Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Burbank
Gate installation in Burbank typically runs $2,800 to $9,500 for a complete automatic driveway gate system, and most installations are completed in one to two days once materials are on site. We’re the Gate Installation team from Portcullis Gate Repair, and we work throughout Burbank from the Rancho district up through the Verdugo foothills. If your gate has failed, or you’re planning a new one, call (940) 412-7340 and we’ll give you a written price before any work starts.
Why Portcullis Gate Repair Is Burbank’s Preferred Gate Installation Company
Gate Repair - Burbank has been our focus since Portcullis became a Kingswell company in 2008, and every job here is bound by the same four Kingswell Guarantee promises: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on the repair. That’s not a marketing line. It’s printed on every invoice.
Dean Prescott leads our team, and our technicians arrive in uniform, background-checked, and already familiar with the operator on your gate. Burbank homeowners tend to know their equipment. We get calls from people who ask for a Viking or a FAAC by name because they’ve seen them on studio lots. That’s a good thing. It means we skip the vague explanations and talk specs.
We answer the phone with a live person 24 hours a day, seven days a week. No voicemail trees. When you call about a failed gate operator during a 104°F Valley afternoon in Burbank, you get a person, a window, and a price. Not a callback queue.
Electric Gate Installation in Burbank
Electric gate installation in Burbank means mounting an operator, running power and safety circuits, and setting travel limits, force settings, and photocells so the gate opens and closes without binding on a hot afternoon. Because Burbank sits on the floor of the San Fernando Valley and routinely hits 100°F and above, we specify operators rated for high-cycle heat exposure and position control boards away from direct sun where the installation layout allows it. A swing-gate operator installation in Burbank typically runs $1,200 to $3,800 including the motor, labor, and safety hardware.
Operator and Safety Hardware
Every automatic gate we install gets the full safety treatment required under UL 325: monitored photocells, force settings dialed to the specific gate weight, and audible warning where required. We don’t do “motor only” jobs that leave the safety edges disconnected. If a gate pinches a child or a pet, the operator alone won’t stop it. That’s the safety gear’s job, and it’s not optional.
Brands and Boards
Burbank’s media-corridor homeowners often request commercial-grade operators by name. LiftMaster, FAAC, and Viking are the three we install most frequently for residential driveway gates here, because they’re the same units running thousands of cycles a month on studio perimeters along Olive Avenue and Alameda. A homeowner on a hillside street near the Verdugos gets the same board and motor as a studio access gate, just sized for their panel.
Driveway Gate Installation in Burbank
Driveway gate installation in Burbank usually means replacing a 1950s or 1960s original wrought-iron swing gate that has corroded through at the hinge post, or adding a slide gate to a wider opening on a larger parcel in the Rancho district. A new steel driveway gate with an automatic operator typically runs $3,500 to $7,800 installed. A simple ornamental steel panel without automation starts around $2,200.
Swing Gate Replacements on Older Burbank Homes
The post-WWII ranch blocks between Olive Avenue and Glenoaks hold a surprising number of original iron swing gates still hanging on original posts. The panel often looks salvageable, but the post has rusted through below grade. If we hang a new panel on a rotted post, we’ll be back in a year. We pull the old post, pour a proper footing, set a galvanized steel post, and then hang the gate so it swings clean for decades.
Slide Gates for Hillside and Wide Openings
On hillside lots near the Verdugo Mountains, or on larger Rancho parcels, slide gates work better than swing gates because they don’t need swing clearance on a sloped driveway. We install rack-and-pinion slide systems with steel track rated for Burbank’s heat expansion. Aluminum track bends too easily in Santa Ana wind events on exposed hillsides, so we spec heavier steel on those jobs.
