Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Krum
Gate installation in Krum usually means one of two jobs: either you’re putting in an automatic driveway gate on a newer acreage property, or you’re replacing a tired pipe-and-panel ranch gate that’s been leaning since the last wet spring. We’ve worked both ends of that spectrum across Krum for years, and most projects are quoted, scheduled, and installed within one to two weeks. Call (940) 412-7340 for a free measure and a written price before any work starts.
What sets Krum apart from Denton or Argyle is the soil. The shrink-swell clay under this part of Denton County moves with every wet-dry cycle, and that movement ends up in your gate posts. When we build a gate here, we plan the footing for the clay first and the hardware second. It’s the difference between a gate that stays plumb for a decade and one that’s tilted 12 degrees by its third birthday. We’re a Gate Installation team that builds for this ground, not for a generic Texas suburb.
Why Portcullis Gate Repair Is Krum’s Preferred Gate Installation Company
We answer the phone. That sounds small until you’ve spent a Tuesday morning leaving voicemails with three gate companies and hearing nothing back. Portcullis Gate Repair has a live person taking calls 24 hours a day, seven days a week, including holidays. When a Krum homeowner calls about a gate that won’t close or a new installation they’re planning, they talk to a human being who can schedule a measure and give them a rough dollar range on the spot. No callback queues, no “somebody will get back to you.”
Every job we do in Krum follows the Kingswell Guarantee, and it’s worth stating plainly because most people have been burned before. We put the price in writing before a single bolt is turned. We give you a real arrival window, and we show up inside it. We leave the job site cleaner than we found it. And we put the guarantee in writing: 365 days on every repair, with a free return visit if it fails. That’s the Kingswell Way, and it applies to every Portcullis location, including ours here on the Dallas-Fort Worth side. Dean Prescott runs this operation and enforces those commitments personally.
Our techs also know the difference between a swing gate that belongs on a two-acre horse property and a slide gate that has to work inside a tight shared easement. That local knowledge saves Krum customers from paying for a layout that won’t hold up. The crews arrive background-checked and in uniform, and they know the ground they’re digging into.
Electric Gate Installation in Krum
Electric Gate Installation in Krum means pairing a solid gate frame with an operator, safety sensors, and controls that can handle clay heave, livestock, and daily use by trucks and horse trailers. The operator is the motorized box or arm that moves the gate, and the big choice here is swing versus slide. On a flat acreage lot with room to swing a leaf inward, a swing operator makes sense. On a shared driveway with limited run-out, a slide gate tucks along the fence line and doesn’t eat up vehicle clearance.
Most electric driveway gate installations in Krum run $4,800 to $9,500 for a single swing or slide gate with operator, safety photocells, and a keypad or remote. That’s the installed price, not a teaser. Larger double swing gates or heavier ornamental steel run higher, and if the existing posts are shot, footing work adds to it. We quote all of it in writing before we start.
Operators for Krum’s Livestock and Acreage Mix
A surprising number of Krum properties still run a manual pipe-panel ranch gate at the front while the house gate is automated. When both feed the same driveway, we often install one operator that handles the house gate and leave the ranch gate manual but re-hung so it actually latches. If you want both automated, we’ll run the controls so either gate can be operated from the same remote without cross-triggering.
Safety Sensors on Krum Driveways
Texas code and common sense both require photocells and entrapment protection on any automatic gate. On Krum’s gravel drives, the photocells take a beating from dust and mower clippings, so we set them at heights that stay clear of debris and test them under full sun. A gate that reverses when it shouldn’t is just as dangerous as one that doesn’t stop when it should.
Driveway Gate Installation in Krum
Driveway Gate Installation in Krum covers everything from a simple single swing gate on a residential lot to a 16-foot slide gate across a shared easement serving two or three homes. The job starts with the footing, because that’s where Krum gates live or die. We dig past the organic topsoil into stable clay, bell the bottom of the hole so the concrete can’t lift with soil movement, and set posts in concrete that cures before the gate goes on. That’s not an upgrade here. It’s the minimum that works.
A single driveway swing gate with a basic operator and remote typically runs $3,800 to $6,200 in Krum. A slide gate with rack and pinion drive, suitable for long or sloping drives, runs $5,500 to $8,800. Heavier ornamental steel or custom widths push those numbers upward. The written quote includes excavation, concrete, posts, the gate panel, the operator, the sensors, and the remote programming.
Shared Driveways and Rights of Way
Krum has a lot of shared driveways, especially in the acreage subdivisions where two or three houses feed off one easement. A gate built across a shared drive has to work for every household, and that means the controls, the remotes, and the access schedule all need to be agreed on before we dig. We’ll stage materials on the shoulder and keep the drive passable the whole day. We’ve done installs on Bounded Oak in the newer section north of town where the mail carrier, a horse trailer, and three different pickup trucks all kept moving while we set a 16-foot LiftMaster slide gate on a rebuilt footing.
Pedestrian Gates Beside the Drive Gate
When the drive gate closes, people still need to walk through. On Krum properties where the house sits well back from the road, we often install a separate pedestrian gate beside the main drive gate so packages, kids, and farmhands don’t have to open a 14-foot leaf just to step through. These go in for $900 to $1,800 depending on width and hardware, and they save the operator from needless cycles.
Trusted Brands We Service in Krum
We install and service nine major gate-operator brands, and on Krum jobs we most often work with LiftMaster for slide gates on acreage lots, Viking for heavier swing gates, and Linear when a homeowner wants simple, dependable controls. DoorKing and Ghost Controls come up on ranch properties where the owner wants a solar-capable operator without running conduit back to the house. We keep common parts for these brands in our Dallas-Fort Worth stock, so a failed circuit board or a worn limit switch doesn’t mean waiting a week for a shipment. If you already own one of these operators and it’s binding on a leaning post, we can usually rebuild the footing and keep the existing motor in service.
Common Gate Installation Problems We See in Krum Homes
- Builder-era posts leaning 10-15 degrees. Many automatic driveway gates installed during Krum’s post-2015 building boom were set by general contractors who buried posts at standard depth without concrete bell-bottoms. Two or three years of Denton County clay heave later, the post has rotated and the gate no longer aligns with the latch or the operator.
- Swing gate leaves dragging the ground on shared drives. Older pipe-and-panel ranch gates on hinged posts pull out of plumb in the shrink-swell clay, dropping the panel until it scrapes gravel and stops latching. That’s usually a post problem, not a panel problem, and replacing the hinges without resetting the post just repeats the cycle.
- Slide gates without enough run-out. Narrow acreage lots often have a slide gate installed with barely enough rail behind the opening for the gate to fully retract. When a long truck or horse trailer needs the full width, the operator strains, trips entrapment faults, and eventually strips the rack or burns the motor.
- Straight-line winds bending lightweight panels. Krum sits in a corridor for strong southwest thunderstorm winds. Unsecured swing gate leaves get blown off hinges, and lightweight panel frames get bent enough that the gate won’t cycle. If the photocells aren’t working, the operator keeps trying to move the damaged panel and damages itself in the process.
Pricing for Gate Installation in Krum, TX
A full driveway gate installation in Krum, including the gate panel, posts, concrete footings, operator, safety sensors, and one remote, runs roughly $3,800 to $9,500 depending on whether it’s a single swing, double swing, or slide configuration. Pedestrian gates add $900 to $1,800. Footing reconstruction, which is common here because of clay-driven post heave, adds $700 to $1,500 per post depending on depth and concrete volume. If an existing operator can be saved, we’ll tell you that rather than sell you a new one. Every price is written down before work starts, and that written price is what you pay. Call (940) 412-7340 for a free measure and an exact quote for your gate.
We Also Serve Cities Near Krum
Our crews run gate installation jobs in Krum and the surrounding Denton County communities of Sanger, Denton, Argyle, and Aubrey. If your property sits out toward the Sanger line or down toward the Argyle side, we’re already working that ground. Learn more about our local service at Gate Installation in Krum or call for a measure anywhere in the area.
Serving Krum, TX - Our Local Coverage Area
We’re based in the Krum area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Krum
Because the original builders set the posts at standard depth without clay-specific concrete bell-bottoms, and Krum’s shrink-swell clay pushes them out of plumb within two or three years. The fix is a footing reconstruction: drill deeper, bell the bottom of the hole, pour concrete that locks into stable soil, then re-hang the gate. Call (940) 412-7340 for a free look at your posts.
Yes. We stage all materials on the shoulder or in a corner of the easement, keep the drive passable throughout the install, and often recommend a slide gate rather than a swing gate when run-out space is tight. Every household that uses the drive gets remotes and the access schedule is set up before we dig.
In Krum it’s almost always the post. The clay heaves, the hinge post rotates, and the panel drops until it scrapes the ground. We reset the post in a belled footing and re-hang the existing panel when it’s still sound, which is cheaper than replacing the whole gate. If the panel is bent or rusted through, we’ll quote a replacement separately.
We install and service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Krum’s mix of acreage driveways and ranch gates, we most often recommend LiftMaster for slide gates, Viking for heavy swing gates, and Linear for straightforward residential systems. The choice depends on your gate weight, cycle count, and whether you want solar capability.
Yes. Every automatic gate operator in Texas requires entrapment protection, which means photocells or contact edges that stop and reverse the gate if something is in the path. We install and test the sensors on every job, and the written guarantee covers them for 365 days under the Kingswell Done Right Promise. Call (940) 412-7340 to schedule a measure and get a written quote.
Get Your Krum Gate Installation Started
If you’re tired of a gate that drags, a post that’s leaning, or a driveway that stays wide open because the old operator finally quit, we’ll come measure it and put a price in your hand. Free estimate, written quote, no obligation. Call (940) 412-7340 and talk to a live person, any hour, any day.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Krum and Denton County since 2008.