Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Paterson, NJ
Gate repair in Paterson, NJ usually means working on hardware that has survived a century of weather, deferred maintenance, and more than a few Passaic River floods. Most of the gates we fix here hang on late-19th and early-20th century rowhouses, where the side-alley gate is standard equipment and the original ironwork is often still in place. Paterson jobs are different because the city’s low-lying wards flood regularly, and those repeated soakings destroy welds, seize hinges, and throw post footings out of alignment in ways that upland Passaic County towns rarely experience. Call (940) 412-7340 and you’ll reach a live person who can walk you through what’s happening with your gate.
Why Paterson Homes Are Different
Paterson’s housing stock is overwhelmingly attached two- and three-family homes built between roughly 1890 and 1940. These are tight-lot rowhouses where the side-alley gate and shared-driveway gate are fixtures as predictable as the front stoop. Many of those gates are original wrought iron or early tubular steel, which means the welds at the bottom rail have been rusting since before color television. When we open one up, we’re typically looking at hardware no one has replaced since the house changed hands three owners ago.
The Passaic River makes things harder. Low-lying sections of Paterson flood on a near-cyclical basis, and when the water recedes it leaves gate posts that have been submerged long enough to destroy bottom-rail welds, pack the hinges with silt, and shift concrete footings. Then northern New Jersey’s freeze-thaw cycle does its seasonal work on those already-weakened footings, tilting posts and knocking latch alignment out every spring. Multi-family ownership compounds this: with tenants coming and going, gate repairs get deferred until a latch or hinge fails outright. We plan for neglected hardware the way other towns plan for routine servicing.
Our Main Paterson Services
Most Paterson homeowners and building owners call us for two things: a gate that won’t swing or latch, and an operator system that has stopped responding. Here’s what each involves in this city.
Gate Repair in Paterson
This is the call we get after a hinge tears loose from a brick pier, a bottom rail rusts through at ground level, or a gate that once latched quietly starts dragging against the pavement. In Paterson, post-flood repair is a routine part of this work: we cut off corroded padlock hasps, re-square tilted posts, and replace hardware that’s been sitting in river silt. Our technicians arrive with the actuator and hinge stock already on the truck, and you get a written price before any work starts. See Gate Repair in Paterson for the full breakdown.
Gate Installation in Paterson
New gate installation in Paterson usually means working around an existing masonry opening that was never quite square, or retrofitting a modern gate onto piers that have settled over ninety years. We measure first, quote in writing, and then order the gate and the operator together so they arrive matched. For flood-prone streets near the river, we often recommend stainless or powder-coated hardware and footings set deeper than what the original installers poured. See Gate Installation in Paterson for what’s included.
Electric Gate Repair in Paterson
Electric gate systems fail here in predictable ways: the control board shorts after a damp spring, the safety edges stop reversing, or the actuator arm burns out because the gate was binding against a shifted post. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, and our techs arrive already knowing which operator is on the property. Wiring in old Paterson rowhouses often runs through shared walls and side alleys, so diagnosis takes patience. See Electric Gate Repair in Paterson for details.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Paterson
We carry parts and stock service knowledge for FAAC, BFT, Linear, and Viking systems, among others, and keep common control boards and safety edges on hand locally. Most operator repairs in Paterson are diagnosed and quoted the same visit. See our brands for the full list.
Pricing for Gate Company in Paterson, NJ
| Service | Typical range in Paterson |
|---|---|
| Swing gate actuator swap (parts and labor) | $450-$900 |
| Slide gate motor replacement | $600-$1,200 |
| Control board replacement | $350-$700 |
| Safety edge or photo-eye replacement | $200-$400 per edge |
| New swing gate actuator installation | $900-$1,800 |
| Hinge replacement on iron gate (welded) | $250-$600 per pair |
| Bottom rail rust repair and re-weld | $200-$500 |
| Post re-setting after flood heave | $400-$900 per post |
| Full gate installation (single swing, standard) | $2,500-$5,500 |
| Full electric gate installation with operator | $4,000-$9,000+ |
What pushes price up in Paterson is usually the age of the structure: a post that has to be dug out of a 1920s concrete footer costs more than one set in fresh gravel. Flood damage adds the same pressure. Whatever the job, you get the price in writing before a single bolt is turned, and that number does not change at the door.
Neighborhoods We Serve in Paterson
We cover all of Paterson, from the river wards to the hill sections and everything between. Our technicians know the difference between a Lakeview rowhouse with a shared side alley and a detached home up near Eastside Park with a wider driveway opening, and they arrive stocked for both. Response time across the city runs within a few hours for emergency calls, same day for most repairs.
- Lakeview
- Eastside
- Riverside
- Hillcrest
- South Paterson
Service Area – Cities Near Paterson
In addition to Paterson, our technicians serve the surrounding northern New Jersey metro area. We handle gate repair and electric gate work in Jersey City, NJ, North Bergen, NJ, and across the metro where our scheduling office coordinates dispatch. We also serve customers in Union City, CA and Newark, TX through our network of independently owned Kingswell locations.
Serving Paterson, NJ - Our Local Coverage Area
We’re based in the Paterson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Paterson
For most repairs, we can have a technician in Paterson the same day you call, and emergency calls are prioritized within a few hours. A live person answers around the clock, including holidays, so you’ll never wait on a callback queue. Call (940) 412-7340 and describe the problem; we’ll give you a real arrival window.
Most gate repairs and like-for-like replacements don’t require a city permit, and we’ll tell you in writing if your specific job does. New installations with significant concrete work or property-line questions may need a check with the building department. We handle the permitting conversation as part of the quote so you’re not left guessing.
Every repair carries the 365-Day Done Right Promise: if the fix fails within that period, we return and correct it at no charge. The guarantee is written on your invoice, not verbal. It’s part of the Kingswell Way, the same standard every Portcullis location operates under.
If your gate is dragging, stuck, or showing flood damage on one of Paterson’s older lots, call (940) 412-7340 for a free estimate. You’ll reach a person, get a written price before any work begins, and have the repair backed in writing for a full year.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Paterson Customers Say
"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva"The opener gave out and we were manually pushing the gate for a week. Portcullis got us in quick, swapped the opener, and set up the remotes for both our cars. Great to have it working again."
- Priscilla Nava