Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Roanoke
Gate installation in Roanoke, TX typically starts around $1,800 for a basic single swing gate with a manual closer and runs $4,500 to $9,500 for an automated ornamental iron driveway gate with keypad, safety sensors, and vehicle loop detection. Most jobs are completed in one to two days, depending on concrete cure time and the size of the gate. We’ve worked Roanoke’s subdivisions long enough to know which parts of this town fight you on a gate install, and we plan for it before the first hole is dug.
If your gate is sagging, binding, or simply rusted past saving, call Portcullis Gate Repair at (940) 412-7340. We’ll come out, measure, and put the price in writing before any work starts.
Why Portcullis Gate Repair Is Roanoke’s Preferred Gate Installation Company
Roanoke homeowners keep calling us back because we show up when we say we will and the price we quote is the price on the invoice. Dean Prescott runs our Portcullis location, and he’s held every Roanoke job to the Kingswell Guarantee since day one: a written price before the work, a real arrival window, a clean job site, and a written guarantee on the installation. No no-shows, no surprise add-ons at the door.
We work throughout Roanoke regularly, from the Fairways off Avondale-Haslet Road to neighborhoods along Bonds Ranch Road and up toward the Alliance corridor. That local route knowledge means we can usually schedule an install within a few days of your call, not three weeks out. Every technician arrives background-checked and in uniform, and every call to us is answered by a live person, any hour of the day or night.
What sets us apart in Roanoke specifically is that we know the soil under your property. The Blackland Prairie clay here doesn’t behave like the sandy loam you’ll find in other North Texas towns, and we build for that. More on that below.
Gate Installation Services in Roanoke
Gate Installation Services in Roanoke cover everything from a simple pedestrian gate in a side yard to a full automated driveway gate with operators, keypads, and vehicle detection. Most Roanoke jobs involve ornamental iron or steel swing gates on HOA-governed lots, where the gate has to match the neighborhood aesthetic and work reliably every day. A typical ornamental iron swing gate install in Roanoke runs $2,800 to $6,500, depending on width, automation, and site conditions.
Driveway and Swing Gates
Driveway gates in Roanoke are almost always swing gates, and a double swing gate across a wide driveway typically runs $4,500 to $9,500 installed with an operator. We spec the hinges, post sizes, and footing depths for Roanoke’s soil, not for a generic Texas lot. That means deeper post holes and wider concrete footings, which is the difference between a gate that stays square for a decade and one that binds by September.
Sliding Gates for Tight Sites
Not every Roanoke lot has room for a swing arc. Along Avondale-Haslet Road and in older sections of town, driveways run close to property lines and shared easements, and that means a sliding gate is the only practical option. Sliding gate installation in Roanoke runs $3,500 to $8,000, with the rack-and-pinion drive and operator enclosure eating up most of the parts cost. We’ll measure your side clearance before recommending anything.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Roanoke
Electric Gate Installation in Roanoke means adding an automated operator to a new or existing gate, and it’s the part of the job where most companies cut corners and homeowners pay for it later. We handle the full electrical scope: operator mounting, control board installation, safety photocells, vehicle loop detectors, and keypad programming. Electric gate installation in Roanoke runs $1,200 to $4,000 on top of the gate itself, depending on operator brand and how far the power needs to travel.
Operators and Automation
We install and service operators from LiftMaster, FAAC, BFT, Linear, and Viking, and we stock replacement parts locally for Roanoke-area jobs. If your operator fails inside the 365-Day Done Right Promise window, we come back and fix it at no charge. That’s not a phone promise – it’s written on the invoice.
Safety Systems That Actually Work
Every automated gate in Roanoke should have a properly placed set of photo-eyes and a vehicle loop detector sized for the driveway. On narrow shared driveways off Avondale-Haslet Road, we set the loop below the drive apron so it picks up a car without false-triggering on the neighbor’s side. A rushed photocell placement is dangerous; we take the time to get it right, and we keep a temporary pedestrian path open while we work.
Trusted Brands We Service in Roanoke
We carry and install FAAC, BFT, Linear, and Viking operators, along with LiftMaster and other major brands. Because we service these systems across Roanoke every week, we keep common parts on the truck, so a bad control board or a failed limit switch doesn’t mean waiting a week for a shipped part. If you already have a brand preference or an operator that’s still under manufacturer warranty, we’ll work with it. Call (940) 412-7340 and tell us what’s on your gate.
Common Gate Installation Problems We See in Roanoke Homes
- A brand-new swing gate binds at the latch by late August. Blackland Prairie clay shrinks in summer drought and the post footing tilts, throwing the gate out of alignment within months of install. We oversize the footings on every Roanoke install to slow this down.
- Shared driveways with almost no side clearance. Along Avondale-Haslet Road, we see easements and shared drives where a swing gate physically cannot open without crossing a neighbor’s property. That means a sliding gate with rack and pinion, and we plan the operator enclosure space before ordering parts.
- A rushed install leaves the driveway unusable half the day. Homeowners keep needing in and out during the work, so the temporary pedestrian gap and the safety photocell placement get rushed. We set up a temporary walk path and never leave the driveway blocked overnight unless we’ve told you in advance.
- Undersized loop detectors on wide drives. A vehicle loop that’s too small or placed wrong misses motorcycles and trailers, or false-triggers when the neighbor’s car passes. On Roanoke’s wider double drives, we size the loop to the actual apron width and test it before we leave.
Pricing for Gate Installation in Roanoke, TX
Here’s what you can expect to pay in Roanoke for common installations:
- Single ornamental iron swing gate, manual: $1,800-$3,200
- Single swing gate with operator, keypad, and photocells: $4,500-$6,500
- Double swing gate with automation: $5,500-$9,500
- Sliding gate with rack and pinion and operator: $3,500-$8,000
- Pedestrian gate with keypad access: $900-$1,800
- Operator only, installed on existing gate: $1,200-$2,600
Footing depth, concrete volume, site access, and power-run distance all move the number. We give you a written quote before any work begins, and that price is locked – no invoice surprises at the end of the job. Call (940) 412-7340 for a free estimate on your Roanoke property.
We Also Serve Cities Near Roanoke
Our Gate Installation team covers the whole Roanoke area, and we regularly work in Flower Mound, Southlake, Argyle, and Keller. If you’re in one of those cities or anywhere nearby in Gate Installation in Roanoke territory, give us a call and we’ll get you on the schedule.
Serving Roanoke, TX - Our Local Coverage Area
We’re based in the Roanoke area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Roanoke
Yes, but the design has to account for the shared easement. In most cases, a sliding gate is the right answer because it doesn’t swing into either property. We’ll survey the drive, check the easement width, and spec a gate that leaves both parties clean access. We also coordinate with your neighbor if needed. Call (940) 412-7340 for a site visit and a written quote.
Blackland Prairie clay under Roanoke shrinks hard in summer, and the post footing tilts with it. A gate that was plumb at install binds at the latch or drags on the pad within one season. The fix is a deeper, wider footing than the manufacturer default, which we include on every new Roanoke install. For an existing gate, we can re-plumb the posts and re-calibrate the operator. Call us before the drag turns into a broken hinge.
Yes. UL 325 safety standards require entrapment protection on any automated gate, and Roanoke’s HOA communities generally enforce that through the builder’s original specs. We install photo-eyes on every automated gate regardless of street traffic, and we position them so they don’t false-trigger on dogs, blowing leaves, or the neighbor’s car. The difference is placement, not whether they’re there.
Sustained 100-degree days bake the control board enclosure and degrade wiring insulation faster than the manufacturer rates suggest. Battery backups die early too. When we install in Roanoke, we use a ventilated or shaded enclosure where the site allows and recommend surge protection on the power feed. If you’ve got an existing operator that’s failing in summer heat, it’s often the board or the battery, both of which we replace. Call (940) 412-7340 and describe what you’re seeing.
Plan on one full day of driveway blockage while we set posts and pour footings, and another day for operator mounting and wiring. Concrete needs to cure before we hang a heavy iron gate on it, and curing takes time. We set up a temporary pedestrian path with a safety photocell so you can still walk out, and we’ll tell you exactly when the driveway will be fully open again. The quote includes a schedule, not just a price.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Roanoke since 2008.