Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Everett, WA
Gate repair in Everett means working against salt air, nine months of rain, and a housing stock built during the Boeing boom. Most homes here still carry the original wood-post or chain-link gates from the 1940s through 1960s, and the hardware on those gates has been absorbing Puget Sound moisture for sixty to eighty years. We’re a Kingswell gate company serving Everett homeowners with a written price before any work starts, real arrival windows, and a 365-Day Done Right Promise on every repair. Call (940) 412-7340 and you’ll reach a live person, day or night.
Why Everett Homes Are Different
Everett sits directly on Port Gardner Bay, which means the air itself works against gate hardware. Salt-laden winds off the Sound accelerate oxidation on steel hinges, springs, and opener arms far faster than the Seattle metro average. We routinely see surface rust and pitting on uncoated mild steel within eighteen to twenty-four months of installation. In the blocks near the Everett Marina and the Naval Station Everett perimeter, standard zinc-plated hardware from big-box stores fails within one to two seasons. Specifying hot-dip galvanized or 316 stainless hardware isn’t an upsell in those zones, it’s the minimum viable install.
The housing stock compounds the problem. Riverside, Lowell, and the north-end corridors are post-WWII working-class neighborhoods built for Boeing factory workers, and many still have their original gates. Those wood frames swell and bind predictably every October when the fall rains arrive, which is why our dispatch board fills up with stuck-gate calls right around the first sustained wet week. Newer subdivisions around the south end and Silver Lake lean toward vinyl and aluminum ornamental gates, which resist corrosion differently but develop their own UV-fade and bracket-crack issues in the wet-freeze cycles that hit Snohomish County each winter.
Our Main Everett Services
Everett homeowners call us most often for three things: a gate that stopped swinging, a gate that needs replacing, and an electric opener that won’t respond. Each has its own detailed Everett page linked below.
Gate Repair in Everett
Most repair calls in Everett start with a hinge or a post. Decades of rain against the original wood means the post rots at ground level, the gate drops, and the latch stops lining up. We replace the post, re-hang the gate, and install hardware that’s actually spec’d for a salt-air environment, not whatever the hardware aisle had on the shelf. On chain-link gates around Riverside and Lowell, we also see stretched tension bands and bowed top rails from decades of use. See the full breakdown on our Gate Repair in Everett page, including what a typical hinge-and-post job costs.
Gate Installation in Everett
A new gate in Everett is a material decision before it’s anything else. The marine air off Port Gardner rules out uncoated mild steel in most yards, and the ground stays wet enough through winter that posts need proper concrete footings or they’ll lean by spring. We measure the opening, discuss what your setback and driveway slope allow, and write down a price before any work starts. The full scope, including permitting realities and what to expect from different gate materials, is on the Gate Installation in Everett page.
Electric Gate Repair in Everett
Electric openers in Everett die from corrosion first. The control board sits in a housing that traps moisture, and the salt air works on every exposed connection. We see failed photo eyes, seized actuator arms, and burned-out transformers as the routine failure set. Our technicians carry parts for Linear, Viking, Ghost Controls, and DoorKing systems, so the truck that arrives can usually complete the repair on the first visit. For a full walkthrough of what we diagnose and fix, see Electric Gate Repair in Everett.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Everett
Our technicians carry parts for the gate operators we see most in Everett: Linear, Viking, Ghost Controls, and DoorKing. Most common repairs are completed same-visit from truck stock. For the full list of what we service, see our brands.
Pricing for Gate Company in Everett, WA
These are the ranges we quote for common gate jobs in Everett, parts and labor. Every job gets a written price before we start, and that price is what you pay.
| Service | Typical range in Everett |
|---|---|
| Hinge replacement (standard pair) | $180-$340 |
| Post replacement (wood or steel, in concrete) | $340-$620 |
| Gate re-hang and realign | $220-$480 |
| Swing-gate actuator swap | $650-$1,100 |
| Control board replacement | $320-$580 |
| Photo eye replacement or realignment | $130-$220 |
| Full wood gate replacement (standard drive gate) | $1,400-$3,200 |
| Full chain-link gate replacement | $1,000-$2,400 |
| Underground loop detector replacement | $420-$720 |
| Automatic opener installation (single swing) | $2,100-$4,600 |
Prices push upward in Everett when the job is near the waterfront and requires 316 stainless or hot-dip galvanized hardware, and when a rotted post has taken the hinge mounting with it. You’ll always see the number in writing before we pick up a tool, and it doesn’t change at the door.
Neighborhoods We Serve in Everett
We run calls across the full city, from the 1940s bungalows of Riverside and Lowell to the newer subdivisions around Silver Lake and the south end, and up through the north-end corridors toward the Snohomish River. Most Everett jobs can be reached within a two-to-four-hour arrival window during normal work hours.
- Riverside
- Lowell
- Silver Lake
- North Everett
- South Everett
- View Ridge
Service Area – Cities Near Everett
Our crews also serve the surrounding Snohomish County communities. If your gate is in Marysville, WA, Lake Stevens, WA, Mukilteo, WA, or Snohomish, WA, you get the same written price and 365-Day Done Right Promise we give in Everett.
Serving Everett, WA - Our Local Coverage Area
We’re based in the Everett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Everett
Most Everett calls are scheduled within a two-to-four-hour window during normal work hours, and our phone is answered by a live person 24/7. If your gate is stuck open and the property is unsecured, call (940) 412-7340 and we’ll tell you exactly when a technician can be there.
Most residential gate replacements in Everett don’t require a permit if the work stays on your property and doesn’t alter the driveway approach. Electric openers on a shared access easement sometimes trigger additional requirements, and we’ll flag that during the estimate if it applies to your setup.
Every repair carries the 365-Day Done Right Promise in writing. If the same repair fails within that year, we come back and fix it at no charge. No callout fee, no restocking fee, no argument. It’s printed on the invoice before you sign it.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Everett Customers Say
"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva