Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Paterson
Gate installation in Paterson runs $1,900 to $7,500 for most residential work, with automatic swing gates on the higher end. That’s the real range we quote before anyone picks up a tool. We’ve installed gates on the tight alley lots off Market Street, along the low blocks near the Passaic, and up the hill past Eastside Park. If you’re looking at a driveway that slopes, a shared alley that floods, or a wrought-iron gate from the 1920s that finally gave out, we’ve seen it in Paterson. Call (940) 412-7340 for a written price.
We’re Portcullis Gate Repair, an independently owned Kingswell company serving Paterson and the surrounding area. Our Gate Installation crew coordinates from the brand’s New York City office, but the technicians who show up at your door are local teams who know Paterson’s streets, its rowhouses, and what the Passaic River does to a gate post. Every job starts with a written price. Every job ends with a written guarantee.
Why Portcullis Gate Repair Is Paterson’s Preferred Gate Installation Company
Paterson homeowners have been burned by gate companies. A tech who never shows. A quote that doubles at the door. A repair that fails six weeks later. The Kingswell Guarantee exists because of exactly that. We give you the price in writing before any work starts. We show up inside the window we committed to. We leave the job site cleaner than we found it. And every installation carries a written guarantee stamped on the invoice. If it fails inside 365 days, we come back and fix it at no charge. That’s the 365-Day Done Right Promise, and it’s not a marketing line. It’s the Kingswell Way: say the price before the work; show up in the window we gave; leave the place cleaner; put the guarantee in writing; come back if it fails.
Dean Prescott, who leads Portcullis Gate Repair, set that standard for a reason. He knows Paterson customers don’t want a gate that sags come spring. They want a known price, a background-checked technician in uniform, and a gate that still opens square a year later. That’s what the Kingswell Guarantee delivers, and it’s why our Paterson callbacks keep ending in referrals from one rowhouse neighbor to the next.
When you call, a live person answers. Not a voicemail tree. Not a callback queue. That’s true 24 hours a day, 7 days a week, including holidays. If a gate is stuck closed at 10 p.m. in the 4th Ward, you should be able to reach someone who can help.
Gate Fabrication in Paterson
Gate fabrication in Paterson usually means cutting and welding a gate to fit a space no off-the-shelf panel was ever designed for. That’s the case on nearly every side-alley and shared-driveway lot in the city’s older wards. The opening between two rowhouses might be 7 feet 4 inches, not 8 feet. The grade might drop an inch per foot toward the street. A catalog gate won’t address any of that. A fabricated gate does, because it’s measured, cut, and welded for that exact opening, that exact slope, and that exact type of use.
Custom alley and shared-driveway gates
Many Paterson two- and three-family homes share a narrow driveway that runs between buildings or along a property line. That gate is often original equipment from the 1920s or 1930s: welded angle iron, a rusted-in-place hinge, maybe a padlock hasp that’s been painted over ten times. When that gate fails, it usually fails at the bottom rail weld, exactly where decades of rain splash and the occasional Passaic flood take their toll. Replacing it means fabricating a panel to the actual opening width, setting new posts plumb, and welding fresh hardware that won’t seize inside two seasons. Most single-panel alley gates of this type run $1,900 to $3,800, fabricated and installed.
Wrought iron restoration and replacement
Original wrought iron is worth keeping where it’s structurally sound. But in Paterson, we more often find a gate that looks intact from ten feet away and is barely holding together at the welds. The bottom rail corrodes from the inside, the hinge barrels wear oval, and the latch stile sags until the gate drags a groove in the concrete. When the rail is gone, patching buys a year, not a decade. A replacement fabricated from new steel, matched to the original picket spacing, runs $2,400 to $5,200 depending on height and ornament. We can often reuse the original posts if they’re set in sound concrete.
Automatic Gate Installation in Paterson
Automatic gate installation in Paterson means adding a motorized operator to a gate that opens and closes on its own, with the safety equipment state code requires. On a city lot where you back out onto a sidewalk or a busy street, the operator spares you from getting in and out of the car twice a day, but it also adds a set of moving parts that have to survive Paterson’s specific weather: hard winter freeze-thaw cycling, summer humidity, and the flood risk along the Passaic. We set the pricing by gate type, operator brand, and the ground the posts sit in.
Swing gate operators
A swing gate operator is the underground or surface-mounted motorized arm that swings a gate open. In Paterson, the most common request is a single swing gate on a side driveway, paired with a keypad and a photocell. Typical automatic swing gate installation runs $4,200 to $7,500, including the operator, posts, safety edges, and programming. On a two-family with a shared driveway, we can program each unit its own code.
Slide gate operators
A slide gate is what its name says: it slides on a track instead of swinging. On a narrow Paterson lot, a slide gate can be the right answer when there’s no room for a swing arc to clear a walkway or a wall. But slide tracks in Paterson need real attention to drainage. If the track sits in a low spot that puddles or floods, the rollers and rack gears take a beating. Slide gate automation typically runs $5,000 to $8,000 in Paterson, depending on gate weight and track prep.
Trusted Brands We Service in Paterson
When we install a gate operator in Paterson, it’s usually a Viking, Ghost Controls, or DoorKing, because that’s what most Paterson gate panels are built or retrofitted for. We stock common parts for those brands at local supply points near Paterson, which saves the “waiting on a part” problem that stretches some gate jobs into two weeks. If your current gate has an Elite or another brand operator, our technicians show up already knowing the wiring and programming for that specific unit. We don’t send a generalist to figure your gate out on your curb.
Common Gate Installation Problems We See in Paterson Homes
- Footings heave and tilt after Passaic River saturation. When floodwater soaks the ground around a gate post and then recedes, the footing can shift and tip, throwing the latch off alignment. A gate that closed square in October won’t even catch by March.
- Bottom rail welds rust through after prolonged submersion. The low blocks along the Passaic see gates stand in water long enough to eat the bottom rail from the inside out. The panel then hangs from the hinge post alone until it folds.
- Silt and freeze-thaw seize hinges and slide tracks solid. Flood silt packs into hinge barrels, then a Paterson hard freeze locks it in place. On automatic slide gates, that same silt strips the rack-and-pinion gears the first time the operator tries to move.
- Deferred maintenance on multi-family gates leaves no safe repair window. Two- and three-family ownership means a gate gets ignored until it fails completely. By the time anyone calls, the posts are out of plumb and the panel needs remounting, not adjusting.
Pricing for Gate Installation in Paterson, NJ
Here are the ranges we quote most often in Paterson. A single fabricated alley gate runs $1,900 to $3,800. Wrought-iron replacement runs $2,400 to $5,200. A full automatic swing gate installation runs $4,200 to $7,500. An automatic slide gate runs $5,000 to $8,000. What moves the number: ground condition (flood-prone soils need deeper, wider footings), gate width and weight, operator brand, and how much old hardware has to be cut out. The price is always quoted and agreed before any work starts. Call (940) 412-7340 and we’ll put it in writing, free.
We Also Serve Cities Near Paterson
Portcullis Gate Repair covers Gate Installation in Paterson and the surrounding Passaic and Bergen county corridor. That includes North Bergen, Union City, Newark, and Jersey City. If you’re just over a city line, call the same number and ask for Dean’s team. We schedule Paterson-area work daily.
Serving Paterson, NJ - Our Local Coverage Area
We’re based in the Paterson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Paterson
Yes. The practical answer is a deeper post footing set below the scour line, a bottom rail raised a few inches off grade where clearance allows, and stainless or hot-dipped galvanized hardware at every hinge, latch, and operator mount point. We also specify flood-aware drainage around slide tracks. A gate built this way in Paterson’s flood-prone wards will not need a new footing after the next high-water event. Call (940) 412-7340 for a written quote on a flood-ready gate.
Every automatic gate operator we install includes a manual release so the gate can be moved by hand when the power is out. On most residential units there’s a pull handle or keyed release at the operator. Pull it, and the gate disengages from the motor so you can push it open. If your gate has a maglock rather than a mechanical latch, that may also need a battery backup or a manual key release. We show every Paterson customer how to use the release at the time of installation.
Usually both, in order. The post has gone out of plumb from a heaving footing, and the bottom rail has rusted through enough that the panel sags under its own weight. You can tell which came first: if the post is visibly leaning, the footing has shifted. If the post is plumb but the gate still drags, the rail weld has failed. Either way, the fix is a new footing, a new rail, or a new panel. A replacement fabricated panel for a Paterson alley gate runs $2,400 to $5,200, including post reset.
Yes, and this is the one thing you should never skip. Photo-eyes at the operator level and edge sensors on the gate leaf are standard equipment on every automatic gate we install in Paterson. They stop the gate if a person, child, or car is in the swing path. Paterson code enforcement and your insurance carrier both expect them. We install them on every automatic job, no exceptions.
Yes. A flooded hasp that has to be cut off is a routine part of post-flood gate work in Paterson’s low wards. When we install a new gate, the hasp and latch are replaced with corrosion-resistant hardware, and on automatic gates the keypad or remote takes over most locking duty. No more standing in the rain with a frozen padlock. Call (940) 412-7340 for a free estimate.
Call Portcullis Gate Repair for Gate Installation in Paterson
If you live in Paterson and your gate is sagging, seized, flood-damaged, or just gone, call Dean and the team at (940) 412-7340. We’ll give you a written price before any work starts, show up in the window we gave you, and back the work with the 365-Day Done Right Promise. No after-the-fact surprises. No gate that fails by spring. Just a Kingswell company doing the job the Kingswell way.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Paterson since 2008.