Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Krum, TX
Most gate failures we see in Krum, TX aren’t the motor or the hinges. They’re the posts. That’s the single biggest difference between working here and working in Denton or Lewisville, and it’s the first thing our technicians look at when a gate starts binding or dragging in Krum. The expansive clay soil under this part of Denton County moves every year, and gates on acreage lots take the worst of it. If your gate won’t open smoothly or hangs at an angle, call us at (940) 412-7340 and we’ll give you a straight answer about what’s actually happening before any work begins.
Why Krum Homes Are Different
Krum is a fast-growing rural-acreage community where a big share of properties are horse farms, small ranches, and 1 to 5 acre residential lots. That means our trucks routinely handle two very different jobs on the same property: a heavy pipe-and-panel livestock gate at the back pasture and an automatic ornamental driveway gate at the front entrance. The older the parcel, the more likely it is to have T-post or shallow cemented-pipe settings that were never designed for an operator. The newer the subdivision, the more likely the driveway gate was installed by a general contractor who treated the post footing like a standard DFW suburbs job, not a Krum job.
The shrink-swell clay here is the recurring storyline. It expands dramatically after spring rains and cracks hard during summer droughts. Year after year, that cycle pushes posts out of plumb. We regularly find automatic gates that were installed during Krum’s post-2015 building boom tilted 10 to 15 degrees within two or three years, long before the gate hardware itself has worn out. The motor didn’t fail. The ground moved underneath it. Krum also catches strong straight-line thunderstorm winds out of the southwest, which blow unsecured swing gates off their hinges and bend lightweight panel frames. It’s a different set of conditions than nearby Denton, and it changes which parts of the job you have to get right the first time. Our home page gives you a full look at how we approach service across the wider DFW area.
Our Main Krum Services
The two kinds of calls we get most from Krum homeowners are a gate that has stopped opening and a gate that was built wrong for the soil underneath it. Here is what each one looks like when we’re working on it here.
Gate Repair in Krum
Most repair calls start with a gate that won’t latch, won’t stay on its hinges, or has begun to drag against the ground on one side. In Krum, we start by checking plumb. If a post has heaved even a few degrees, any hinge or wheel alignment we do will last only until the next wet spring. Our Gate Repair in Krum page covers how we diagnose post movement, frame racking, and damaged hinges, and what repair actually looks like when clay is the root cause. We’ve had calls where the operator got blamed for a failure that was really just a frozen post footing. Repair is usually the right call when the gate structure and the ground beneath it can be stabilized without replacing everything.
Gate Installation in Krum
A new gate on a Krum acreage lot has to be engineered for what the soil does, not just what the gate weighs. That means deeper concrete footings with bell-bottoms where the clay warrants it, and more careful selection of post diameter and frame steel if the gate will be wind-loaded from the southwest. Our Gate Installation in Krum page walks through what we plan for when we’re setting a gate on this soil. We see a lot of homeowner-installed operators bolted onto ranch gates that were never designed to carry a motor. If you’re building or replacing, install is where you fix those problems the first time rather than inheriting them.
Electric Gate Repair in Krum
Electric gate problems in Krum fall into a familiar pattern: the operator was matched to the gate when the gate was new and square, and then the ground shifted and the operator started fighting the frame. The control board might be fine. The actuator’s little limit switches just can’t stay calibrated when the post moves. Our Electric Gate Repair in Krum page covers actuator replacement, operator programming, safety sensor issues, and post-movement correction work. When a livestock gate gets automated on the cheap, we often find the operator sized wrong from day one. We’ll tell you honestly if the operator is worth saving or if you’d be better served by a different model.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Krum
We maintain certified service capability across the gate-operator brands most common on Krum acreage lots. That includes FAAC and BFT for heavier ornamental driveway gates and swing operators, plus Linear and Viking for slide and ranch applications. Our our brands page covers the full list. We stock the most common replacement control boards, actuators, and safety sensors locally, and for less common parts we quote you a lead time before any work is scheduled, not after.
Pricing for Gate Company in Krum, TX
These are the price ranges we typically quote for the most common gate job types in Krum. Every one is a written price, agreed on before a single bolt is turned.
| Service | Typical range in Krum |
|---|---|
| Gate post stabilization and realignment | $280-$520 |
| Swing gate hinge replacement (pair) | $140-$320 |
| Gate frame straightening or reinforcing | $250-$600 |
| Gate latch and lock repair or replacement | $90-$240 |
| Automatic gate operator troubleshooting | $120-$280 |
| Swing gate actuator replacement | $450-$900 |
| Slide gate operator replacement | $600-$1,200 |
| Safety sensor replacement or realignment | $120-$260 |
| Control board replacement | $280-$550 |
| Remote and keypad programming | $65-$150 |
What pushes a Krum job toward the top of these ranges is usually post depth. If a gate has moved off plumb and the concrete footing needs to be excavated and re-poured with a bell-bottom, that’s real labor and real material. What keeps the price honest is the same every time: you get the number in writing before any work begins, and you get a written guarantee on the repair. No after-the-fact surprises.
Neighborhoods We Serve in Krum
We cover the full Krum area, from the older homesteads east of town toward Sanger to the newer acreage subdivisions to the west and northwest. That includes working ranch parcels, equestrian properties, and the newest residential builds. Here are a few of the areas where we’re on site regularly.
- Canyon Ridge
- Jackson Hills
- Ridgecrest
- Timberbrook
- Rural acreage parcels west of I-35
For most gate issues in the Krum area, we can have a technician on site the same day or within a real arrival window we give you when you call. You’ll know when we’re coming, and you’ll know the price before we start.
Service Area – Cities Near Krum
We serve Krum, TX and the surrounding communities in northern Denton County. Whether you’re on an acreage lot here or in a nearby town with a different gate setup, we cover the same territory with the same Kingswell Guarantee. You’ll also find us working in Sanger, TX, Denton, TX, Argyle, TX, and Aubrey, TX. Scheduling and dispatch are coordinated from the brand’s Dallas-Fort Worth office, and our crews serve Krum locally, so you’re not waiting on someone driving up from another state.
Serving Krum, TX - Our Local Coverage Area
We’re based in the Krum area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Krum
Most Krum gate repairs can be scheduled the same day or next day, depending on the time of year and what parts are needed. When you call (940) 412-7340, we give you a real arrival window and we commit to it. We don’t hand off to a callback queue; a live person answers around the clock.
Krum and Denton County generally treat gate repair as maintenance, so permits are rarely required for fixing an existing gate or operator. New installations can have different rules depending on your lot, zoning, and HOA covenants. We’ll help you find out what applies to your property before we quote the job, not after.
Yes. We service ornamental driveway gates, automatic slide and swing operators, and heavy pipe-and-panel ranch gates. Many Krum properties have both, often with different hardware on each. Our technicians are set up for the full mix on a single visit.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Krum Customers Say
"Our driveway gate stopped halfway and wouldn't close, which is a problem when it's the only thing between the street and the yard. They came out same day, replaced the motor, and it's smooth again."
- Leonard Pace"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike