340 and a live person answers, day or night.
Why Portcullis Gate Repair Is Bee Cave’s Preferred Gate Installation Company
Dean Prescott leads our crews across Bee Cave, and he’s walked enough of these properties to know what the ground does here. That matters more than most homeowners expect. The limestone under Bee Cave looks solid, but it drains unevenly, and the same lot can have a dry post footing at the street and a saturated one forty feet down the driveway. Our installs account for that from the first day, not the first failure.
We’ve installed gates in Falconhead, Lake Pointe, and the gated communities along Hamilton Pool Road. Each job starts the same way: we look at the soil, the slope, the wind exposure, and the operator brand already on the property, then we write down a price. No verbal estimate, no door-knock inflation. The Kingswell Guarantee goes on every invoice, and it covers the full install for 365 days. If something’s not right within that window, we return and fix it at no charge under the 365-Day Done Right Promise.
Our technicians are background-checked, uniformed, and trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. When the truck pulls up in Bee Cave, you know who’s getting out.
Driveway Gate Installation in Bee Cave
Driveway gate installation in Bee Cave usually means replacing hardware that was installed between 2003 and 2018, the boom years for estate construction here. A standard steel or wrought iron single swing gate with a new operator and keypad entry runs $4,800 to $8,200. A double swing gate on a wider drive with stone columns runs $9,000 to $14,500. We quote exactly what we’ll do, in writing, before the first bolt comes off the old gate.
Post Footings and Hill Country Ground
On lots backing up to the Barton Creek greenbelt or along Hamilton Pool Road, live oak roots heave post footings within eight to twelve years. That’s a Bee Cave signature problem, and it means our installs start with the hole, not the hardware. Where the original post shifted, we set a deeper limestone-founded footing so the new gate doesn’t inherit the old one’s lean.
Operator and Entry Systems
Most homeowners want a keypad and a vehicle exit loop, and we wire those in as part of the install. If you’re replacing an older LiftMaster or Elite operator, we’ll match the new one to your existing remote system or upgrade the whole setup. The operator is the motorized arm that swings the gate; the loop detector is the sensor in the pavement that tells it when a car has cleared. Both are included in our written quote.
Sliding Gate Installation in Bee Cave
Sliding gate installation in Bee Cave works well for long driveways and for lots where a swing gate would arc out over a slope or a drainage swale. A new steel slide gate with a rack-driven operator runs $6,400 to $12,800, including concrete work and safety edges. Slide gates need a clean, level track line, and on Bee Cave’s terrain that can mean more site preparation than a swing gate requires.
Where Flash Flood Alley Meets Your Operator
Operators set in low-lying driveway aprons or near drainage swales take on water during Bee Cave storms. We’ve replaced enough flooded control boards to know where not to put the new one. On a slide gate install, we set the operator housing above the apron’s water line and seal the wiring entry points. That single decision adds years to the life of the unit.
Track, Limestone, and Oak Roots
Slide gate tracks need a stable base. On Hill Country lots the topsoil is thin and the limestone is irregular, so we pour a reinforced concrete track pad rather than bolting to whatever is there. Along the greenbelt corridors, we also check for root growth pushing against the track line, because a slide gate that runs true in January can bind by June if the roots are still active.
Trusted Brands We Service in Bee Cave
Most Bee Cave gates run on LiftMaster or Elite operators, but we also service and install Linear, Viking, Ghost Controls, and DoorKing systems. Because the local housing stock all hit the market around the same time, our crews keep a deep stock of common parts for these brands on the trucks. That means fewer return trips and less waiting for a part to ship. Whether you’re replacing an operator on an existing gate or starting fresh, we’ll wire and program the brand you already know, or recommend one that matches your gate’s weight and duty cycle.
Common Gate Installation Problems We See in Bee Cave Homes
- Wind load on solid infill gates. Hilltop and canyon-edge lots catch Hill Country wind that bows the frame and torques the hinge post. Sag correction alone won’t fix this; the post and footing have to be addressed first, and we build for wind from the first day.
- Flooded operators in driveway aprons. Bee Cave sits in flash flood alley, and low-lying operators burn out control boards when water gets into the housing. Our installs position the operator above the water line or move the unit entirely when the grade demands it.
- Live oak root heave on greenbelt lots. Properties near the Barton Creek corridor and Hamilton Pool Road see post footings shift within a decade. We set deeper, rebar-reinforced footings and account for the root pattern before pouring.
- First-generation hardware aging out together. The 2003-2018 buildout means thousands of LiftMaster and Elite operators are failing in the same window. An install quote here is a decision about the next fifteen years of hardware, not a patch job on the last fifteen.
Pricing for Gate Installation in Bee Cave, TX
Here’s what to expect in Bee Cave’s market. A single swing gate with a basic operator runs $4,800 to $8,200. A double swing gate with stone columns runs $9,000 to $14,500. A slide gate with a rack-driven operator runs $6,400 to $12,800. If your project includes a new operator, keypad, loop detector, and safety edges, those are always itemized in the written quote. The price you get before we start is the price you pay when we finish. Call (940) 412-7340 for a free estimate, and we’ll explain exactly where your money goes.
We Also Serve Cities Near Bee Cave
Our crews serve Bee Cave and the surrounding region, including Houston, San Antonio, Dallas, and Fort Worth. If your property is outside the immediate Bee Cave area but you need the same Kingswell Guarantee, call us and we’ll confirm coverage.
Serving Bee Cave, TX - Our Local Coverage Area
We’re based in the Bee Cave area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Bee Cave
Wind load is the biggest difference. On hilltop and canyon-edge lots, solid infill gates act like sails, and that force transfers to the hinge post and footing. We size the post, the footing depth, and the gate frame steel for Bee Cave wind exposure, not for a sheltered suburban side street. The operator also gets a wind-load rating that matches the gate’s surface area. Call (940) 412-7340 and we’ll walk your specific lot.
Every automatic gate has a manual release mechanism, usually a handle or keyed lock on the operator housing that disengages the motor so you can push the gate open by hand. On new installs, we show you exactly where it is and how to use it, and we label the release so you can find it in the dark. If you’re not sure where yours is, call us and we’ll talk you through it over the phone.
Because they were all built around the same time. Bee Cave’s estate construction boom ran from roughly 2003 to 2018, and that wave of gates all share the same era of LiftMaster and Elite hardware. Operators and hinges from that period are now reaching first-generation failure together, which is why you see so many repair trucks in the same neighborhoods in the same week. A replacement now should be chosen for the next fifteen years, not the next fifteen months.
Yes, and you should consider it. Slide gates keep the operator and track above the apron’s water line, which protects the control board from the flash flood alley conditions Bee Cave gets during heavy rains. We pour a reinforced concrete track pad and set the operator housing high enough to stay dry. If your existing swing gate sits in a swale, a slide gate conversion is often the better long-term fix.
Yes, every install includes entrapment protection: photo eyes that stop the gate if anything breaks the beam, safety edges that reverse on contact, and proper force settings on the operator. This is a safety requirement under UL 325, and it’s not optional on a job we’ll put our name on. Your written quote will list each safety device, and we’ll demonstrate them before we leave.
We’re Portcullis Gate Repair, and we’ve been operating as a Kingswell company since 2008. Every gate we install in Bee Cave carries the 365-Day Done Right Promise and a written Kingswell Guarantee. If it’s not done right, we make it right. Call (940) 412-7340 for a free estimate, and you’ll get a live person who can schedule your visit and give you a straight answer.
Written by Dean Prescott, Owner of Portcullis Gate Repair, serving Bee Cave and the surrounding Hill Country.