Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Roanoke
Gate repair in Roanoke usually costs between $185 and $640 for the most common fixes, and we can typically have a technician at your property within one business day. If your automatic gate has stopped closing, started dragging on the concrete, or is binding against its latch, call (940) 412-7340 and we’ll diagnose it over the phone before we even schedule the truck.
We work throughout Roanoke‘s HOA communities, along Avondale-Haslet Road, and across the Alliance corridor. Our techs know these neighborhoods because we’re here constantly, resetting opener limits on gates that the Blackland Prairie clay has pulled out of plumb. That local familiarity means we show up already knowing what your gate is likely doing and why.
Dean Prescott leads our Roanoke crew, and every job gets a written price before a single bolt is turned.
Why Portcullis Gate Repair Is Roanoke’s Preferred Gate Repair Company
Roanoke homeowners call us because we answer the phone. Not a voicemail tree, not a callback queue. A person answers at (940) 412-7340, day or night, including holidays. That one fact matters more than any marketing claim we could make, because a gate stuck open at 10 p.m. is a security problem you want addressed now, not tomorrow morning.
Every Portcullis location is an independently owned Kingswell company, held to the same written Kingswell Guarantee on every job: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on the repair.
Our technicians arrive in uniform, background-checked, and already briefed on the operator brand at your property. Roanoke homeowners regularly tell us the previous company either no-showed, doubled the quote at the door, or vanished after a failed fix. We don’t do any of that. Our Gate Repair team backs every repair with the 365-Day Done Right Promise: if the repair fails inside that period, we come back and correct it at no charge.
If you’re searching for Gate Repair in Roanoke, you’ve probably already dealt with a company that overpromised. We’d rather show you a written guarantee than tell you we’re the best.
Wrought Iron Gate Repair in Roanoke
Wrought iron gate repair is the bread-and-butter call for Roanoke’s HOA communities, where ornamental iron swing gates are the standard on nearly every lot along Avondale-Haslet Road and near the Alliance corridor. This work typically means re-aligning or re-plumbing the hinge post, correcting a sag at the latch side, rebuilding a bottom hinge that has wallowed out, or straightening a bent top rail. Most wrought iron repairs in Roanoke run $220 to $610, depending on how far the post footing has moved and whether the gate panel itself needs heat-straightening.
When a Roanoke homeowner calls us about a wrought iron gate, the issue is rarely rust. It’s usually geometry. The gate was installed plumb, and then the clay under the hinge post shrank in a summer drought and tilted the whole assembly.
Hinge Post Re-Plumbing
Summer clay shrinkage tilts hinge posts out of plumb in a matter of weeks. We pull the post, reset the footing with properly compacted material, re-plumb it, and then re-hang the gate so it swings true. This is the difference between a repair that lasts one season and one that fails again by next August.
Sag Correction and Latch Re-Alignment
A sagging gate panel drags on the concrete and rattles the latch. We correct the sag at the hinge side, re-align the latch strike, and verify the gate cycles cleanly through its full arc. On shared driveways, we keep one side passable the entire time we work.
Metal Gate Repair in Roanoke
Metal gate repair in Roanoke covers steel and aluminum slide gates, welded frames, and the rack-and-pinion systems that move them. These are common in Roanoke’s newer subdivisions on mid-size lots where a swing gate won’t fit, so the gate slides along a steel track instead. Typical metal gate repairs here run $185 to $540, with rack replacement and post re-shimming at the upper end.
What we see most in Roanoke is a slide gate that has begun grinding or jerking. The cause is usually the clay shifting the track bed or a worn drive gear, and the fix is rarely just lubricating the rollers.
Slide Gate Track and Rack Repair
When the concrete pad shifts with the clay, the steel track moves with it. We re-shim or re-anchor the track, inspect the rack for worn teeth, and adjust the drive gear mesh so the gate rolls smoothly instead of shuddering.
Welded Frame Reinforcement
Weld failures show up at the joints where the frame carries the most weight, usually the leading edge or the drive-side corner. We grind out the cracked weld, re-weld, and reinforce the frame so the same failure doesn’t return.
Trusted Brands We Service in Roanoke
Our techs carry factory diagnostic experience on nine major gate-operator brands, and in Roanoke the calls skew heavily toward LiftMaster, FAAC, BFT, Linear, Viking, and Ghost Controls. When a Linear arm operator on an Avondale-Haslet Road property throws a limit error, our tech already knows the board’s diagnostic sequence and typically carries the correct replacement part on the truck. That means fewer return trips and less waiting for a part to ship from a distributor.
Common Gate Repair Problems We See in Roanoke Homes
Roanoke’s gate failures are predictable. The local clay and the local heat create a specific pattern:
- August gate sag from clay shrinkage. The Blackland Prairie clay under a hinge post loses moisture through the summer, shrinks, and lets the post tilt. The gate begins dragging at the latch side or binding mid-swing, and the opener’s travel limits go out of calibration.
- Mid-summer electronics failures. Sustained 100°F-plus heat bakes UV-exposed control board enclosures, degrades wiring insulation, and kills battery backups faster than rated lifespans. Keypad entry failures and phantom loop detections spike in Roanoke every July and August.
- Hard-freeze control box failures. Moisture gets forced into unsealed control boxes, and hydraulic fluid in ram-style openers thickens. Roanoke saw a city-wide surge of failure calls after February 2021, and every hard freeze since has repeated the pattern on a smaller scale.
- Shared-driveway access constraints. Many Roanoke properties share a narrow right of way with a neighbor. A swing gate panel can’t always be fully opened or removed without blocking vehicle and pedestrian access, which changes how the repair has to be staged.
Pricing for Gate Repair in Roanoke, TX
Here’s what Roanoke homeowners can expect in 2026. A hinge post re-plumb and sag correction runs $280 to $610 depending on footing depth and access. An opener limit-switch recalibration after the gate has dragged is $120 to $220. A slide gate rack replacement runs $340 to $540. A control board replacement is $185 to $390 including the part. Every job gets a written price before any work starts, and that price is what you pay. No revised total at the door, no surprise line items. Estimates are free, and you can call (940) 412-7340 to get one.
We Also Serve Cities Near Roanoke
We handle Roanoke and the surrounding area, including Flower Mound, Southlake, Argyle, and Keller. If your property is in one of those cities and you’re dealing with a gate that won’t close or won’t stop dragging, call the same number and we’ll route a technician to you.
Serving Roanoke, TX - Our Local Coverage Area
We’re based in the Roanoke area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Roanoke
Because the Blackland Prairie clay under your hinge post has shrunk in the summer heat, tilting the post out of plumb and pulling the gate down at the latch side. This is the single most common failure we see in Roanoke’s HOA subdivisions, especially along Avondale-Haslet Road. The fix is re-plumbing the post, correcting the sag, and recalibrating the opener’s travel limits. Call (940) 412-7340 and we’ll schedule it before the gate wears a groove in the concrete.
Yes. Slide gates are what we install and repair on Roanoke lots where the setback or driveway geometry makes a swing gate impractical. The work usually means re-aligning the track, replacing worn drive rack segments, or shimming the post that anchors the operator. We also keep the gate passable while we work, which matters when the driveway is the only way in and out.
We stage the repair so vehicle and pedestrian access stays open. On a shared driveway off Avondale-Haslet Road, that means working one leaf of a double gate at a time, or leaving a pedestrian gate passable while the vehicle gate is on its saw horses. We also coordinate with your HOA’s property manager if that’s who authorized the call.
Because moisture got forced into an unsealed control box and either shorted the board or thickened the hydraulic fluid in a ram-style operator. Roanoke saw this pattern city-wide after February 2021, and it repeats after every hard freeze since. The usual fix is a board replacement and re-sealing of the enclosure, which runs $185 to $390. We’ll quote it in writing before we touch anything.
Almost always just the hinge post. The panel is usually fine; the footing under the post is what moved. We pull the post, re-set the footing, re-plumb it, and re-hang the panel. A new panel is only needed when the frame itself has cracked or the metal has fatigued beyond repair, which we’ll tell you honestly and show you before quoting. Estimates are free at (940) 412-7340.
Written by Dean Prescott, Owner at Portcullis Gate Repair, a Kingswell company serving Roanoke since 2008.