Trusted Brands We Service in Burbank
Our technicians are trained on nine major gate-operator brands, including Viking, Ghost Controls, and DoorKing. We keep common control boards, remotes, and safety photocells on the truck so most Burbank repair calls finish in a single visit. When a homeowner near the Disney campus asks for a FAAC by name, our tech knows the programming sequence without flipping through a manual. That speed matters when your gate is stuck open at 6 a.m. and you need to get to work.
Common Gate Installation Problems We See in Burbank Homes
- Corroded hinge posts on original 1950s wrought-iron swing gates. The panel looks fine but the post has rusted through below grade. Santa Ana gusts finish the job and shear the post off, leaving the gate dragging on the driveway.
- Operator boards cooked by Valley heat. Burbank’s summer temperatures run 10 to 15 degrees above coastal LA, and control boards mounted in direct sun fail mid-summer, not mid-winter. We reposition boards and specify heat-rated housings.
- Slide-gate tracks binding in the heat. Metal expands when it’s 100°F. A track that ran smooth in March can bind and stall the operator in August. We install expansion-tolerant track systems on every Burbank slide gate.
- Bent aluminum track on hillside-exposed properties. Homes that face open hillside near the Verdugos catch the full force of fall Santa Ana winds. Aluminum track bends under that load. We replace it with steel.
Pricing for Gate Installation in Burbank, CA
A basic ornamental steel driveway gate without automation runs $2,200 to $3,800 installed. A full automatic swing gate system with operator, safety sensors, and remotes runs $3,500 to $7,800. Slide gate systems with steel track and a rack-and-pinion drive run $4,500 to $9,500 depending on gate length and hillside work. Pedestrian gates with a keypad or intercom run $1,800 to $4,200.
The price you get from us is the price on the invoice. It’s written before we turn a bolt. That’s a Kingswell Guarantee requirement, not a courtesy. Call (940) 412-7340 and we’ll measure, spec, and hand you a written quote.
We Also Serve Cities Near Burbank
Beyond Gate Installation in Burbank, our crews work Glendale, West Hollywood, Altadena, and Beverly Hills. Same Kingswell Guarantee, same written price, same live person answering the phone. If you’re across the city line, we’re still your local crew.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Burbank
If your driveway is flat and the gate posts are sound or being replaced anyway, a swing gate is usually the simpler and less expensive option, typically $3,500 to $5,500. If the driveway slopes or you’re short on swing clearance, a slide gate with steel track runs $4,500 to $7,800. Call (940) 412-7340 and we’ll tell you which one fits your lot.
Burbank sits on the Valley floor and reliably hits 100°F or more in summer, which overheats control boards and degrades capacitors faster than coastal temperatures. We see the most operator failures in July and August. Keeping the board out of direct sun and specifying a heat-rated enclosure extends life significantly.
For structural posts and slide track, we use galvanized steel every time. Painted steel looks fine for a year and then rusts through at the weld points. For gate panels, we use powder-coated steel with stainless fasteners. Galvanized post, powder-coated panel, stainless hardware: that’s the combination that survives Burbank’s heat and the occasional salt-tinged air that drifts in from the coast.
UL 325 compliance means monitored photocells at the entrapment zones, force settings limited to the specific gate weight, and a functioning audible alarm or strobe where required. Every automatic gate we install meets those requirements and we test them before we leave. Call (940) 412-7340 for a free estimate.
Solar can work, but it depends on the orientation. A south-facing panel with clear exposure will run a swing gate fine. A shaded north slope near the Verdugos won’t. We’ll assess your sun exposure and panel position before recommending solar. The estimate is free.
Call Portcullis Gate Repair for Gate Installation in Burbank
When a gate fails, you want a person on the phone and a written price before the truck arrives. That’s what we do. Portcullis Gate Repair is an independently owned Kingswell company, and every job carries the 365-Day Done Right Promise: if it’s not done right, we come back and make it right at no charge. Call (940) 412-7340 today for a free estimate on gate installation in Burbank. Dean Prescott and the team will take your call.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Burbank with the Kingswell Guarantee since 2008.