Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Everman
Gate installation in Everman starts with the soil under the posts, not the gate itself. Most driveways and backyard entries here sit on Blackland Prairie clay that expands in spring and shrinks in summer, and that movement is precisely why so many gates in this town rack out of square within a year. Portcullis Gate Repair has handled installations on Gate Installation projects across Everman long enough to know that a proper footing beats a bigger motor every single time. We show up when we say we will, write the price before we turn a bolt, and put the guarantee in writing. Call (940) 412-7340 and we will walk the property with you.
Why Portcullis Gate Repair Is Everman’s Preferred Gate Installation Company
This is a working-class town where people keep their gates for decades, and we respect that. We are not going to sell you a new opener when the old one needs a board, and we are not going to swap hinges when the post is the problem. Our technicians are background-checked, arrive in uniform, and service nine major gate-operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a Viking board fails or a Ghost Controls arm quits, the tech in the truck already knows the system.
Every job follows the Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails. That guarantee runs 365 days, it is stamped on every invoice, and the return visit costs you nothing. Dean Prescott runs this Portcullis location as an independently owned Kingswell company, held to the same four Kingswell Guarantee promises as every other Kingswell shop: a written price, a real arrival window, a clean job site, and a written guarantee.
Electric Gate Installation in Everman
Electric Gate Installation in Everman usually means adding an operator to an existing swing or slide gate, or hanging a full gate-and-operator package where the driveway currently has a manual gate or none at all. The job involves setting posts to hold the gate and the actuator, mounting the operator, running low-voltage wiring or a solar panel, installing safety photocells and edge sensors, and programming travel limits and remote controls. A basic single swing gate with a chain-driven or articulated-arm opener in Everman typically runs $2,800 to $5,400 installed, depending on gate width, power access, and how much of the old hardware we can reuse.
Homes built in Everman between the 1950s and 1980s often have original gate frames worth saving, but the operators on them are another story: obsolete control boards, no entrapment protection, and wiring that has baked in Texas heat for decades. Retrofitting a modern operator onto a solid older frame is something we do regularly here, and it usually costs less than half of a full replacement.
Operator Retrofit vs. Full Replacement
Retrofit makes sense when the post footings are stable and the gate frame is not twisted. We pull the old operator, mount a new one, add photocells and safety edges where none existed, and reprogram remotes. Replacement is the cheaper answer when the posts have heaved or the gate frame is racked, because no operator survives on a post that keeps moving.
Solar Operators for Everman Driveways
Many Everman driveways have no power at the gate line. A solar operator with a buried loop or keypad entry typically runs $3,200 to $5,900, and North Central Texas sun gives these units plenty of charge except during the cloudiest winter weeks. We size panel and battery to the gate’s daily cycle, not to some national average.
Driveway Gate Installation in Everman
Driveway Gate Installation in Everman is a footing job first and a hardware job second. The dominant driveway gate style here is the ranch-era swing gate: tubular steel or chain-link, hung on posts set in undersized concrete tube forms that the Blackland clay outmuscles within a year. A new driveway swing gate in Everman, including posts, frame, hinges, latch, and basic manual hardware, typically runs $1,800 to $3,400. Adding an electric operator brings the total to $2,800 to $5,400 as covered above. Sliding gates run higher, usually $3,500 to $7,000, because the track, roller trucks, and cantilever frame add material and labor.
The houses here sit on small ranch lots, and many driveways angle or slope. We measure the driveway, check clearance for a swing arc versus a slide path, and tell you straight which style will hold up. A swing gate needs room to arc. A slide gate needs a straight track run. On a short Everman driveway, swing is usually the answer; on a deeper setback along the east side of town, slide often fits better.
Post Footings That Survive Blackland Clay
The single biggest difference between our installations and the budget ones that fail here is footing depth and width. We dig below the clay’s active zone, set posts in engineered footings with gravel drainage, and let the concrete cure before hanging the gate. A hinge-post footing that costs a few hundred extra dollars now is the difference between a gate that swings square for a decade and one that drags in August.
Gate Styles for Everman Ranch Homes
We recommend welded steel frames with vertical pickets for most Everman properties. They match the ranch architecture, they take heat well, and powder-coat finish outlasts painted tube steel in the alternating wet and dry cycles this region dishes out. Wood gates look right on some of the older homes on the west side, but they need re-sealing every couple of years in this climate.
Trusted Brands We Service in Everman
We install and service gate equipment across nine major brands, and for Everman customers we keep common parts for LiftMaster, DoorKing, and Elite stocked locally so turnaround is days, not weeks. A DoorKing slide operator or an Elite swing arm can usually be swapped within a week of your call because we carry what this area actually uses. For older systems, a Viking board or a Ghost Controls retrofit kit is a phone call away. You get a written price, a real arrival window, and a tech who has worked on your exact operator before they ever step out of the truck.
Common Gate Installation Problems We See in Everman Homes
- Posts heaving out of plumb within a year. Blackland clay expands with spring rain and contracts in the summer heat. Standard concrete tube forms are not deep or wide enough to anchor against that movement, and the gate starts dragging or binding.
- Original 1950s-1980s swing gates failing at the hinges. Most Everman homes still have their original tubular steel or chain-link driveway gates. Decades of daily use in alternating wet and dry Texas cycles have rusted hinges, latches, and drop rods past their useful life.
- Legacy operators with no entrapment protection. Older openers on Everman gates often have no photocells or safety edges. They seize during hard freezes like the February 2021 storm, and they bake out in 100-degree summers, leaving swing and slide gates inoperable.
- Operators sized wrong for the gate. Budget installers sometimes mount a residential arm opener on a heavy steel gate. The motor strips gears in a year. We size the actuator to the gate’s actual weight and cycle count, which matters on homes where the gate opens six or eight times a day.
Pricing for Gate Installation in Everman, TX
A manual driveway swing gate in Everman runs $1,800 to $3,400. Electric swing gate installation runs $2,800 to $5,400. Sliding driveway gates run $3,500 to $7,000. Pedestrian gates, which many Everman backyards already have, run $800 to $2,200 installed. What moves the price: footing depth, gate width and weight, operator brand, whether we run low-voltage wire or go solar, and how much old hardware can be reused. You will receive a written price before any work starts, and that price is what you pay. Call (940) 412-7340 for a free estimate at your property.
We Also Serve Cities Near Everman
Our crews cover Everman and the surrounding Tarrant County area, including major metro work in Houston, San Antonio, Dallas, and Fort Worth. If your property sits just outside Everman, call (940) 412-7340 and we will confirm coverage and a dispatch window.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Everman
Everman sits on the Blackland Prairie clay belt, a soil that swells when wet and shrinks when dry. Standard concrete tube forms are not deep or wide enough to anchor a gate post against that seasonal movement, so even a one-year-old post can heave two inches out of plumb. A proper fix requires a deeper footing below the active clay zone, and a few hundred extra dollars at install prevents the whole problem. Call (940) 412-7340 and we will check what is under your gate.
Yes, in most cases. If the gate frame is still square and the posts are stable, we can pull the old operator, mount a new one, add modern safety photocells and edges, and reprogram your remotes for roughly half the cost of full replacement. If the frame is twisted or the posts are moving, retrofitting is throwing money away. Portcullis will tell you which situation you are in before you spend anything.
Yes. A gate without photocells or safety edges will not reverse if a child, pet, or car is in the path. That is an entrapment hazard and it also leaves the operator vulnerable to damage when the gate hits something. Modern code and basic safety both call for non-contact sensors and a reversing edge. We retrofit these on almost every older Everman opener we touch.
When the post footings have failed and the frame has racked, repair stops making sense. You can keep welding a rusted 40-year-old hinge, but you are paying for the same failure every year. A proper new gate with correct footings typically costs less than three consecutive repair-only years, and it comes with our 365-Day Done Right Promise written on the invoice.
Yes. Many Everman driveways have no electrical line at the gate, so we install solar operators with panels and battery packs sized for the gate’s daily cycle. North Central Texas sun handles the charging demand well, and the cost usually lands between $3,200 and $5,900 for a single swing gate. Call (940) 412-7340 for a written quote.
Call Portcullis Gate Repair for Your Everman Gate Installation
A gate that drags, binds, or quits is not just an inconvenience, it is a security problem on a property you need to control. Whether you need a new driveway gate on a ranch home off Everman Parkway, an electric operator retrofit near the school district side of town, or a solar opener for a backyard entry with no power, we will measure, quote, and install it right. A live person answers our phone 24 hours a day, 7 days a week, including holidays. Call (940) 412-7340 for a free estimate, and you will have a written price before any work begins.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Everman and the surrounding Tarrant County area.