Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across West Hollywood
A new driveway or pedestrian gate in West Hollywood typically runs $2,800 to $9,500 for fabrication and installation, with most automatic swing-gate systems on standard residential lots landing between $4,200 and $7,800. That includes the gate itself, the operator, the posts, and the safety equipment wired and tested before we leave. Steep hillside lots above the Sunset Strip, common in West Hollywood, push toward the higher end because the post footings and operators have to be sized for a grade that punishes standard hardware.
We know West Hollywood’s streets, its housing stock, and the particular way a gate fails here. When you call Portcullis Gate Repair at (940) 412-7340, you get a live person, a written price before any work starts, and a technician who already understands what a 1930s Spanish Colonial gate on a Sunset Plaza Drive grade needs. No call center runaround. No estimate that doubles when the truck pulls up.
Why Portcullis Gate Repair Is West Hollywood’s Preferred Gate Installation Company
Portcullis Gate Repair has operated as a Kingswell company since 2008, and every West Hollywood job carries the same four written promises: a price in writing before any bolt is turned, a real arrival window, a clean job site, and a written guarantee on the work. Dean Prescott, who leads our team, holds every technician to the Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails.
West Hollywood homeowners call us because the alternatives have already burned them. A gate company that no-shows, a quote that doubles at the door, a repair that fails six weeks later. Our technicians are background-checked and uniformed, and we service nine major gate-operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The tech who arrives at a West Hollywood address already knows the specific system on the property.
Beyond the residential work, West Hollywood has an operational reality most cities don’t: the Sunset Strip. Nightclubs, boutique hotels, and parking structures run gate systems around the clock, and a stuck vehicle gate at 3 AM is a security emergency. We answer the phone at 3 AM. That is not a marketing line. It is how we win commercial contracts in this city.
Gate Fabrication in West Hollywood
Gate fabrication in West Hollywood usually means a custom steel or wrought-iron gate built to match the ornamental ironwork on a 1920s-1940s courtyard building or a purpose-built pedestrian gate for a hillside bungalow, and it typically runs $1,800 to $6,200 depending on size, material, and the complexity of the scrollwork. We measure on site, fabricate to the exact opening, and install with posts set deep enough for the soil and slope. This is not an off-the-shelf gate dropped into an opening; this is steel cut, welded, and finished for a specific West Hollywood property.
Ornamental Wrought-Iron Matching
Older West Hollywood properties often have original ironwork that has been patched and modified for decades. When a hinge post fails or a pedestrian gate rusts through, the replacement has to match the neighboring iron or the whole facade looks wrong. We fabricate new gates and repair older ones with the same scroll profiles and bar spacing, so the new section reads as part of the original property rather than a bolted-on afterthought.
Heavy Bespoke Driveway Gates
A custom double swing gate in solid steel can weigh 500 pounds or more per leaf. On a flat lot, that is manageable with a standard operator. On a steep West Hollywood driveway, it is not. We size the steel, the hinges, the post footings, and the operator as one system, because that is the only way a gate that heavy opens smoothly without sagging into the ground after six months.
Automatic Gate Installation in West Hollywood
Automatic gate installation in West Hollywood pairs the fabricated gate with an operator, the motorized arm or drive unit that opens and closes it, plus the safety photocells, edge sensors, and control wiring required by UL 325. Most automatic installations run $4,200 to $9,500 all-in on standard lots, with hillside properties above the Sunset Strip commonly landing between $6,500 and $11,000 because the actuators, footings, and safety systems have to handle a grade that would destroy flat-lot hardware.
Operator Selection for Hillside Lots
West Hollywood’s steep driveways kill motors that were sized for Culver City. The actuator has to push a heavy gate uphill against gravity every single cycle, which means more torque, more heat, and faster wear on undersized units. We routinely spec Viking, DoorKing, or Elite operators with a heavier duty cycle for Sunset Plaza Drive and the surrounding streets, and we set them up for entrapment protection before the first test run.
Safety Systems and UL 325 Compliance
Every automatic gate we install in West Hollywood gets safety photocells at the entrapment zones, a reversing edge on the gate leaf, and proper warning signage. California law and UL 325 require these protections, and we will not wire an operator without them. A gate that can crush a pedestrian or trap a car is not finished. It is a liability sitting in your driveway.
Trusted Brands We Service in West Hollywood
We install and service Viking, DoorKing, Elite, and Ghost Controls operators among the nine brands we carry experience on, alongside LiftMaster, FAAC, BFT, Linear, and Mighty Mule. For West Hollywood customers, that means the technician who shows up already knows the operator on your property, and we keep common parts in local stock so a failed control board or actuator does not turn into a week-long wait. When a Sunset Strip parking gate goes down at 2 AM, the brand on the box matters less than the speed of the fix, but knowing the brand means we carry the right replacement on the truck.
Common Gate Installation Problems We See in West Hollywood Homes
- Steep driveway grades destroying flat-lot operators. A gate motor sized for a level Culver City driveway will burn out fast on Sunset Plaza Drive. We see it constantly: someone installs a standard-residential actuator on a 20% grade, and the motor cooks itself within a year because it is fighting gravity every cycle.
- Marine-layer corrosion on north-facing ironwork. West Hollywood sits far enough inland that nobody expects rust, but the seasonal marine layer leaves north-facing gate hardware damp through the morning, and that moisture accelerates corrosion on exposed steel and iron. Gates that face north on a shaded hillside lot rust years faster than the same iron on a south-facing street.
- Undersized post footings on older ornamental gates. The 1920s-1940s housing stock in West Hollywood often has beautiful wrought-iron pedestrian gates bolted onto posts that were never designed for the weight of an automatic operator. The post flexes, the hinges sag, and the gate starts dragging. We reinforce the footing before we mount anything to it.
- Piecemeal modifications compounding over decades. A courtyard gate in West Hollywood might have three generations of hardware bolted on: an original latch, a 1980s intercom, a 2010s keypad, and now an automatic opener. Each layer added weight and stress the original posts were never built for, and the system fails at the oldest, weakest point.
Pricing for Gate Installation in West Hollywood, CA
Here are the honest ranges for West Hollywood work. A standard single swing driveway gate with a Viking or DoorKing operator runs $4,200 to $7,800 on a flat lot. A double swing gate in steel or wrought iron runs $6,500 to $11,000 on a hillside grade. A custom ornamental pedestrian gate, fabricated to match existing iron and installed with a reinforced post, runs $1,800 to $6,200 depending on size and scrollwork. A sliding gate on a track runs $3,800 to $8,500.
What swings the number: the driveway grade, the gate weight, the post condition, the operator duty cycle, and whether we are pulling power to a new location or using existing conduit. Every job gets a written price before any work starts. You will see the number on paper, agree to it, and the invoice will match it. Call (940) 412-7340 for a free measure and a written estimate.
We Also Serve Cities Near West Hollywood
Portcullis Gate Repair handles Gate Installation work across the metro, and our West Hollywood crews regularly run calls into Beverly Hills, Culver City, Glendale, and Burbank. If you are just outside the city limits and need the same written-price, written-guarantee standard, West Hollywood is our home base for this part of the county. Call and we will tell you straight whether we can reach your address today.
Serving West Hollywood, CA - Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in West Hollywood
A heavy bespoke gate on a West Hollywood hillside driveway needs a heavier-duty operator because the motor is pushing the gate uphill against gravity on every opening cycle, which generates far more heat and mechanical stress than a flat-lot installation. We size the actuator for the gate weight plus the grade, and we recommend the higher-torque units from Viking, DoorKing, or Elite for Sunset Plaza Drive and similar slopes. Call (940) 412-7340 and we will spec the right operator for your driveway grade, not the one that fits a flat Culver City lot.
The marine layer leaves north-facing iron and steel gate hardware damp through the morning, and that repeated moisture drives corrosion faster than homeowners expect in a dry Southern California climate. We see it most on shaded hillside lots where the gate never fully dries out. The fix is proper priming and powder coating on new fabrications, plus stainless hinges and fasteners where the gate faces north. Call for an inspection and we will tell you what is rusting and what is worth saving.
Yes. We fabricate ornamental gates to match the existing wrought iron on older West Hollywood properties, matching the scroll profiles, bar spacing, and finish so the new gate reads as original to the property rather than a bolted-on replacement. This matters most on 1920s-1940s Spanish Colonial and courtyard buildings, where a mismatched gate is visible from the street. Call (940) 412-7340 and we will come measure and show you options in steel and iron.
California and UL 325 require safety photocells at the entrapment zones, a reversing edge on the gate leaf, and visible warning signage on every automatic gate installation in West Hollywood. We install these protections on every job and will not wire an operator without them, because an automatic gate without entrapment protection is a crushing hazard. Every Portcullis gate includes the full safety package as standard, not as an add-on.
Steep Sunset Strip-area driveways usually require deeper and wider post footings than flat-lot work, because the posts are holding a heavy gate against both gravity and lateral load from the slope. We set footings with the concrete depth and reinforcement needed for your specific grade and gate weight, and we do not reuse an old hinge post that was poured for a lighter, manual gate. Call (940) 412-7340 for a free on-site measure and we will tell you exactly what the footing work involves.
If your gate no longer opens when you need it to leave, or you want a new gate built for a West Hollywood property, call Portcullis Gate Repair at (940) 412-7340. A live person answers, day or night. We will schedule a free measure, hand you a written price before any work starts, and stand behind the installation with our 365-Day Done Right Promise, written on the invoice.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving West Hollywood since 2008.