Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Antioch
Gate repair in Antioch, CA is different from gate repair almost anywhere else in the East Bay, because Antioch sits at the east end of the Delta wind corridor. Afternoon westerly breezes funnel through the Carquinez Strait and regularly gust to 25-35 mph from June through September. That wind physically punishes driveway gates, forces automatic operators past their rated duty cycles, and creates failures that other cities don’t see. We answer the phone live around the clock, and our technicians roll into Antioch neighborhoods from Deer Valley Road to the riverfront with the same written-price, written-guarantee standard on every job. Call Portcullis Gate Repair at (940) 412-7340.
Why Portcullis Gate Repair Is Antioch’s Preferred Gate Repair Company
We’re an independently owned Kingswell company, and since 2008 every Portcullis job has been held to four written promises: a price before any work starts, a real arrival window, a clean job site, and a written guarantee on the repair. Antioch homeowners have told us the same story for years: another gate company quoted one number on the phone, then tried to double it at the door after taking the gate apart. That doesn’t happen with us, because the price is on paper before a single bolt is turned.
Our technicians know Antioch’s housing stock. The late-1990s through mid-2000s buildout along Lone Tree Way and Sand Creek Road installed ornamental iron driveway gates and pool gates that are now hitting peak failure age together. Older blocks near downtown have settled, frost-heaved post footings under 1960s and 1970s wood-and-post gates. Neighboring cities like Pittsburg and Brentwood don’t deal with the same wind load. We do, and our repair approach is built around it.
Every technician is background-checked and arrives in uniform, so you know exactly who is walking up your driveway before the truck stops. Dispatch and scheduling for Antioch crews are coordinated from our San Francisco Bay Area office, but the trucks and the techs serving your neighborhood are local. When a gate fails on a Friday afternoon and the Delta wind is rattling it off its track, you need a real person, not a callback queue. Call (940) 412-7340.
Sliding Gate Repair in Antioch
Sliding gate repair in Antioch is one of the most common calls we take, especially on shared driveways and tight cul-de-sacs where a swing gate physically won’t fit. On a Deer Valley Road shared driveway off a narrow cul-de-sac, we responded to a LiftMaster slide gate that was short-cycling every afternoon. The loop detector was fine, but wind-forced cycling had smoked the limit switch and glazed the motor brushes. We reset the rack and pinion travel limits, replaced the switch, and re-anchored the hinge post footing after finding it frost-heaved and shifted. The gate now holds its closed position through the 4 p.m. Delta gust without false obstruction trips.
Sliding gate repair in Antioch typically runs $340-$780 for track realignment, roller replacement, or limit-switch work. A full operator swap on a slide gate, including the motor, control board, and safety edge re-install, lands between $1,200 and $2,400 parts and labor. These are Antioch market ranges, not national averages.
Realignment and Roller Replacement
Sliding gates in wind-exposed Antioch driveways wear rollers and develop track drift faster than in sheltered cities. We replace flat-spotted rollers, reset the rack spacing, and torque the guide posts so the gate coasts smoothly instead of chattering against the wind.
Operator and Limit Switch Failure
When a gust pushes a slide gate past its stop point, the operator reads it as an obstruction and cycles against the wind repeatedly. That behavior burns limit switches and glazes motor brushes months early. Our first step is pulling the motor run-count data before assuming a mechanical failure.
Wrought Iron Gate Repair in Antioch
Wrought iron gate repair in Antioch means working on the ornamental driveway gates and pool gates installed during the Deer Valley Road and Lone Tree Way buildout. Those gates are now 15-25 years old, and they’re hitting peak failure age at the same time. Summer temperatures in Antioch regularly exceed 100°F, and the thermal expansion of metal frames combined with constant afternoon wind load creates a flex-and-contract cycle that cracks welds and loosens post anchors far faster than manufacturer specs anticipate.
Wrought iron hinge and post repair in Antioch runs $220-$480 per hinge assembly, including re-anchoring the post footing where settling or frost heave has shifted it. Weld repair on ornamental sections costs $140-$350 per repair point, depending on how much grinding and rust treatment the surrounding metal needs. A full sag correction that includes re-setting the hinge post, re-welding the split rail, and respotting the gate typically runs $500-$900. We quote the exact number in writing before any work begins.
Weld and Rust Repair
Antioch’s wet winter months followed by 100°F summer heat cycles produce rust at weld points where the factory finish has already cracked. We grind back to clean steel, re-weld, and apply a rust-inhibiting treatment matched to your gate’s existing finish.
Hinge Post Re-anchoring
Many Antioch homes have settled concrete footings under hinge posts. We dig out the frost-heaved footing, pour a new concrete base with proper drainage slope, and re-anchor the post with a wet-set anchor. The sag a homeowner sees in the panel is usually a footing problem, not a panel problem.
Trusted Brands We Service in Antioch
Our technicians train on nine major gate-operator brands, and the ones we see most in Antioch drives are Linear, Viking, and DoorKing. We stock commonly replaced parts for these systems locally, so a limit switch, capacitor, or control board doesn’t mean a week of waiting. If your motor burned out from wind-forced cycling, we arrive already knowing the specific system on your property, not guessing at it. The technician pulling up to your Antioch home has serviced your operator model before.
Common Gate Repair Problems We See in Antioch Homes
- Wind-forced operator cycling. The Delta breeze pushes automatic gates past their stop points, sensors read it as an obstruction, and the motor runs against the wind until something gives. We check motor run-counts before replacing parts.
- Frost-heaved post footings. Older Antioch properties near the riverfront and downtown retain gates tied to 1960s and 1970s concrete work. Settled or frost-heaved footings make hinge posts lean, causing sag that looks like a panel problem but isn’t.
- Weld cracks from thermal cycling. Antioch gates bake in 100°F heat, then get hammered by afternoon wind. The metal expands, contracts, and flexes daily. Weld points crack. We see it on nearly every ornamental iron gate older than 15 years.
- Shared-driveway clearance failures. On tight cul-de-sacs off Deer Valley Road and along Lone Tree Way, swing gates on shared rights of way get clipped, forced, and racked out of square. We reconfigure to slide gates where the space works.
Pricing for Gate Repair in Antioch, CA
Most gate repairs in Antioch land between $220 and $780 for common fixes: hinge replacement, roller and track work, limit-switch replacement, and weld repairs. A full automatic operator swap runs $1,200 to $2,400. Sag correction with footing re-anchoring runs $500 to $900. These are the numbers we quote in Antioch every week. The exact price depends on your gate’s size, the operator brand, and how much wind damage the system has absorbed. We hand you a written price before the work starts, and that’s the number on the invoice. No add-ons after the fact. Call (940) 412-7340 for a free estimate, and we’ll schedule a time that works around vehicle and pedestrian access, not against it.
| Repair Type | Antioch Price Range |
|---|---|
| Hinge and post repair (per assembly) | $220-$480 |
| Weld repair (per point) | $140-$350 |
| Slide gate realignment | $340-$780 |
| Full sag correction with footing work | $500-$900 |
| Automatic operator swap | $1,200-$2,400 |
We Also Serve Cities Near Antioch
Portcullis Gate Repair serves all of Antioch and the surrounding East Contra Costa communities, including Oakley, Pittsburg, Clayton, and Brentwood. If you’re just outside the city line, we still answer the phone and still show up with a written price. For the full scope of what we do, see our Gate Repair team’s service page.
Serving Antioch, CA - Our Local Coverage Area
We’re based in the Antioch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Antioch
A Delta wind gust pushes your gate past its stop point, the operator’s obstruction sensor reads that as resistance, and the motor cycles trying to close against the wind. That repeated cycling burns out limit switches and motor brushes months early. A technician should pull the motor run-count data before replacing parts. Call (940) 412-7340 and we’ll diagnose it correctly the first visit.
Yes, in most Antioch shared-driveway situations a slide gate fits where a swing gate can’t because it travels along the fence line rather than rotating out into the right of way. We convert swing gates to slide gates regularly on Deer Valley Road cul-de-sacs and Lone Tree Way properties. The conversion includes new track, rollers, and operator, assuming the siding space exists. Estimates are free.
No, the sag is usually a footing problem, not a panel problem. Antioch’s older concrete footings have settled or frost-heaved, tilting the hinge post and pulling the gate out of square. We re-anchor the post in a new footing and re-align the gate. That repair runs $500-$900 in Antioch, and we’ll quote it in writing before starting.
We train on nine major gate-operator brands, including Linear, Viking, and DoorKing, which are among the most common systems in Antioch. The tech who arrives already knows your operator model and carries commonly replaced parts for it. That means fewer callbacks and faster repairs.
Yes, automatic gates in California must have tested safety edges and photo-eye entrapment protection that meet current standards. If your system predates this requirement or the safety edge has degraded from years of Antioch heat and wind exposure, we can bring it up to code as part of the repair. Call (940) 412-7340 and we’ll check it during the visit.
Contact Portcullis Gate Repair in Antioch
When your gate fails, you want a company that answers the phone, shows up in the window it gave, and hands you a written price before touching a single bolt. That’s how Portcullis works, on every job, for every Antioch customer. Our 365-Day Done Right Promise means if the repair fails within a year, we return and fix it at no charge. Written on the invoice, every time. Call (940) 412-7340 for a free estimate, and Dean Prescott or one of our Antioch techs will get you scheduled.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Antioch since 2008.