Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Keller
Electric gate repair in Keller, TX usually costs between $220 and $480 for a typical service call, and most jobs are done in one visit. If your gate motor is dead, your keypad won’t respond, or your swing gate is binding on its hinges, we can dispatch a uniformed technician to your Keller property fast. Call (940) 412-7340 and you’ll get a live person, not a voicemail tree.
Why Portcullis Gate Repair Is Keller’s Preferred Electric Gate Repair Company
We’ve worked on enough older Keller gates to know what’s actually failing before we even pull into the driveway. The Blackland Prairie clay under this city heaves every spring and contracts every drought, and the gate posts move with it. A gate that looks like a motor failure is often a hinge post that’s tilted a quarter inch out of plumb. That’s the kind of local knowledge that keeps us from selling you a new operator when the real fix is resetting the post. Keller homeowners call us because we say the price before we touch a single bolt, and that price is the same when the invoice comes. Every repair gets a written Kingswell Guarantee, and every technician is background-checked and in uniform. Dean Prescott leads our team, and he’s built Portcullis around one idea: a repair that fails six weeks later isn’t a repair. That’s why every job carries the 365-Day Done Right Promise. If it fails inside a year, we come back and make it right at no charge.
Electric Gate Motor in Keller
An Electric Gate Motor replacement in Keller is one of the most common calls we make, especially on the acreage lots west of town where a single motor is often doing double duty. The motor, or actuator, is the workhorse of your gate system. When it’s sized correctly and the gate is moving freely, it will run quietly for years. When it’s undersized or the gate has started binding from post movement, it burns out fast. In Keller, a straight motor swap on a standard ornamental swing gate typically runs $350 to $650 parts and labor. On wider farm-style slide gates, where the motor has to be heavier and the drive rack often needs attention too, expect $600 to $1,100.
Symptom: motor laboring or buzzing without movement
We hear this a lot on long Keller driveways where the gate leaf is heavy and the operator was spec’d for something lighter. The motor tries to move the gate, can’t, and the capacitor or winding fails. We’ll check the gate’s free movement before we ever condemn the motor, because a binding hinge makes every motor look bad.
When the motor is fine but the gate still won’t open
This is frustrating. The motor hums. Nothing moves. In older Keller subdivisions built in the 1990s and early 2000s, the culprit is often a failed limit switch or a stripped drive gear inside the operator head, not the motor itself. We repair what’s actually broken and put the real diagnosis in writing before any work starts.
Gate Access Control in Keller
Gate Access Control on a Keller property is often more than a keypad, and the older the gate, the more points of failure there are. Access control is the umbrella term for every way you tell your gate to open: keypads, remote transmitters, intercoms, phone apps, loop detectors, and hard-wired call boxes. On acreage gates west of Keller toward Westlake, we also see solar-powered access systems where running conduit from the house isn’t practical. A full access control refresh on a residential Keller gate, swapping out a dead keypad and adding a new receiver and two remotes, usually runs $280 to $520. Adding a phone-based controller and app is more, typically $750 to $1,300 installed.
Keypads and remotes for Keller driveways
Weather in Tarrant County is hard on outdoor electronics. Keller’s summer heat plus the occasional winter ice storm means keypads crack, membranes fail, and remote transmitters just stop pairing. We stock replacement parts locally for the major brands Keller homes were built with, so we’re not waiting a week for a part to ship from a distributor.
Solar power for rural and acreage gates
Many Keller properties west of Highway 377 don’t have line voltage at the gate. A properly designed solar setup works, but it has to be sized for the actual gate load. When a solar panel is too small or the battery has been cooked by North Texas heat, the gate works for six months and then quits. We size solar arrays and batteries to the gate and the operator, not to a generic chart.
Trusted Brands We Service in Keller
We carry parts and service experience for the operators Keller homes actually have. That includes Viking, the name we see most often on the ornamental driveway gates installed during Keller’s 1990s and 2000s build-out, along with FAAC hydraulic operators common on the heavier slide gates, and Linear and BFT on many of the newer installs. Our technicians are trained across nine major gate-operator brands, so the person who shows up at your Keller gate already knows your system’s wiring and failure points. That means fewer return trips and a repair that’s done right the first time.
