Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Clovis, CA
Gate repair in Clovis, CA usually runs $150-$450 for common hinge, latch, and post repairs, with most jobs completed in a single visit. The bigger cost drivers here are operator replacements on electric gates and full post resets in the valley’s expansive clay. Clovis gates fail in predictable waves because so many homes were built in the same tract developments with the same hardware, and we see the same failures repeat block after block. Call (940) 412-7340 and you’ll get a written price before we touch a single bolt.
Why Clovis Homes Are Different
Clovis’s housing stock is unusually uniform. The master-planned subdivisions that rolled out across the northeast side from the 1990s through the early 2010s were built by a small group of tract builders, and nearly every lot got the same ornamental tubular-steel or wrought-iron side-yard gate. That means thousands of gates in Clovis are now hitting 15 to 30 years old at the same time. The powder coating is failing, hinges are stripping out of thin post walls, and the post anchors set in expansive clay are heaving as the soil shrinks and swells with the seasons. When we replace a stripped hinge on one house, we often find three or four neighbors on the same cul-de-sac with the identical problem a few weeks behind.
The climate compounds it. Clovis summers routinely push past 105°F, which bakes wooden gate frames until they crack and embrittles rubber seals and plastic rollers on automated gates within a couple of seasons. Then the Tule fog settles in from December through February and works rust into any exposed hinge or latch that lost its coating during the summer. A gate that looked fine in October can be stiff and noisy by February. Around Old Town Clovis on the west side, the older equestrian-zoned parcels have a different stock entirely: wooden ranch-style gates with heavier strap hinges and post-and-rail hardware that need a different set of parts and a different touch.
Our Main Clovis Services
Three services cover almost every gate situation in Clovis, and each has its own page with local pricing and details.
Gate Repair in Clovis
Most Clovis gate repairs are mechanical: sagging gates, stripped hinges, dry-rotted wood where the hinge plate meets the frame, or posts that have started to lean as the clay soil shifts. We replace hinge sets, square and rehang the leaf, reset loose posts in new concrete, and repair or replace latches, spring rods, and drop rods. We see a lot of powder-coat failure on tubular steel gates from the 2000s-era tracts, and we treat the corrosion before installing new hardware so the repair doesn’t fail within a season. Gate Repair in Clovis covers our process, response times, and the written Kingswell Guarantee on every repair.
Gate Installation in Clovis
New gate installation in Clovis means matching the tract’s existing style or starting fresh with a sturdier spec. We measure the opening, check the existing posts for plumb and sound concrete, and quote a complete job with the gate, hardware, and post work included. For Clovis homeowners replacing a failed 2000s-era ornamental gate, we usually recommend heavier-gauge posts and deeper footings than the original builder used, because the clay soil heave that damaged the first gate will attack the second one the same way. Gate Installation in Clovis explains the full process and what affects the final price.
Electric Gate Repair in Clovis
Electric gate failures in Clovis follow the seasons. Summer heat kills circuit boards and capacitors in older operators, and winter fog accelerates corrosion on limit switches and wiring connections. We diagnose and repair gate operators from most major brands, replace blown batteries and photo-eyes, and rebuild or replace actuator arms that have lost pressure or seized. When a Clovis electric gate stops mid-cycle or won’t close all the way, the fix is usually contained to the operator, the safety loops, or the power supply. Electric Gate Repair in Clovis details our operator service and the brands we stock parts for.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Clovis
We train our technicians on the operators most common in Clovis tract homes and custom estates, including Linear, Viking, Ghost Controls, and DoorKing. We carry the most-failed parts for these brands on our trucks, which shortens most Clovis repairs to one visit. See our brands for the full list.
Pricing for Gate Company in Clovis, CA
| Service | Typical range in Clovis |
|---|---|
| Wooden gate repair (hinges, latch, sag) | $150-$350 |
| Steel or iron gate repair | $180-$400 |
| Full gate replacement (basic steel) | $900-$2,400 |
| Full gate replacement (higher-end iron or custom wood) | $2,500-$6,000 |
| Automated gate operator replacement (swing) | $1,200-$3,500 |
| Automated gate operator replacement (slide) | $2,500-$7,000 |
| Electric gate repair (boards, sensors, limit switches) | $125-$500 |
| Weld and fabrication repair (steel gates) | $140-$600 |
| Post reset in concrete (single post) | $200-$450 |
Prices in Clovis push toward the upper end of these ranges when a post needs full excavation in hard, sun-baked clay or when the gate has been left sagging long enough that the hinges have wallowed out the frame. Every job gets a written price before work starts, so the number we quote is the number you pay.
Neighborhoods We Serve in Clovis
We cover all of Clovis, from the older ranch-style lots around Old Town to the big tract subdivisions on the northeast side. Most neighborhoods are within a 20-30 minute drive of our local dispatch, and our arrival windows are set when you book the call.
- Old Town Clovis
- Harlan Ranch
- Clovis East / Buchanan area
- Loma Vista
- DeWolf / Herndon corridor
Service Area – Cities Near Clovis
Beyond Clovis, our crews also serve neighboring communities across the Central Valley. That includes Fresno, TX, Sanger, TX, Fowler, CA, and Madera, CA. Scheduling and dispatch for the area are coordinated from the brand’s Fresno, Central Valley office, with crews dedicated to Clovis work.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Clovis
Most Clovis calls are scheduled within a day or two, and we hold the arrival window we give you. Emergency gate failures, like a gate that won’t close at all, get priority on the schedule. Call (940) 412-7340 and we’ll give you the earliest honest window.
Many Clovis subdivisions have HOA design rules, especially for visible driveway gates, and some require approval before a full replacement changes the look. A repair that keeps the existing gate style rarely triggers review, but we’ll flag it if your job needs HOA sign-off before we start.
Every repair we do carries the 365-Day Done Right Promise. If the repair fails within that year, we come back and make it right at no charge. The guarantee is written on your invoice, not a verbal promise.
If your gate is sagging, stuck, or dead in Clovis, call (940) 412-7340 now. We’ll quote the price in writing before any work begins, and we’ll show up in the window we give you. That’s the Kingswell standard on every job in Clovis.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Clovis Customers Say
"The opener gave out and we were manually pushing the gate for a week. Portcullis got us in quick, swapped the opener, and set up the remotes for both our cars. Great to have it working again."
- Priscilla Nava"Our driveway gate stopped halfway and wouldn't close, which is a problem when it's the only thing between the street and the yard. They came out same day, replaced the motor, and it's smooth again."
- Leonard Pace"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw