Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Keller, TX
Keller’s gate repair needs run a little different from the rest of the DFW metro. The city’s build-out between roughly 1993 and 2010 left behind hundreds of large-lot executive homes, most of them with ornamental iron swing or slide gates now hitting 20-plus years of service. Between the Blackland Prairie clay heaving posts out of plumb and operators that were sized for a lighter gate than what got hung, the calls we take from Keller tend to involve realignment and motor strain more than outright mechanical failures. We’re Portcullis Gate Repair, and you can reach a live person at (940) 412-7340 any hour, any day.
Why Keller Homes Are Different
Keller wasn’t built like its neighbors. While Southlake and Colleyville saw a slower drip of high-end construction, Keller added thousands of custom and semi-custom homes on half-acre to multi-acre lots in a concentrated push through the 1990s and 2000s. A large share of those properties came with privately gated driveways from day one: ornamental wrought-iron or tubular steel gates running Viking, LiftMaster, or Ghost Controls operators installed during original construction. That volume means something practical for anyone living here now: a lot of the gate hardware in Keller is aging on the same timeline, and we’re seeing the same end-of-life failures crop up block by block rather than house by house.
The clay does the rest. Keller sits on the same black gumbo that torments every foundation in Tarrant County. Wet springs swell it, summer droughts contract and crack it, and gate posts set in that soil get torqued and tilted season after season. When a post moves even an inch out of plumb, the gate leaf racks out of square and starts binding on its hinges or dragging its track. We see that pattern more than any single mechanical breakdown in Keller. Winter ice storms, like the February 2021 event, deliver a second kind of damage: frozen operator circuit boards and cracked hydraulic arm seals. After a hard freeze, the phone rings with a wave of boards and seals that failed in the same week.
Out in the western acreage tracts toward Westlake and the Denton County line, a different setup shows up repeatedly. Many of those properties pair a decorative iron pedestrian gate with a heavy automatic farm-style slide gate built to pass a horse trailer. The two systems often share a single operator that was undersized at installation, and that motor gets asked to do too much work every open and close. When it burns out, it burns out in summer. We’ve been back to some of those same addresses two or three times over the span of a few years, not because the repair failed, but because the original sizing never matched the gate it was driving.
Our Main Keller Services
The two calls that keep our Keller schedule fullest are misaligned or binding gates in need of repair, and motors or control boards that need electrical diagnosis. Each service has its own Keller page with pricing and details; here’s the short version.
Gate Repair in Keller
Most Keller gate repair calls start with a gate that won’t close fully or drags against the post on one side. The usual cause is post movement from the clay soil, and the fix involves re-plumbing the post or re-shimming hinges rather than replacing the whole gate. We carry hardened steel shims and replacement hinge sets sized for the heavy ornamental gates common in Keller’s subdivisions, and the work is quoted in writing before any bolt gets turned. Details and pricing are on the Gate Repair in Keller page.
Gate Installation in Keller
New gate installation in Keller usually means matching an existing fence line, whether that’s ornamental iron, tubular steel, or a heavier ranch-style slide gate on the western acreage. Because Keller posts sit in expansive clay, we set and pour new posts deeper than the frost line and use concrete collars sized for the soil movement. Every installation includes a written quote covering materials, labor, and operator wiring before any work begins. Read the full breakdown on the Gate Installation in Keller page.
Electric Gate Repair in Keller
Electric gate failures in Keller fall into two camps: control boards that died after a winter freeze or a power surge, and motors that have been overworked on undersized gates in the western acreage. We stock replacement boards and actuator arms for the operator brands most common in Keller, and our technicians arrive with the diagnostic equipment to test limit switches, photo eyes, and motor draw on site. The full scope and pricing are on the Electric Gate Repair in Keller page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Keller
We repair and replace operators from FAAC, BFT, Linear, and Viking, among others. Parts for these brands are stocked at our DFW dispatch office, so Keller customers typically wait a day or less for common boards and actuators rather than a week on a freight truck. Our training covers the full lineup listed on our brands page.
Pricing for Gate Company in Keller, TX
| Service | Typical range in Keller |
|---|---|
| Post re-plumb and re-shim (binding gate) | $275-$680 |
| Hinge replacement set (ornamental iron gate) | $220-$450 |
| Track and roller replacement (slide gate) | $340-$720 |
| Operator motor replacement (single swing gate) | $520-$1,050 |
| Operator motor replacement (heavy slide gate) | $780-$1,520 |
| Control board replacement | $310-$690 |
| Photo eye or safety edge replacement | $160-$340 |
| Hydraulic arm seal replacement | $280-$520 |
| Limit switch adjustment or replacement | $130-$290 |
| Service call and on-site diagnosis | $85-$140 |
What pushes a Keller job toward the top of those ranges is usually clay-related post damage that requires re-setting concrete, or an operator that was undersized at installation and needs a heavier replacement. Whatever the number is, you’ll see it in writing before any work starts. The price we quote is the price on the invoice.
Neighborhoods We Serve in Keller
We run calls across Keller regularly, from the established subdivisions east of US-377 to the newer acreage tracts on the western edge toward Westlake. Response time across the Keller area is typically same-day or next-morning for non-emergency calls, with emergency dispatch available around the clock for a gate that won’t close and secure.
- Hidden Lakes
- Marshall Ridge
- Sarah Brooks Estates
- Falcon Ridge
- The Parks at Keller
Service Area – Cities Near Keller
Our Keller crews also cover the surrounding cities in northeast Tarrant County and southern Denton County. If your property is just outside the Keller city limits, one of these pages may put you in our coverage area: Haslet, TX, North Richland Hills, TX, Roanoke, TX, or Southlake, TX.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Keller
Most Keller addresses get same-day or next-morning service for non-emergency calls. If your gate is stuck open or won’t close and secure, we run emergency dispatch around the clock. Call (940) 412-7340 and you’ll speak to a live person, not a voicemail tree.
Some of Keller’s larger subdivisions enforce design standards for driveway gates, so it’s worth checking your HOA’s guidelines before changing the gate style or finish. Repairs to an existing gate that keep the same footprint and appearance rarely need approval. We can note any HOA requirements on your written quote if you flag it when we arrive.
Yes. We service properties across Keller, from the original subdivisions to the rural-transitional tracts near Westlake and the Denton County line. Those western properties often have heavier slide gates and we schedule them with the time and equipment they require.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Keller Customers Say
"Our driveway gate stopped halfway and wouldn't close, which is a problem when it's the only thing between the street and the yard. They came out same day, replaced the motor, and it's smooth again."
- Leonard Pace"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike