Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Keller
Gate installation in Keller costs between $2,400 and $9,800 for most residential projects, with custom iron driveway gates on acreage lots running higher. We’ve worked Keller’s newer western tracts and its established 1990s subdivisions long enough to know which jobs go smoothly and which ones hide problems under the soil line. If you’re on the fence about a new driveway gate or replacing one that’s been sagging for years, call (940) 412-7340. We’ll give you a written price before any concrete gets poured or any bolt gets turned.
Why Portcullis Gate Repair Is Keller’s Preferred Gate Installation Company
Keller homeowners don’t call us because their gate is a minor convenience. They call because the gate is part of how the property works every single day: it lets the horse trailer out, keeps the dogs in, and closes off the driveway from the road. When it fails, the whole routine stalls. We show up in a real arrival window, we show up in uniform, and we put the price in writing before work starts. That’s not marketing language. That’s the Kingswell Guarantee, and it’s stamped on every invoice we hand to a Keller customer.
Unlike companies that rotate through unfamiliar techs, our crews work Keller specifically. We know the neighborhoods off Keller-Smithfield Road, the acreage stretching toward Westlake, the gated entries in Hidden Lakes and Twin Creeks, and the older custom homes along Bear Creek. Same-day estimate requests get answered by a live person, not a callback queue. And our 365-Day Done Right Promise means if a new installation fails within a year, we return and fix it at no charge. Dean Prescott, who leads our gate team, insists on that standard for every job: written price, clean work area, written guarantee.
Driveway Gate Installation in Keller
Driveway Gate Installation in Keller almost always means a gate on a long approach, not a short urban driveway. That’s a difference worth understanding. The typical Keller driveway gate is a welded ornamental steel swing or slider, 14 to 20 feet wide, set back maybe 40 to 120 feet from the residence. Our work here falls into two broad paths: replacing a 1995-2010-era gate that’s rusted or sagging out of square, or building fresh for a new custom home or a property that never had a gate. A standard steel swing gate with operator on an existing concrete driveway in Keller generally runs $2,400-$4,600. A wide double-swing or heavy slider with new posts and a new operator typically lands between $5,500 and $9,800, depending on span and post depth. Every quote is a written number, not a handshake estimate.
Post Footings That Survive Keller Soil
The single biggest avoidable failure in Keller driveway gates is a post set in a hole too shallow for our clay. We bury posts below the shrink-swell zone and reinforce the footing so Blackland Prairie clay has less leverage against them. It adds a day to some installs. It’s the difference between a gate that stays plumb and one that starts binding in eighteen months.
Operator Right-Sizing for Long Runs
A gate 500 feet from the house needs more than a doorbell transformer and some low-voltage wire. We often recommend solar systems on Keller acreage because mains power gets expensive past about 150 feet of trench, and a 20-foot iron gate needs real torque to move it up a slight grade. We size the actuator, the motorized arm or gearbox that pushes the gate, to the actual gate weight and wind load. Undersized operators are a recurring issue with older Keller installs.
Sliding Gate Installation in Keller
Sliding Gate Installation in Keller is the default choice where a swing gate would eat too much driveway or where the ground slopes the wrong way. Keller’s western reaches, especially once you get toward the Denton County line, include properties with horse trailers, farm equipment, and long gravel approaches where a slide gate is the only sensible design. A single-leaf sliding gate in Keller for a standard driveway typically costs $3,200-$5,600 installed depending on length and operator. A heavier V-track or cantilever slide for a wider, taller opening can run $6,500-$11,000. We build the track to hold up under Keller freeze-thaw cycles and clay heave, and we match the motor to the gate’s weight, not the gate’s cheapness.
Cantilever vs. V-Track Slides
If the approach has no curb but carries gravel or mud, we often recommend a cantilever slide. It carries its own weight on rollers above the ground, so there’s no bottom track to clog with clay or freeze shut. V-track slides are cheaper to build but need a clean, well-drained track bed; on some Keller properties the soil just doesn’t allow that without constant maintenance. We’ll tell you straight which one fits your site.
Solar Slides for Acreage
When a slide gate sits far from the main panel, running 120-volt power means trenching under driveways and through clay for hundreds of feet. A solar gate opener costs less on the electrical side and works well with Keller’s long sunny stretches, though we size the battery bank for a few grey February days in a row. We install the panel, battery, and operator as one matched kit and set it up to handle the colder weather Keller gets every few winters.
