Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Richland Hills
A new driveway gate in Richland Hills typically runs $2,800 to $7,500 installed, depending on the gate material, width, and whether you need a full automatic opener system. A pedestrian gate costs less, usually $900 to $2,400. We serve all of Richland Hills with crews who know that your alley-side gate is often the first thing to shift out of plumb because of this area’s Blackland Prairie clay. Call (940) 412-7340 for a free estimate, and you’ll get a written price before any work starts.
Our Gate Installation team works on the mid-century ranch homes and acreage properties that define this part of Tarrant County. We’re not learning your neighborhood from a map when we pull up. We know the rear-alley layout near Baker Boulevard, the long driveways off Rufe Snow Drive, and the older wood gates throughout the Handley area. That local knowledge changes how we set posts, size operators, and plan the power run.
Why Portcullis Gate Repair Is Richland Hills’s Preferred Gate Installation Company
Portcullis Gate Repair has been a Kingswell company since 2008, and every Richland Hills job runs on the same four Kingswell Guarantee promises: a written price before any work begins, a real arrival window, a clean job site, and a written guarantee on the installation. Dean Prescott, who leads our team, sets that standard on every job. No technician shows up to measure a gate and then re-quotes the job at the door. You get the number in writing first.
Customers in Richland Hills keep calling us back because we answer the phone. Not a voicemail tree. A live person, 24 hours a day, every day including holidays. When a gate sags off its hinges the day before a family gathering on Labadie Drive, you want to talk to someone who can schedule a real arrival window, not wait for a callback. And when our tech arrives, that person is background-checked and in uniform. You know exactly who is walking up your driveway.
We also carry a 365-Day Done Right Promise on every installation. If the gate or operator isn’t installed right, we come back and make it right inside that year at no charge. That’s written on the invoice, not implied. For Richland Hills homeowners who have been burned before by a technician who disappeared after a failed fix, this is the difference between a gate company and a gate company that stands behind the work.
Automatic Gate Installation in Richland Hills
Automatic Gate Installation in Richland Hills means more than bolting a motor to a gate. It means planning for the power and span problem: on a long driveway or acreage entrance, you need an operator strong enough to swing a wide, heavy panel without straining, and you need a power source that doesn’t require trenching 300 feet of conduit. We install solar gate openers on Richland Hills properties where mains power isn’t practical at the entrance, and we size the actuator, the motorized arm that physically pushes the gate open, to the gate’s actual weight and span, not a guess.
Solar Operators for Long Driveways
A long driveway off Glenview Drive or Vance Road often has no electrical outlet anywhere near the gate. Trenching power can double the project cost. A solar gate opener with a properly sized battery bank handles the job without the trench, as long as the post footing is solid and the panel is sized for the gate’s duty cycle. We install the panel, the battery box, and the operator with the same written guarantee as a hardwired system.
Heavy-Duty Operators for Wide Farm Gates
Wide farm gates on acreage lots around Richland Hills need more torque than a standard residential opener provides. We size the operator for the gate’s actual leaf weight and width, then add a loop detector or keypad entry where you need hands-free access for vehicles or controlled entry for livestock areas. A gate that is 16 feet wide and solid steel does not run on a unit built for an 8-foot suburban gate.
Gate Installation Services in Richland Hills
Gate Installation Services in Richland Hills cover the full range: driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates. A typical driveway swing gate installation runs $2,800 to $5,200 for a single-leaf steel or aluminum gate with a standard operator. A double gate runs higher, usually $4,500 to $7,500, because you are hanging two leaves, two hinge sets, and a stronger operator to move both panels. A pedestrian gate installation runs $900 to $2,400 depending on the frame material and hardware.
Driveway and Security Gates
Driveway gates on Richland Hills ranch homes often replace an original chain-link or lightweight steel gate that has been dragging for years. Security gates add a keypad, an intercom, or a vehicle loop detector so the gate opens only for people you want on the property. We install the gate and the operator as one system, tested together before we leave.
Sliding and Double Gates
Sliding gates make sense on Richland Hills properties where a swing gate would block the driveway while opening or where the grade drops sharply toward the alley. Double gates work well for wide driveways, but the two panels must be hung so they meet evenly in the middle, which is exactly the thing clay heave undoes over time. We set posts deeper and re-plumb them before hanging panels on any double gate job.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Richland Hills
Our technicians are trained on nine major gate operator brands, and the three we see most often on Richland Hills properties are LiftMaster, DoorKing, and Viking. We also service Ghost Controls and Elite systems. Because we carry common parts for these brands on the truck, we can often complete a repair or installation in a single visit instead of scheduling a follow-up for a part. When you call about a Viking actuator on a sliding gate off Rufe Snow Drive, the tech who arrives already knows that system.
Common Gate Installation Problems We See in Richland Hills Homes
- Alley-side hinge posts walked out of plumb. The Blackland Prairie clay under Richland Hills shrinks in summer and swells after winter rain. That heave pushes the alley-side post out of vertical first, which drags the swing gate against the concrete or the fence line. We reset the post in a deeper footing and re-plumb it before re-hanging the panel.
- Wood privacy gates racked from summer heat and winter freezes. Triple-digit summers warp the frame; hard freezes seize the original hinges. The gate racks and never fully closes. We replace the frame or re-hang the panel with heavy-duty hinges and an anti-rack kit sized for the gate’s actual weight.
- Solar openers installed without a proper loop detector. On long rural driveways around Richland Hills, we often see a solar gate opener that was installed without a vehicle loop detector. The gate cycles every time a car approaches, even a neighbor’s car just turning around. We add the loop and re-tune the operator’s open and close limits.
- Undersized operators straining on wide farm gates. A wide gate on an acreage property needs an operator rated for the leaf weight and span. We regularly replace units that were undersized for the panel and burned out their gears in under two years. The right operator costs more up front and lasts far longer.
Pricing for Gate Installation in Richland Hills, TX
A single-leaf driveway gate installation in Richland Hills runs $2,800 to $5,200 with a standard automatic operator. A double gate runs $4,500 to $7,500. A pedestrian gate runs $900 to $2,400. A sliding gate runs $3,200 to $6,000. A solar operator adds $600 to $1,400 depending on the panel and battery bank size. The big variables are the gate width and weight, the post condition, and whether you need a new operator or a full keypad and loop detector package. Before any work starts, you get the full price in writing. That’s a Kingswell Guarantee, and it’s stamped on every invoice. Call (940) 412-7340 for a free estimate, and we’ll give you a real number, not a placeholder.
We Also Serve Cities Near Richland Hills
Portcullis Gate Repair serves Richland Hills and the surrounding Tarrant County market, including Fort Worth, Dallas, Houston, and San Antonio. If you are near the Richland Hills line and need gate work, call us and we’ll schedule a crew. Our Gate Installation in Richland Hills service runs on the same Kingswell Guarantee everywhere we work.
Serving Richland Hills, TX - Our Local Coverage Area
We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Richland Hills
The hinge post has likely heaved out of plumb from the shrink-swell cycle of the Blackland Prairie clay under your property. When the post tips even half an inch, the gate panel shifts and drags at the latch or the ground regardless of what you do to the hinges themselves. The fix is resetting the post in a deeper footing and re-plumbing it, then re-hanging the panel so the gate swings true. Call (940) 412-7340 and we’ll tell you exactly what the post is doing before you spend another hour on hinge bolts.
Yes. We install solar gate openers on Richland Hills acreage driveways where running mains power would mean trenching hundreds of feet. The system includes a solar panel, a battery bank sized for your gate’s daily duty cycle, and an operator matched to the gate’s weight and width. We size the battery bank for cloudy weeks and hard freezes, not ideal conditions. Call (940) 412-7340 for a free estimate on your specific driveway length and gate size.
You need an operator rated for the gate’s actual leaf weight and width, not the driveway’s width. A 16-foot solid steel gate weighs far more than a 12-foot aluminum panel, and the operator must be sized accordingly. We measure the gate, weigh the leaf, and select an operator with enough torque to move it without straining, then add a loop detector or keypad entry if you need vehicle or livestock access control. Call (940) 412-7340 and we’ll spec the right unit for your gate before you buy anything.
Yes. Automatic gates in Richland Hills must have safety photocells or an equivalent entrapment protection device installed and tested. This is not optional equipment. We install safety photocells on every automatic gate job, along with the reversing loop where the gate swings toward traffic or pedestrians. The safety system is part of the written quote, not an add-on after the fact.
Yes. We install keypad entry, vehicle loop detectors, intercoms, and wireless entry pads on Richland Hills acreage gates. A loop detector opens the gate automatically for vehicles exiting the property, which matters when you’re hauling a trailer or managing livestock access. The keypad gives you control over who gets through without leaving the cab. Call (940) 412-7340 for a written quote on the full access package.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Richland Hills since 2008.