Common Electric Gate Repair Problems We See in Keller Homes
- Binding swing gate from clay heave. The Blackland Prairie clay under Keller expands in wet springs and shrinks in summer droughts, tilting hinge posts season after season. The gate racks out of square and binds on its hinges, and the motor gets blamed for a problem that’s actually structural.
- Oversized gate load on an undersized operator. We see this repeatedly on acreage properties toward Westlake and into Denton County, where one operator was installed to run both a farm-style slide gate for horse trailers and an ornamental pedestrian gate. The motor burns out every two or three summers because it was never sized for the combined load.
- Circuit board failure after winter ice. The February 2021 ice storm was brutal on Keller’s gate electronics, and every freeze since then brings a smaller wave of the same failures. Ice cracks solder joints and condensation corrodes control boards, so gates that ran fine in December are dead in February.
- Dead keypads and receivers from heat exposure. Keller’s summers sit in the high 90s for weeks on end, and gate electronics take that much UV and heat. Keypad membranes crack, remote transmitters lose their rubber seal, and receivers fail. We stock replacements locally so the fix doesn’t wait on shipping.
Pricing for Electric Gate Repair in Keller, TX
Here’s what Keller homeowners can expect to pay for common electric gate repairs. A service call and diagnostic on a standard residential gate runs $95 to $150, and that fee is credited toward the repair when you proceed. Gate motor swaps run $350 to $650 for standard swing gates and $700 to $1,200 for heavier slide and acreage gates. Keypad replacement runs $140 to $260. Safety photocell installation runs $180 to $300 per pair. Control board replacement runs $300 to $700 depending on brand. Every price is written down before we start, and it does not change after the work. Call (940) 412-7340 for a free estimate over the phone.
We Also Serve Cities Near Keller
Our Electric Gate Repair team serves Keller and the surrounding communities, including Haslet, North Richland Hills, Roanoke, and Southlake. If your property sits on the edge of Keller and the next town over, we’re still your local crew. We’re also your go-to for Electric Gate Repair in Keller and the acreage west toward Westlake.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Keller
Oiling the hinges rarely fixes the binding because the real problem is usually the post moving underneath the hinge. Keller sits on Blackland Prairie clay, which swells in wet weather and shrinks in drought, tilting the hinge post out of plumb until the gate leaf racks and binds. The fix is resetting the post in new concrete with proper footings. Call (940) 412-7340 and we’ll confirm the post movement before quoting the repair.
Yes, and many properties west of Highway 377 already do because line voltage at the gate is impractical. But the solar panel and battery have to be sized for the actual gate load and the operator’s draw, and North Texas summer heat shortens battery life faster than the manufacturer’s spec sheet says. We size solar systems to the real gate, not a chart. Call (940) 412-7340 for a free evaluation.
Not necessarily. Ice storms, the kind Keller saw in February 2021, crack control boards and weld moisture into relays long before they kill a motor. The motor may be fine while the board is fried. We diagnose before we replace, and every repair is covered by the 365-Day Done Right Promise. Call (940) 412-7340 for a same-week service appointment.
If one operator is running both a farm-style slide gate and an ornamental pedestrian gate, it’s probably undersized for the combined load. That’s a pattern we see repeatedly on acreage lots toward Westlake, where the motor was spec’d for a walk gate and then asked to drag a horse-trailer gate too. We split the load onto a properly sized operator so the motors stop dying. Call (940) 412-7340 to have your setup assessed.
Yes. Any automated gate in Keller that can close on a child, a pet, or a car needs safety photocells, and Texas building codes that adopted UL 325 standards require them on new gate installations. If your gate doesn’t reverse when it hits an obstruction, the photocells are either missing or failed, and that’s a safety repair we’ll flag before we do anything else. Call (940) 412-7340 for a safety check and a free estimate.
Written by Dean Prescott, Owner at Portcullis Gate Repair, a Kingswell company serving Keller, TX.