Trusted Brands We Service in Keller
We install and service LiftMaster, FAAC, BFT, Linear, Viking, and Ghost Controls operators in Keller homes. Many of the gates we replace were built with Viking or Linear openers originally, and owners call us because those units finally gave out after 15 or 20 years of Texas heat and ice. We stock common control boards, photo-eyes, and remotes for Keller jobs, so a replacement doesn’t wait on a ground shipment. If your existing operator is a brand we carry, we can usually swap it and keep the gate itself when the gate’s still in good shape. Dean has had his crews certified across these brands, so a tech doesn’t sit in the driveway reading a manual for the first time.
Common Gate Installation Problems We See in Keller Homes
- Posts pushed out of plumb by Blackland Prairie clay. North Texas soil swells when wet and cracks when dry, and it does this every single year. Over time it torques gate posts just enough that a swing gate starts scraping its latch or binding at the hinge. The fix is a deeper, wider footing and a reset post, not just a fresh coat of paint.
- Undersized operators on western acreage farm-style gates. We see two-gate setups where one iron pedestrian gate and one heavy farm slide gate share a single opener that was too small from day one. The motor overworks in summer heat and dies every two to three years. We split the loads or install a properly sized operator for the heavy gate.
- Operator damage from Keller ice storms. February 2021 wasn’t a one-off in Keller. Freeze-thaw cycles crack circuit boards and split hydraulic arm seals, and we see a surge of these calls every time the ice clears. Installations we do now include sealed enclosures and surge protection for that reason.
- Gates racking out of square on aging custom homes. Keller’s 1993-2010 custom-home gate wave is aging all at once. The ornamental iron from that era was often mounted on posts set shallow, and 20 years later the gate has pulled itself out of square. It’s not operator failure, it’s structural drift, and it’s the most misdiagnosed gate problem in Keller.
Pricing for Gate Installation in Keller, TX
Here are the numbers we quote on Keller jobs, in writing: standard driveway swing gate with one new steel gate and a LiftMaster or Linear operator runs $2,400-$4,600. Double swing gates on wide driveways, $4,200-$7,800. Sliding gates with new track and operator, $3,200-$5,600 for standard, up to $11,000 for wide or heavy cantilever designs. Solar operators add $800-$1,900 depending on panel and battery capacity. New post footings on clay soil typically add $400-$1,200 per post for deep excavation and reinforced concrete. Every quote is a line item with parts, labor, and the Operator specified. You approve it before work starts. No open-ended hourly billing. Call (940) 412-7340 and we’ll walk the property and hand you the written price the same visit.
We Also Serve Cities Near Keller
Our gate installation crews work across the Tarrant County line and into Denton County: Haslet, North Richland Hills, Roanoke, and Southlake. If you’re in Keller itself, we’re usually on your driveway within a day or two for an estimate. For a broader look at our work, visit our Gate Installation service page or our Keller area page.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Keller
Because the problem is usually your post, not your motor. Keller’s clay soil expands and contracts with every wet spring and dry summer, slowly tilting gate posts out of plumb. That tilt makes the gate rack and bind at the hinge or latch, and a quick operator adjustment won’t fix it. The real repair is resetting the post in a deeper, wider footing. Call (940) 412-7340 for a written quote on post correction before the gate damages the operator.
Yes. We install solar gate openers on properties where running 120-volt mains would mean hundreds of feet of trench across lawn, gravel, or driveway. The system uses a solar panel, a deep-cycle battery, and a DC operator sized to your gate. We design for a stretch of cloudy winter days, not just July sun. Solar adds about $800-$1,900 to a Keller installation depending on panel and battery size.
Usually yes. One operator driving two gates of very different weight nearly always ends with the motor overloaded, and we see the same Keller addresses every two or three summers with a burned-out unit. The fix is either a separate operator for each gate or a correctly sized operator running the heavy slide while the pedestrian gate gets its own. We’ll evaluate the setup and write the solution out, price included, before work begins.
Keller takes ice storms seriously, and gate manufacturers’ circuit boards and hydraulic seals do not. We install with sealed, insulated enclosures and surge-protected wiring because we’ve seen too many February failures strip a controller clean. Our installations account for freeze-thaw cycles, not just Keller’s normal heat, so the gate survives a 2021-style event without needing a new board the next week.
Yes. Automatic gates in Keller must meet UL 325 safety standards, which include photo-eye sensors to stop the gate if something crosses its path, adjustable force settings so the gate reverses on contact, and warning signage. Every new installation we complete is tested for these before we call the job done. It’s not an upsell; it’s the law, and it’s designed to keep kids and pets from getting hurt.
Contact Portcullis Gate Repair in Keller
We’re already in Keller most days of the week, and we answer the phone around the clock. You’ll get a real person, a real arrival window, and a written price you can hold us to. That’s the Kingswell Way and it’s the only way we work. For a free estimate on a new driveway gate, sliding gate, or full gate system replacement in Keller, call (940) 412-7340 today.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Keller and the surrounding Tarrant County area.